# Fosroc Workspace - Complete Catalog

> Fosroc is a globally recognized British heritage brand specializing in construction chemicals, with over 80 years of expertise. In Australia and New Zealand, Fosroc products are manufactured and distributed under license by Parchem Construction Supplies Pty Ltd, a wholly owned subsidiary of DuluxGroup Limited. The company provides specialist construction chemicals including concrete repair mortars, waterproofing systems, engineering grouts, industrial flooring solutions, joint sealants, and protective coatings.

## Table of Contents

- [Products](#product) (187)
- [Organizations](#organization) (1)
- [Local Businesses](#local-business) (1)
- [Articles](#article) (18)
- [Collection Pages](#collection-page) (105)

---

## Products

### [Nitoseal SC140 - One-Component Silicone Sealant/Adhesive](https://fosroc.directory.norg.ai/construction-materials-supplies/sealants-adhesives/nitoseal-sc140-one-component-silicone-sealantadhesive/)

**Type:** Product  
Fast curing, tough, pick and abrasion resistant, one-component silicone sealant/adhesive for civil and industrial applications. Nitoseal SC140 is a one part, gun applied, neutral cure silicone sealant which cures very rapidly to form a durable, weathertight seal. Remains permanently flexible and weatherproof under a wide range of climatic conditions. Ideal for trafficable floor joints, assembly of metal framed buildings, cover plates and covings, bolted lap joints, and high security establishments.  

### [Concure WB30 - Water Based Wax Emulsion Curing Compound](https://fosroc.directory.norg.ai/construction-materials-supplies/concrete-curing-treatment-products/concure-wb30-water-based-wax-emulsion-curing-compound/)

**Type:** Product  
Concure WB30 is a water based wax emulsion used to retain moisture in concrete for effective curing. Used for concreting generally but especially useful for large areas of concrete construction such as runways, motorways or bridgeworks. Conforms to AS3799. Reduces surface shrinkage and cracking by eliminating moisture loss from exposed surfaces, increases concrete strength and dusting resistance, eliminates the need for damp hessian, sand or polythene, enables rapid film formation and efficient concrete hydration. Non-flammable.  

### [Nitocote EP410 - Highly Chemical Resistant Epoxy Coating System](https://fosroc.directory.norg.ai/construction-materials/protective-coatings/nitocote-ep410-highly-chemical-resistant-epoxy-coating-system/)

**Type:** Product  
Nitocote EP410 is a highly chemical resistant, high build, solvent free, two pack epoxy coating for concrete and steel. Available in grey and white colours. Provides protection to concrete and steel structures in aggressive chemical exposure or immersion conditions such as process plants and sewage works. Features excellent adhesion, film build, and abrasion resistance. Easily applied by brush, roller or suitable airless spray equipment.  

### [Nitomortar AP - AU - Multi-Purpose Epoxy Adhesive Repair Paste](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-bonding-products/nitomortar-ap-au-multi-purpose-epoxy-adhesive-repair-paste/)

**Type:** Product  
A 2-component epoxy paste for patching repairs to concrete and bonding of precast concrete components. Provides strength, impermeability to water, and resistance to aggressive chemicals. Ideal for setting starter bars, dowels, anchoring, and as an adhesive for Nitofill LV crack injection system and Expoband F bonding. Features excellent resistance to abrasion and impact, unaffected by acids, alkali and industrial chemicals, and can be used on saturated surface dry (SSD) concrete.  

### [Nitoflor Anti-Slip Grains 21 - Calcined Bauxite Grit](https://fosroc.directory.norg.ai/construction-materials/flooring-additives-aggregates/nitoflor-anti-slip-grains-21-calcined-bauxite-grit/)

**Type:** Product  
Nitoflor Anti-Slip Grains 21 are #16/30 Calcined Bauxite aggregate with an angular profile to provide positive traction on resinous floor finishes such as Nitoflor PU600 / PU200. Ideal for wet zones and floors requiring hot water or steam cleaning. Non-staining, chemically resistant, and thermal resistant. Pre-packaged and ready for immediate site use.  

### [Primer 21 - Fosroc](https://fosroc.directory.norg.ai/construction-materials/surface-primers-sealers/primer-21-fosroc/)

**Type:** Product  
Primer 21 is a single component primer used on porous surfaces with Nitoseal PU250 & Nitoseal PU400 when priming is required. Fast drying primer that enables sealant work to progress without mixing required.  

### [Nitoflor FC150 HP-SL Colour Pot - Epoxy Floor Coating Pigment](https://fosroc.directory.norg.ai/construction-materials/flooring-coatings-additives/nitoflor-fc150-hp-sl-colour-pot-epoxy-floor-coating-pigment/)

**Type:** Product  
Nitoflor FC150 HP/SL Colour Pots are concentrated colour pigments for use with Nitoflor FC150 HP/SL epoxy resin topping and floor coating. Available in 13 colours including 11 Australian Standard AS2700 colours. Features fast dispersion into the neutral base component and pre-measured dispensing for accurate application. Special colours available on request with minimum order quantity of 40 pots and 14-21 day lead time.  

### [Nitoflor Anti-Slip Grains 11 - Aluminium Oxide Aggregate](https://fosroc.directory.norg.ai/construction-materials/flooring-additives-aggregates/nitoflor-anti-slip-grains-11-aluminium-oxide-aggregate/)

**Type:** Product  
Nitoflor Anti-Slip Grains 11 are #16 Aluminium Oxide aggregate with an angular profile to provide positive traction on resinous floor finishes such as Nitoflor PU600 / PU200. Ideal for wet zones and floors requiring hot water or steam cleaning. Non-staining, chemically resistant, pre-packaged and ready for immediate site use.  

### [Nitoflor N - Novolac Epoxy Floor Coating](https://fosroc.directory.norg.ai/construction-materials/floor-coatings-sealers/nitoflor-n-novolac-epoxy-floor-coating/)

**Type:** Product  
Highly chemically resistant novolac epoxy clear binder floor coating system. Two-part solvent-free epoxy coating producing a highly wear-resistant finish suitable for mining processing areas, chemical plant floors, industrial plant floors, and chemical plant bunding. Features high chemical resistance, fast cure properties, and excellent wear and abrasion resistance.  

### [Nitoseal SC820 - Low Modulus Silicone Joint Sealant](https://fosroc.directory.norg.ai/construction-materials/sealants-adhesives/nitoseal-sc820-low-modulus-silicone-joint-sealant/)

**Type:** Product  
Nitoseal SC820 is a low modulus, self-smoothing, one component silicone joint sealant with Roadseal® technology. Used for sealing sawn abutment joints between concrete and asphalt roads and pavements. Ready to use with no mixing required, offering excellent adhesion to clean dry concrete and sawn asphalt, excellent weathering resistance (UV and ozone resistant), and large joint movement accommodation (±100/-50%).  

### [Preco Form Creme - Non-Drip Form Release Agent](https://fosroc.directory.norg.ai/construction-materials-supplies/concrete-formwork-additives/preco-form-creme-non-drip-form-release-agent/)

**Type:** Product  
Ready to use, non-drip, form release creme for application to steel hinges or vertical forms used for precast concrete. Prevents concrete penetration into steel hinges and rust staining, prevents distortion, resists transfer of splinters into concrete, and resists exposure to weather conditions for several days prior to a concrete pour.  

### [Nitoflor FC150 HP-SL - High Performance Epoxy Floor Coating](https://fosroc.directory.norg.ai/construction-materials/floor-coatings-sealers/nitoflor-fc150-hp-sl-high-performance-epoxy-floor-coating/)

**Type:** Product  
High performance, 100% solids epoxy floor coating that can be used as either a high build epoxy coating or as a self-levelling floor topping. Produces a satin finish and is highly resistant to chemical attack and abrasion. Non-taint during and after application, low VOC, and HACCP certified for use in food preparation and processing areas. Available in multiple pack sizes (8L and 16L) and 13 colour options including Australian Standard AS2700 colours.  

### [Nitobond SBR - Water Resistant Polymer Additive](https://fosroc.directory.norg.ai/construction-materials/concrete-additives-bonding-agents/nitobond-sbr-water-resistant-polymer-additive/)

**Type:** Product  
Nitobond SBR is a water resistant polymer additive for improving strength and adhesion of concrete repair mortars, cementitious floor toppings and screeds, waterproof renders and cementitious slurries. Provides excellent bond to concrete, masonry, stonework, plaster and blockwork with improved tensile and flexural properties.  

### [Nitoflor Anti-Slip Grains 31 - Silicon Carbide Floor Hardener](https://fosroc.directory.norg.ai/construction-materials/floor-hardeners-aggregates/nitoflor-anti-slip-grains-31-silicon-carbide-floor-hardener/)

**Type:** Product  
High purity, chemically treated silicon carbide grains for slip and wear resistance on concrete floors. Shaped to resist breakup under traffic conditions. Provides maximum slip resistance, non-staining, chemically resistant surface finish. Ideal for schools, hospitals, public buildings, factories, fire escapes, stairways, entrances, loading ramps, and machine surrounds.  

### [Nitoflor Sicaltop - Silicon Carbide Floor Hardener](https://fosroc.directory.norg.ai/construction-materials/floor-hardeners-coatings/nitoflor-sicaltop-silicon-carbide-floor-hardener/)

**Type:** Product  
Silicon carbide/alumina dry shake on floor hardener. Provides a non-rusting, extremely hard wearing, abrasion and slip resistant surface to new concrete floors. Ideally suited to industrial areas subject to the heaviest traffic, including loading bays, trucking lanes, car parks, warehouse floors, repair workshops, and machine shops.  

### [Nitofill PU150 - Multi-purpose Hydrophilic Polyurethane Injection Grout](https://fosroc.directory.norg.ai/construction-materials/sealants-grouts/nitofill-pu150-multi-purpose-hydrophilic-polyurethane-injection-grout/)

**Type:** Product  
Nitofill PU150 is a multi-purpose hydrophilic polyurethane injection resin which reacts with available water to initiate expansion in the product to seal leaking cracks and joints in concrete and fill voids in generally inaccessible locations. Features high tensile adhesion, expands up to 25 times initial volume, solvent-free and environmentally safe. Excellent adhesion to concrete, brick and mortar. Resistant to most organic solvents, mild acids and alkalis. Complies to AS/NZS 4020:2005.  

### [Nitoflor Anti-Slip Grains 02 - Silica Sand Grit for Epoxy Floors](https://fosroc.directory.norg.ai/construction-materials/flooring-additives-coatings/nitoflor-anti-slip-grains-02-silica-sand-grit-for-epoxy-floors/)

**Type:** Product  
Silica sand grit for slip resistance on epoxy floors. Nitoflor Anti-Slip Grains 02 are used in the application of epoxy roll coats on floors to make the surface slip resistant. Suitable for use in public buildings on fire escapes, stairways, entrances, loading ramps, and machine surrounds in factories where slip resistance may be necessary. Provides effective slip resistance, is chemically inert, and is applied at the time of epoxy coating.  

### [Nitoprime Zincrich - Zinc-Rich Epoxy Resin Primer](https://fosroc.directory.norg.ai/construction-materials/protective-coatings-primers/nitoprime-zincrich-zinc-rich-epoxy-resin-primer/)

**Type:** Product  
Nitoprime Zincrich is a zinc-rich epoxy resin primer recommended as an anti-corrosion primer for exposed steel reinforcement for use with Renderoc concrete repair mortars. The product actively resists corrosion within the confines of the repair location and helps prevent the generation of incipient anodes in immediately adjacent locations. Single component product that is easy to use with no restrictive pot-life, touch dry after 15-45 minutes.  

### [Conbextra HF - High Flow Cementitious Precision Grout](https://fosroc.directory.norg.ai/construction-materials/grouting-products/conbextra-hf-high-flow-cementitious-precision-grout/)

**Type:** Product  
Conbextra HF is a dual shrinkage compensated high flow cementitious precision grout for gap thicknesses up to 125 mm. Features excellent flow retention properties, rapid strength gain, and high ultimate strength with low permeability. Suitable for precision grouting applications where high flow and long flow property retention is required. Hydrogen-free gaseous expansion, chloride free, and suitable for pumping or pouring.  

### [Guncrete E - High Strength Dry-Spray Concrete Repair Mortar](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-products/guncrete-e-high-strength-dry-spray-concrete-repair-mortar/)

**Type:** Product  
Guncrete E is a high strength, low shrinkage, high build dry-spray applied concrete repair mortar supplied as a ready to use dry powder for use with standard dry spray gunite or shotcrete equipment. Ideal for large vertical or overhead repairs with advantages including high build formulation, high early strength, low drying shrinkage, low rebound, and chloride-free composition. Meets EN1504-3 Class R4 requirements with 28-day strength of 84MPa.  

### [Expoband F - Flexible Polyolefin Joint Bandage Membrane](https://fosroc.directory.norg.ai/construction-materials/waterproofing-sealants/expoband-f-flexible-polyolefin-joint-bandage-membrane/)

**Type:** Product  
Expoband F is a highly flexible, chemically resistant polyolefin (FPO) joint bandage membrane system. Available in 1mm and 2mm thicknesses with widths of 100mm, 150mm, 200mm, 250mm, and 300mm (special widths up to 500mm available on request). Supplied in 20m rolls. Forms a tough, flexible joint flashing that accommodates continuous and pronounced cyclic movement. Excellent resistance to UV and weathering. Complies with AS4020:2018 for potable water applications. Used to seal joints in car park decks, podiums, balconies, walkways, and water immersed applications such as tanks, sewers, reservoirs, pipelines, and swimming pools.  

### [Conbextra BB92 Ultra-High Performance Grout](https://fosroc.directory.norg.ai/construction-materials/grouting-products/conbextra-bb92-ultra-high-performance-grout/)

**Type:** Product  
Ultra-high performance grout specifically designed for structural grouted connections for wind turbine foundations and oil and gas installations. Non-shrink formula with high flexural strength and modulus of elasticity. Suitable for pumping or pouring with no segregation or bleeding. 28-day strength of 90-100 MPa at 20°C.  

### [Nitoseal MS400 - UV Resistant Elastomeric Joint Sealant](https://fosroc.directory.norg.ai/construction-materials/sealants-adhesives/nitoseal-ms400-uv-resistant-elastomeric-joint-sealant/)

**Type:** Product  
Nitoseal MS400 is a UV resistant, trafficable, high strength, elastomeric joint sealant for trafficable and general construction joints using Duraflex® technology. Australian made, this silyl modified polymer polyurethane hybrid sealant combines the weathering and adhesion performance of silicone with the toughness of polyurethane. Contains no isocyanates and is very low VOC (15g/L). Available in Black, Concrete Grey, and White with 40% joint movement capability.  

### [Dekguard E2000 - Elastomeric Protective Coating for Concrete and Masonry](https://fosroc.directory.norg.ai/construction-materials/protective-coatings/dekguard-e2000-elastomeric-protective-coating-for-concrete-and-masonry/)

**Type:** Product  
Dekguard E2000 is a crack-accommodating, water-based pigmented protective coating which provides excellent elongation and recovery, resistance to chloride ion ingress, carbonation, UV light and rain. Suitable for use on all types of structures including those in coastal environments, especially where there is a danger of subsequent cracks appearing within the substrate.  

### [Form Release Agent - Fosroc](https://fosroc.directory.norg.ai/construction-materials-supplies/concrete-formwork-additives/form-release-agent-fosroc/)

**Type:** Product  
Economical, general purpose formwork and mould release agent used in pre-cast and in-situ concrete construction. Suitable for steel, wood or paper forms. Non-staining formula that minimises form stripping time and maximises life of formwork.  

### [Renderoc HB40 Plus - Extra High Build Repair Mortar](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-restoration/renderoc-hb40-plus-extra-high-build-repair-mortar/)

**Type:** Product  
Renderoc HB40 Plus is an extra high build, shrinkage compensated repair mortar conforming to EN1504-3 Class R3. Compatible with concrete 25-50 MPa, suitable for vertical and overhead patch repairs with low permeability and high resistivity characteristics. Features high strength for structural repairs, abrasion resistance, and can be applied via trowel or wet spray process.  

### [Nitoflor HD-S - Low Sheen Liquid Floor Hardener & Densifier](https://fosroc.directory.norg.ai/construction-materials/concrete-treatments-sealers/nitoflor-hd-s-low-sheen-liquid-floor-hardener-densifier/)

**Type:** Product  
Nitoflor HD-S is a low sheen liquid floor hardener and densifier system for concrete floors. Used in conjunction with Nitoflor HD to improve stain resistance and provide higher sheen level finish. Ideal for polished concrete applications. Hardens and reduces dusting of concrete with defined sheen levels, durable and stain resistant properties. Suitable for manufacturing facility floors, warehouse floors, restaurants, retail environments, supermarkets, and storage facility floors.  

### [Nitoprime 120 Water-Based Primer for Porous Substrates](https://fosroc.directory.norg.ai/construction-materials-supplies/primers-surface-preparation/nitoprime-120-water-based-primer-for-porous-substrates/)

**Type:** Product  
Nitoprime 120 is a single component fast drying water-based primer that provides excellent high bonding and penetrating properties into concrete and masonry surfaces before applying Nitoproof water based membranes. Suitable for internal and external priming applications. Low VOC, solvent free, non-flammable and free of hazardous odours.  

### [Preco RWB - Surface Revealing Liquid for Exposed Aggregate Finish](https://fosroc.directory.norg.ai/construction-materials-chemicals/concrete-finishing-treatment-products/preco-rwb-surface-revealing-liquid-for-exposed-aggregate-finish/)

**Type:** Product  
Preco RWB is a surface revealing liquid used to reveal aggregate in freshly placed horizontal concrete to produce an exposed aggregate finish, or a key for subsequent pours or renders. Provides uniform and controlled depth of retardation with flexible time factor up to 24 hours. Ideal for floors, precast walls, slabs, and paving applications.  

### [Proofex Sheetdrain 81 - HDPE Dimpled Drainage Membrane](https://fosroc.directory.norg.ai/construction-materials/waterproofing-drainage-membranes/proofex-sheetdrain-81-hdpe-dimpled-drainage-membrane/)

**Type:** Product  
High-density polyethylene (HDPE) dimpled protection and drainage membrane used for the protection and drainage of waterproofing membranes on foundations which are subsequently backfilled. Lightweight and easy to carry with high drainage and filtering capacity. Excellent separating layer that is not damaged by chemical agents present in soil and will not affect drinking water.  

### [Conbextra EP300 DP - Low Exotherm Three Part Epoxy Resin Grout](https://fosroc.directory.norg.ai/construction-materials/epoxy-grouts-resins/conbextra-ep300-dp-low-exotherm-three-part-epoxy-resin-grout/)

**Type:** Product  
A 3 component epoxy grout for use in applications where heavy dynamic or mobile loads are encountered with gaps up to 300mm. Particularly well suited to applications where long working time and/or large volume grouting is required. Suitable for reciprocating machinery, testing equipment, heavy crane and transporter rails, high speed turbines, centrifuges, drop forges, and pile head waterproofing. Resistant to oil, grease, fats, most chemicals, mild acids and alkalis, fresh water and sea water.  

### [Nitocote SN508 Creme - Thixotropic Water Repellent Treatment](https://fosroc.directory.norg.ai/construction-materials/concrete-protection-sealers/nitocote-sn508-creme-thixotropic-water-repellent-treatment/)

**Type:** Product  
Nitocote SN508 Creme is a thixotropic, water dispersed emulsion of iso-octyltriethoxysilane for use as a penetrating water repellent treatment for concrete. Provides outstanding penetration, chemically bonds to concrete substrates, and offers drastic reduction in capillary water absorption. Ideal for protecting reinforced concrete used in bridges, wharves, roads, and atmospherically exposed concrete buildings and structures.  

### [Conbextra C - AU - Dual Shrinkage Compensated Cementitious Grout](https://fosroc.directory.norg.ai/construction-materials/grouting-products/conbextra-c-au-dual-shrinkage-compensated-cementitious-grout-1/)

**Type:** Product  
Conbextra C is a dual shrinkage compensated, high flow cementitious grout for gap thicknesses from 10 mm up to 100 mm. Suitable for use as a flowable or trowel applied grout under baseplates and other applications requiring precision high flow grout. Features dual expansion system, high ultimate strength, low permeability, and can be dry packed, trowelled, flowed or pumped.  

### [Concure CR - Chlorinated Rubber Based Concrete Curing Compound](https://fosroc.directory.norg.ai/construction-materials/concrete-treatments-curing-compounds/concure-cr-chlorinated-rubber-based-concrete-curing-compound/)

**Type:** Product  
Concure CR is a solvent-based chlorinated rubber curing compound ideal for industrial concrete floors. Used on freshly laid concrete floors and for curing vertical concrete areas immediately after form stripping. Enables efficient concrete hydration, complies with Australian Standards AS 3799, achieves 90% or greater water retention, increases concrete strength and dusting resistance, and eliminates the need for damp hessian, sand or polythene.  

### [Conbextra C - AU - Dual Shrinkage Compensated Cementitious Grout](https://fosroc.directory.norg.ai/construction-materials/grouting-products/conbextra-c-au-dual-shrinkage-compensated-cementitious-grout/)

**Type:** Product  
Conbextra C is a dual shrinkage compensated, high flow cementitious grout for gap thicknesses from 10 mm up to 100 mm. Can be used as a flowable or trowel applied grout. Suitable for use under baseplates and other applications where a precision high flow grout is required. Features dual expansion system, high ultimate strength, low permeability, and hydrogen free gas expansion.  

### [Nitoflor FC130 - Water-Based Epoxy Floor Coating](https://fosroc.directory.norg.ai/construction-materials/floor-coatings/nitoflor-fc130-water-based-epoxy-floor-coating/)

**Type:** Product  
Water-based, low odour two part epoxy coating for concrete floors and walls. Produces an easily cleaned, dustproof surface with good resistance to most oils and liquids. Durable with good abrasion resistance, economical to apply, and suitable for warehouse floors, garage floors, light industrial floors, food production floors, kitchens, and areas with pedestrian and light vehicular traffic.  

### [Nitoflor FC150 HP-SL Colour Pot - Epoxy Floor Coating Pigment](https://fosroc.directory.norg.ai/construction-materials-supplies/flooring-coatings-additives/nitoflor-fc150-hp-sl-colour-pot-epoxy-floor-coating-pigment/)

**Type:** Product  
Concentrated colour pigment for use with Nitoflor FC150 HP/SL epoxy resin topping and floor coating. Available in 13 colours including 11 Australian Standard AS2700 colours. Features fast dispersion into the neutral base component and pre-measured dispensing for accurate application. Special colours available on request with minimum order quantity of 40 pots and 14-21 day lead time.  

### [Proofex Torchseal A500 - Torch Applied Waterproofing Membrane](https://fosroc.directory.norg.ai/construction-materials/waterproofing-membranes/proofex-torchseal-a500-torch-applied-waterproofing-membrane/)

**Type:** Product  
Torch applied 3.5mm thick, reinforced elastoplastomeric polymer bitumen waterproofing membrane. APP polymer modified specifically selected for Australian conditions. Handles ponding and permanently wet conditions with no curing times. Instantly waterproof with uniform thickness and excellent durability and flexibility. Ideal for waterproofing foundations, basements, tunnels, terraces and roofs.  

### [Primer 4 - Non-Porous Surface Primer by Fosroc](https://fosroc.directory.norg.ai/construction-materials/surface-primers-adhesives/primer-4-non-porous-surface-primer-by-fosroc/)

**Type:** Product  
Primer 4 is a fast-drying, single-component primer used on non-porous surfaces with Thioflex 600 and other joint sealants. Enables sealant work to progress quickly without requiring mixing. Ideal for construction applications requiring reliable surface preparation.  

### [Vector Galvashield Fusion T2 - Self-Powered Dual Phase Hybrid Anode](https://fosroc.directory.norg.ai/construction-materials/corrosion-protection-systems/vector-galvashield-fusion-t2-self-powered-dual-phase-hybrid-anode/)

**Type:** Product  
Galvashield Fusion T2 combines an impressed current electrochemical treatment system with the long term maintenance-free capabilities of an alkali-activated galvanic cathodic prevention system. The single-unit system does not require complex wiring or an external DC power supply. Control corrosion in reinforced concrete structures such as multi-story carparks, bridge decks, columns & beams, marine piers and wharves.  

### [Thioflex 600 - Fuel Resistant Polysulphide Joint Sealant](https://fosroc.directory.norg.ai/construction-materials/sealants-joint-fillers/thioflex-600-fuel-resistant-polysulphide-joint-sealant/)

**Type:** Product  
Thioflex 600 is a fuel resistant, two-component, polysulphide joint sealant available in Gun Grade and Pouring Grade formulations. Forms a tough, elastic, rubber-like seal that accommodates continuous and pronounced cyclic movement (±30%). Ideal for sealing movement joints in concrete structures including roads, bridges, and airfields.  

### [Dekguard Elastic - Elastomeric Protective Coating for Concrete and Masonry](https://fosroc.directory.norg.ai/construction-materials/protective-coatings/dekguard-elastic-elastomeric-protective-coating-for-concrete-and-masonry/)

**Type:** Product  
Crack accommodating elastomeric, pigmented acrylic, chloride ion and carbonation protective coating for concrete and masonry. Suitable for use on all types of structures including those in coastal environments. Can accommodate substrate cracking up to 6mm and cyclic movement up to 1mm with excellent elongation and recovery properties maintained at sub-zero temperatures.  

### [Nitocote SN511 - Penetrating Silane Water Repellent Treatment](https://fosroc.directory.norg.ai/construction-materials/concrete-protection-sealers/nitocote-sn511-penetrating-silane-water-repellent-treatment/)

**Type:** Product  
Nitocote SN511 is a low viscosity, isobutyltriethoxy silane penetrating silane water repellent treatment. It penetrates deeply into porous substrates, reducing absorption of water and water-borne salts while permitting passage of water vapour. Especially suitable for protecting concrete structures in marine and coastal environments. Provides 95% reduction in chloride ion penetration and 80% reduction in water absorption.  

### [Nitomortar 908 - Epoxy Patch Repair Mortar](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-patching/nitomortar-908-epoxy-patch-repair-mortar/)

**Type:** Product  
General purpose, high strength, epoxy patch repair mortar. A blend of silica aggregates and epoxy resin that cures to form an impermeable repair unaffected by many forms of chemical attack. Supplied as a two-part colour blended material in pre-weighed quantities ready for on-site mixing and use. Features early development of initial hardness, up to 90MPa compressive strength, and versatile mixing consistencies for a wide range of applications.  

### [Vandex Construction Joint Tape - Synthetic Rubber Waterproofing Tape](https://fosroc.directory.norg.ai/construction-materials/waterproofing-sealants/vandex-construction-joint-tape-synthetic-rubber-waterproofing-tape/)

**Type:** Product  
Vandex Construction Joint Tape is a synthetic rubber strip, approximately 0.7 mm thick which bridges and seals construction joints and cracks in concrete structures. Can be applied onto damp substrate, resistant to hydrostatic pressure, and permanently flexible. Installed using Vandex BB75E-Z or Cemelast waterproofing slurry.  

### [Conbextra Deep Pour - Cementitious Grout](https://fosroc.directory.norg.ai/construction-materials/grouting-products/conbextra-deep-pour-cementitious-grout/)

**Type:** Product  
Flowable, precision cementitious grout for high volume and deep pours (gaps 20mm to 500mm thickness). A high flow, dual shrinkage compensated cementitious grout featuring unique non-metallic dual expansion system, excellent initial flow and flow retention, high ultimate strength and low permeability. Suitable for pumping or pouring over a large range of application consistencies and temperatures.  

### [Renderoc FC - Cementitious Fairing Mortar 20kg](https://fosroc.directory.norg.ai/building-construction-materials/concrete-repair-finishing-products/renderoc-fc-cementitious-fairing-mortar-20kg/)

**Type:** Product  
Renderoc FC cementitious fairing coat is designed for application in thin layers up to 3 mm, to produce a fair-faced appearance to concrete surfaces or masonry surfaces in readiness to receive a protective/decorative coating. RCS (Respirable Crystalline Silica) Hazard Free. Contains <0.1% RCS. Pre-blended to overcome site-batched variations - only the site addition of clean water is required. Contains no chloride admixtures. Excellent bond to concrete substrate with easy application and no independent primer or curing membrane necessary.  

### [Nitoproof Top Coat UV - Water-Based Acrylic Hybrid Membrane](https://fosroc.directory.norg.ai/construction-materials/waterproofing-coatings/nitoproof-top-coat-uv-water-based-acrylic-hybrid-membrane/)

**Type:** Product  
Water based acrylic hybrid membrane top coat for UV exposed applications. Nitoproof Top Coat UV is an acrylic hybrid hard wearing top coat designed for external applications on horizontal surfaces. Features outstanding adhesion properties and excellent UV weather resistance. Suitable for use as a trafficable top coat over Nitoproof 410 and Nitoproof 810 membranes for roofs and deck areas.  

### [Conbextra HS - Ultra High Strength Flowable Grout](https://fosroc.directory.norg.ai/construction-materials/grouting-products/conbextra-hs-ultra-high-strength-flowable-grout/)

**Type:** Product  
Conbextra HS is a dual shrinkage compensated, high flow cementitious grout used for grouting applications where rapid strength gain and high ultimate strength is a pre-requisite. Features non-metallic dual expansion system, excellent initial flow and flow retention, rapid strength gain, high ultimate strength and low permeability. Compressive strength of 26 MPa @ 8 hours and 95 MPa @ 28 days when mixed at flowable consistency. Suitable for grouting machine bases where quick back to service is required and/or high ultimate compressive strength.  

### [Renderoc G - Geopolymer Repair Mortar](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-protection/renderoc-g-geopolymer-repair-mortar/)

**Type:** Product  
Renderoc G is a geopolymer repair mortar and lining system with high chemical and acid resistance for use in highly corrosive environments such as acid bunds or in sugar, dairy and wine processing industries and concrete eroded from soft water degradation. Features excellent long-term chemical resistance, high compressive, flexural and tensile strength, and can be applied by trowel, wet or dry spray methods.  

### [Supercast Predimax Injection Hose System - 11mm x 100m](https://fosroc.directory.norg.ai/construction-materials/concrete-protection-waterproofing/supercast-predimax-injection-hose-system-11mm-x-100m/)

**Type:** Product  
Double-walled, patented PVC injection hose for protection against potential and active leaks in construction and cold joints in concrete. Durable, robust and fully resistant to continuous immersion in groundwater, saline, sewage, alkalis, acids, petrol, diesel and alcohol. Features staggered exit openings to prevent cement paste entry during concrete placement. Includes inlet and outlet vents (White/Red) for ease of identification. Suitable for water excluding structures, water retaining structures, sewage treatment plants, and below ground concrete construction.  

### [Proofex 6100 - Bituminous Self-Adhesive Waterproofing Membrane](https://fosroc.directory.norg.ai/construction-materials/waterproofing-membranes/proofex-6100-bituminous-self-adhesive-waterproofing-membrane/)

**Type:** Product  
Woven polypropylene surfaced, bituminous self-adhesive waterproofing membrane. Self-adhesive installation without heating torches, suitable for hot asphalt application up to 165°C. Contains polypropylene mesh for strength and puncture resistance with selvedge strip for watertight longitudinal seals. Ideal for waterproofing concrete roads and bridges to be overlaid with asphalt.  

### [Vandex BB75-Z Cement-Based Waterproofing Render](https://fosroc.directory.norg.ai/construction-materials/waterproofing-products/vandex-bb75-z-cement-based-waterproofing-render/)

**Type:** Product  
Surface applied, cement based render waterproofing barrier for positive and negative water pressure applications. Ideal for waterproofing swimming pools, sewerage processing tanks, concrete block walls and masonry surfaces. Abrasion resistant, sulphate resisting, suitable for permanent sunlight exposure, and tested to withstand 70 metres positive water pressure head.  

### [Nitoproof 210 - Bituminous Waterproofing Membrane](https://fosroc.directory.norg.ai/construction-materials/waterproofing-products/nitoproof-210-bituminous-waterproofing-membrane/)

**Type:** Product  
Nitoproof 210 is a high performance single component water based bituminous rubberised liquid applied waterproofing membrane which contains root inhibiting additives. Ideal for waterproofing applications such as retaining walls, planter boxes, building foundation walls and below ground tanking structures. Features excellent cold flexibility, elongation, and resistance to ponding water with low VOC content.  

### [Conbextra EP10 - Low Viscosity Epoxy Grout](https://fosroc.directory.norg.ai/construction-materials/epoxy-grouts-adhesives/conbextra-ep10-low-viscosity-epoxy-grout/)

**Type:** Product  
A highly fluid epoxy grout for dynamic/repetitive load applications with gap width between 0.25-10mm. Conbextra EP10 is a low viscosity epoxy grout for grouting small gaps (<10mm) between a base plate and substrate, and can be used to fill hairline cracks in concrete slabs. Features high compressive, tensile and flexural strengths, resistant to repetitive dynamic loads, with fast convenient installation and early strength gain.  

### [Renderoc HB25 - High Build Repair Mortar](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-products/renderoc-hb25-high-build-repair-mortar/)

**Type:** Product  
Renderoc HB25 is a high build, shrinkage compensated concrete repair mortar for patching up to 1m² sections in concrete up to 30 MPa. It can be applied to vertical concrete patches up to 80mm deep. Suitable for use with Galvashield anode protection systems. Features polymer-modification for extremely low permeability to water, carbon dioxide and chlorides, with exceptional shrinkage compensation for long-term dimensional stability.  

### [Nitoproof 810 - Water-Based Polyurethane Waterproofing Membrane](https://fosroc.directory.norg.ai/construction-materials/waterproofing-membranes/nitoproof-810-water-based-polyurethane-waterproofing-membrane/)

**Type:** Product  
Nitoproof 810 is a highly flexible, water-based, single-component polyurethane waterproofing membrane designed for a wide range of waterproofing applications in the built environment. Suitable for internal and external wet areas, enabling direct fix of ceramic tiles. Features low VOC content (2 g/l), excellent elastic recovery (>355% elongation), and complies with AS/NZS 4654.1:2012. Can be flood tested after 48 hours at 23°C/50% RH.  

### [Proofex Torchseal A625 - Torch Applied Bitumen Waterproofing Membrane](https://fosroc.directory.norg.ai/building-construction-materials/roofing-waterproofing-membranes/proofex-torchseal-a625-torch-applied-bitumen-waterproofing-membrane/)

**Type:** Product  
Torch applied 4.5mm thick, mineral finish, reinforced polymer bitumen waterproofing membrane. Used as the top layer in a two layer membrane system or as a single roof membrane for both new and renovation work. APP polymer modified specifically selected for Australian conditions. Handles ponding and permanently wet conditions with no curing times and instant waterproofing.  

### [Polyurea SCS - Two Component Rapid Curing Polyurea Seam Sealant](https://fosroc.directory.norg.ai/construction-materials/waterproofing-sealants/polyurea-scs-two-component-rapid-curing-polyurea-seam-sealant/)

**Type:** Product  
Fosroc Polyurea SCS is a thixotropic rapid curing polyurea, designed as a seam seal for the Fosroc Proofex Engage waterproofing system. Gun grade, two-component polyurea in pre-packaged twin cartridge system. Flexible with rapid cure properties, ideal for sealing seams in Proofex Engage applications.  

### [Conbextra CB-C - High Flow Dual Shrinkage Compensated Cable Bolting Grout](https://fosroc.directory.norg.ai/construction-materials/grouting-bonding-products/conbextra-cb-c-high-flow-dual-shrinkage-compensated-cable-bolting-grout/)

**Type:** Product  
Conbextra CB-C is a Class A / Class C, dual shrinkage compensated, highly flowable and high strength grout. It can be used for various void fill applications including backfilling behind concrete tunnel segments, bottom up cable bolt grouting applications and general civil applications. Features high strength development allowing early tensioning of cables, dual expansion system compensating for shrinkage in both plastic and hardened states, hydrogen free gaseous expansion, and excellent pumpability over both flowable and thixotropic consistencies.  

### [Nitoprime 115 Water-Based Primer for Non-Porous Surfaces](https://fosroc.directory.norg.ai/construction-materials/primers-sealers/nitoprime-115-water-based-primer-for-non-porous-surfaces/)

**Type:** Product  
Water-based primer specifically designed with adhesion enhancing properties for use onto metallic, smooth, dense, and non-porous surfaces. Suitable as primer over non-porous surfaces for Nitoproof water-based membranes. Low VOC, non-flammable, free of hazardous odours, fast drying with excellent water resistance.  

### [Hydrotite - Premium Grade Water Swellable Hydrophilic Waterstop](https://fosroc.directory.norg.ai/construction-materials/waterproofing-sealants/hydrotite-premium-grade-water-swellable-hydrophilic-waterstop/)

**Type:** Product  
Hydrotite is a premium grade, water swellable, hydrophilic waterstop for use in cast in-situ concrete. It expands in a controlled fashion in the presence of moisture to create a pressure seal within construction joints in concrete structures. Features self-adhesive installation, co-extruded design for maximum seal, and is suitable for water retaining and water excluding structures.  

### [Nitofill Mechanical Packers and Coupler - Steel Injection System](https://fosroc.directory.norg.ai/construction-materials-supplies/concrete-repair-injection-systems/nitofill-mechanical-packers-and-coupler-steel-injection-system/)

**Type:** Product  
Steel injection packers and coupler for injecting polyurethane resins into cracked and leaking concrete structures. Nitofill Steel Packers are designed to be inserted into drilled holes and subsequently injected with expanding polyurethane foam to stop water leaks. Manufactured from steel for maximum strength with grease nipple valve for quick hose connection/disconnection. Can be left in place or removed after curing. Couplers are reusable.  

### [Nitoflor Anti-Slip Grains 01 - Coarse Silica Sand for Slip Resistant Floors](https://fosroc.directory.norg.ai/construction-materials/flooring-additives-coatings/nitoflor-anti-slip-grains-01-coarse-silica-sand-for-slip-resistant-floors/)

**Type:** Product  
Coarse silica sand grit for slip resistance on resinous floors. Nitoflor Anti-Slip Grains 01 are used in the application of epoxy roll coats on floors to make the surface slip resistant. Suitable for use in public buildings on fire escapes, stairways, entrances, loading ramps, and machine surrounds in factories. Provides effective slip resistance, is chemically inert, and can be applied at various rates to meet required slip resistance standards.  

### [Primer 7 - Fosroc](https://fosroc.directory.norg.ai/construction-materials/primers-sealant-preparation/primer-7-fosroc/)

**Type:** Product  
Primer 7 is a single component primer used on porous surfaces with Thioflex 600 Pouring Grade and Gun Grade sealants. Fast drying formula enables sealant work to progress efficiently. No mixing required.  

### [Nitoflor PU Colour - Polyurethane Flooring Pigment](https://fosroc.directory.norg.ai/construction-materials/flooring-coatings-finishes/nitoflor-pu-colour-polyurethane-flooring-pigment/)

**Type:** Product  
Colour pigments for use with Nitoflor PU200 and PU600 polyurethane flooring systems. Available in a variety of Australian Standard AS2700-2011 colours with specialty colours available on request. Ideal for industrial flooring applications requiring custom colour matching.  

### [Vector Galvashield CC - Galvanic Anode Corrosion Control System](https://fosroc.directory.norg.ai/construction-materials/concrete-protection-repair/vector-galvashield-cc-galvanic-anode-corrosion-control-system/)

**Type:** Product  
Embedded galvanic sacrificial anode grid system for corrosion control and protection in undamaged concrete. Galvashield CC is a discrete galvanic anode embedded within a specially formulated cementitious mortar. The unit is inserted into a pre-drilled hole and encapsulated within low resistivity mortar in a grid system for corrosion control and prevention of new corrosion activity in reinforced concrete structures.  

### [Patchroc C - Fast Setting Concrete Patch Repair Mortar](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-products/patchroc-c-fast-setting-concrete-patch-repair-mortar/)

**Type:** Product  
Patchroc C is a fast setting patch repair mortar for emergency reinstatement of localised patches between 25mm and 200mm deep in concrete pavements, airport aprons, access ramps, roadways and industrial situations. Single component product requiring only site addition of clean water. Achieves rapid strength gain with traffic acceptance in 2-4 hours.  

### [Nitofill LV - Low Viscosity Epoxy Crack Injection System](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-sealants/nitofill-lv-low-viscosity-epoxy-crack-injection-system/)

**Type:** Product  
Nitofill LV is a high strength, low viscosity resin injection system designed for injecting cracks in concrete to consolidate a structure or exclude water and air from contact with the reinforcement. This dual cartridge epoxy crack-injection system is suitable for structural crack repairs, allows penetration into the finest cracks, is non-shrink with excellent bond adhesion, and includes everything necessary to complete the crack injection.  

### [Vandex Uni-Mortar 1-Z - Cement Based Waterproofing Repair Mortar](https://fosroc.directory.norg.ai/construction-materials/waterproofing-repair-mortars/vandex-uni-mortar-1-z-cement-based-waterproofing-repair-mortar/)

**Type:** Product  
Cement based reprofiling and waterproofing repair mortar for 6mm to 12mm thickness applications. Primarily used for reprofiling new and old concrete and masonry surfaces prior to application of Vandex membranes. Highly abrasion resistant, approved for potable water contact, and tested to withstand 70 metres water head pressure at 10mm thickness.  

### [Proofex OFB - TPO Waterproofing Membrane](https://fosroc.directory.norg.ai/building-construction-materials/waterproofing-membranes/proofex-ofb-tpo-waterproofing-membrane/)

**Type:** Product  
Proofex OFB is a TPO/FPA (Thermoplastic Polyolefin Flexible Polypropylene Alloy) fleece-backed reinforced membrane for fully bonded waterproof membrane systems. Suitable for building and civil engineering structures, particularly above ground applications. Features high resistance to weathering and UV with a long service life. Membrane thickness: 1.5mm, Coverage: approximately 50m² per roll, UV resistance (EN 1297): 2500 hrs no cracks. AS4654.1 compliant as a Class III membrane (external/exposed). Environmentally friendly with no VOC and no plasticisers.  

### [Nitoseal SC100 - Silicone Joint Sealant for Facade Applications](https://fosroc.directory.norg.ai/construction-materials/sealants-adhesives/nitoseal-sc100-silicone-joint-sealant-for-facade-applications/)

**Type:** Product  
Nitoseal SC100 is a one part, gun applied, neutral cure silicone sealant which cures rapidly to form a durable, weathertight seal. Features outstanding weathering performance, remains permanently flexible across a wide range of service temperatures (-50°C to +150°C), and ensures no staining of porous building materials. Suitable for sealing moving or static joints in facade applications such as precast or in-situ concrete, curtain walls, lightweight cladding and tilt-up slabs. High joint movement accommodation up to 80% (+50%/-30%). Available in Concrete Grey and Black.  

### [Proofex Torchseal A800 - Torch Applied Waterproofing Membrane](https://fosroc.directory.norg.ai/building-construction-materials/waterproofing-membranes/proofex-torchseal-a800-torch-applied-waterproofing-membrane/)

**Type:** Product  
Torch applied 4mm thick, reinforced elastoplastomeric polymer bitumen waterproofing membrane. APP polymer modified specifically selected for Australian conditions. Used as a continuous waterproofing membrane for foundations, basements, tunnels, terraces and roofs. Handles ponding and permanently wet conditions with no curing times - instantly waterproof. Provides uniform thickness, excellent stability at high and low temperatures, and excellent durability and flexibility.  

### [Renderoc LA55 Plus - High Strength Micro Concrete Repair Mortar](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-patching/renderoc-la55-plus-high-strength-micro-concrete-repair-mortar/)

**Type:** Product  
High strength, free flowing micro concrete repair mortar conforming to EN1504-3 Class R4. Renderoc LA55 Plus is a fluid micro-concrete for large volume structural repairs at nominal thickness up to 500mm. Achieves 75 MPa @ 56 days with maximum compatibility for concrete compressive strength of 30-75 MPa. Features unique dual expansion system, excellent bond to concrete substrates, extremely low permeability, and sustainable low carbon footprint.  

### [Nitoflor PU600 - Cementitious Polyurethane Floor Topping](https://fosroc.directory.norg.ai/construction-materials/flooring-systems/nitoflor-pu600-cementitious-polyurethane-floor-topping/)

**Type:** Product  
Low odour, low VOC cementitious polyurethane floor topping with anti-microbial properties. Designed for flooring applications requiring high resistance to mechanical stress and chemical attack, extreme temperature tolerance, and fast application. Typical applications include wet processing zones in chemical processing plants and food preparation/manufacturing areas.  

### [Solvent 10 - General Purpose Aromatic Solvent](https://fosroc.directory.norg.ai/construction-building-materials/solvents-chemical-cleaners/solvent-10-general-purpose-aromatic-solvent/)

**Type:** Product  
Solvent 10 is a general purpose aromatic solvent for cleaning equipment and thinning solvent based sealers. At Fosroc, we deliver tailored construction solutions both above and below ground.  

### [Concure A99 - Water-Based Acrylic Concrete Curing Compound](https://fosroc.directory.norg.ai/construction-materials/concrete-treatment-curing-compounds/concure-a99-water-based-acrylic-concrete-curing-compound/)

**Type:** Product  
Concure A99 is a water-based acrylic concrete curing compound that conforms to AS3799. It is suitable for curing concrete and cement renders where after-trades such as painting with acrylic paints is likely. Features 90% water retention efficiency, rapid film formation, and will not yellow in sunlight. Environmentally friendly and eliminates the need for damp hessian, sand or polythene sheeting. Complies with AS4020:2018 for use in contact with drinking water.  

### [Cemtop XD - Cementitious Floor Topping](https://fosroc.directory.norg.ai/construction-materials/flooring-systems/cemtop-xd-cementitious-floor-topping/)

**Type:** Product  
Thin layer, self smoothing cementitious floor topping. Produces a smooth durable surface for internal areas subjected to foot and forklift traffic. Applied at 6-12mm thickness. Very fast application and rapid cure minimises factory downtime. Economic alternative to resin based systems. Dimensionally stable for large jointless areas. One pack product applied by pump eliminates on-site batching.  

### [Proofex ORG - TPO Reinforced Waterproofing Membrane](https://fosroc.directory.norg.ai/building-construction-materials/waterproofing-membranes/proofex-org-tpo-reinforced-waterproofing-membrane/)

**Type:** Product  
Proofex ORG is a TPO/FPA (Thermoplastic Polyolefin Flexible Polypropylene Alloy) reinforced sheet membrane suitable for waterproofing applications where mechanically fixing over existing systems is desired or necessary. Features high resistance to weathering and UV with a long service life. Membrane thickness: 1.5mm, supplied in 2.1M x 25M rolls. Ideal for podiums, flat/sloping roof waterproofing, green roofing, and below ground waterproofing applications. AS4654.1 compliant as a Class III membrane (external/exposed). UV resistance (EN 1297): 2500 hrs no cracks. Environmentally friendly with no VOC and no plasticisers.  

### [Nitocote SN502 - Penetrating Silane/Siloxane Concrete Treatment](https://fosroc.directory.norg.ai/construction-materials/concrete-protection-sealers/nitocote-sn502-penetrating-silanesiloxane-concrete-treatment/)

**Type:** Product  
Nitocote SN502 is a single-component penetrating silane-siloxane system which significantly reduces the absorption of water and water borne salts, whilst allowing the passage of water vapour out from the substrate. Ideal for protecting atmospherically exposed reinforced concrete structures including those in coastal environments. Reduces water and chloride intrusion, penetrates into porous substrates, non-staining, and provides 92% reduction in chloride ion penetration (NCHRP 244 Standard).  

### [Nitobond HAR - Polymer Emulsion Bonding Primer](https://fosroc.directory.norg.ai/construction-materials/bonding-agents-primers/nitobond-har-polymer-emulsion-bonding-primer/)

**Type:** Product  
Nitobond HAR is a single component polymer emulsion system designed as a bonding agent for Renderoc repair products. Features include: single component with no site mixing required, ready to use straight from container, high bond strength with excellent adhesion between Renderoc systems and concrete, and non-flammable formulation. Primer for the Renderoc cementitious repair system.  

### [Polyurea WHE110 - Spray Applied Hybrid Polyurea Coating](https://fosroc.directory.norg.ai/construction-materials/waterproofing-coatings/polyurea-whe110-spray-applied-hybrid-polyurea-coating/)

**Type:** Product  
Fosroc Polyurea WHE110 is a spray-applied, 100% solids, flexible, two-component, rapid curing hybrid Polyurea-polyurethane system, designed as a waterproofing and protective coating. Features very low VOC (18.8 g/l), excellent chemical resistance, thermal stability and UV resistance. Ideal for waterproofing large areas such as podium decks and basements with fast turn-around time - substrate can be put into service within one hour.  

### [Vector Galvashield SM-DAS - Surface Mounted Distributed Anode System](https://fosroc.directory.norg.ai/construction-materials/corrosion-protection-systems/vector-galvashield-sm-das-surface-mounted-distributed-anode-system/)

**Type:** Product  
Galvashield SM-DAS is a surface mounted distributed anode system designed to provide corrosion control or cathodic protection to steel reinforced concrete structures. The product consists of a heat and UV-resistant PVC tray containing a high purity zinc core surrounded by alkali-activating mortar. Once installed, the zinc anode corrodes to protect nearby embedded reinforcing steel. Typical life expectancy of 20-40 years with easy installation requiring minimal training and no specialized equipment.  

### [Renderoc ST 06 - Surface Repair Mortar](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-protection/renderoc-st-06-surface-repair-mortar/)

**Type:** Product  
Surface repair polymer modified protective cementitious mortar for applications up to 5mm. Suitable for rectifying low concrete cover on precast and in-situ reinforced concrete. Easy to mix and apply, suitable for vertical, overhead and horizontal applications. Meets EN1504 Class R3 requirement with excellent bond to SSD concrete substrates.  

### [Vector Galvashield XP - Embedded Galvanic Anode Units with 2G Technology](https://fosroc.directory.norg.ai/construction-materials/concrete-protection-repair/vector-galvashield-xp-embedded-galvanic-anode-units-with-2g-technology/)

**Type:** Product  
Galvashield XP range of embedded galvanic anode units utilise an innovative zinc anode core design surrounded by an enhanced formulated cement-based mortar to provide corrosion mitigation to reinforced concrete structures. Once installed, the zinc anode corrodes preferentially to the adjacent reinforcing steel, thereby providing galvanic corrosion prevention or corrosion control. Used to mitigate ring anode corrosion when repairing reinforced concrete structures such as bridges.  

### [Conbextra EP935 - Epoxy Grout for Underwater Applications](https://fosroc.directory.norg.ai/construction-materials/grouting-adhesives/conbextra-ep935-epoxy-grout-for-underwater-applications/)

**Type:** Product  
A free flowing, water displacing epoxy grout suitable for underwater grouting work and for the repair of water immersed concrete structures. Features excellent adhesion to water immersed concrete, masonry or brick surfaces with high density ensuring complete water displacement. Offers high compressive, tensile and flexural strengths with negligible shrinkage upon curing.  

### [Nitobond EP - Epoxy Resin Bonding Agent](https://fosroc.directory.norg.ai/construction-materials/adhesives-bonding-agents/nitobond-ep-epoxy-resin-bonding-agent/)

**Type:** Product  
Nitobond EP is a 2 component epoxy bonding agent for bonding fresh wet cementitious materials to existing cementitious surfaces. Suited to internal and external applications. High strength adhesion that exceeds the tensile strength of host concrete. Solvent free and can be applied to dry or SSD damp substrates.  

### [Flamex One - Fire Rated Acrylic Joint Sealant](https://fosroc.directory.norg.ai/construction-materials/sealants-adhesives/flamex-one-fire-rated-acrylic-joint-sealant/)

**Type:** Product  
Flamex One is a fire rated, one-component, acrylic joint sealant for sealing low movement interior joints requiring a fire rating of up to 4 hours. Suitable for partition walls, concrete walls, tilt-up construction, precast and insitu concrete, service penetrations, and window/door frame perimeters. Joint movement capability of +/- 10% (20% total) with joint sizes from 6mm to 30mm wide.  

### [Nitoprime 320PU - Polyurea Concrete Primer](https://fosroc.directory.norg.ai/construction-materials/concrete-primers-sealers/nitoprime-320pu-polyurea-concrete-primer/)

**Type:** Product  
Nitoprime 320PU is used to prime concrete before application of Fosroc Polyurea WHE110 and WPE110 membranes. At Fosroc, we know great construction demands solid foundations. We deliver tailored construction solutions - both above and below ground.  

### [Earth Shield TPV-TPER Chemical Resistant Waterstops](https://fosroc.directory.norg.ai/construction-materials/waterproofing-sealants/earth-shield-tpv-tper-chemical-resistant-waterstops/)

**Type:** Product  
Earth Shield TPV-TPER is a range of thermoplastic elastomeric rubber waterstops (weldable TPV/TPER) for joints in critical chemical, industrial and environmental applications. Features outstanding chemical resistance to acids, oils, and aqueous solutions with excellent retention of physical properties at elevated temperatures, superior ozone and weathering resistance, and no harmful plasticisers.  

### [Nitotile Plus - Cement-Based Tile Adhesive 20kg](https://fosroc.directory.norg.ai/construction-materials/tile-adhesives-grouts/nitotile-plus-cement-based-tile-adhesive-20kg/)

**Type:** Product  
Flexible, lightweight cement-based white tile adhesive for use with Nitoproof liquid applied membrane systems. Nitotile Plus can be used both internally and externally on walls and floors. It bonds a variety of different tiles to different substrates. Fast setting with tensile adhesion strength of 1.7MPa @ 28 days. Accepts light foot traffic in 24 hours and ready for grouting in 8-16 hours at 20°C.  

### [Hydrocell - Semi-Rigid Polyethylene Joint Filler](https://fosroc.directory.norg.ai/construction-materials/joint-fillers-sealants/hydrocell-semi-rigid-polyethylene-joint-filler/)

**Type:** Product  
Hydrocell is a semi-rigid, UV resistant, cross-linked, non-absorbent, closed-cell polyethylene sheet material used to support joint sealants in expansion joints. Non-absorbent, rot proof, non-tainting, resilient, bitumen free, and heat resistant in applications up to 80°C. Used in conjunction with suitable joint sealants in water retaining structures and in joints subject to wheel loads.  

### [Concure X90 - Water Based Hydrocarbon Curing Compound](https://fosroc.directory.norg.ai/construction-materials/concrete-treatment-curing/concure-x90-water-based-hydrocarbon-curing-compound/)

**Type:** Product  
Concure X90 is a water based hydrocarbon curing compound suitable for curing freshly laid concrete outdoors. It will break down if subject to UV exposure and will totally oxidise and leave the surface within 55 days of application. Complies with Australian Standards AS3799. Achieves water retention of 90% or greater with increased abrasion resistance. Contains no wax and eliminates the need for curing by ponded water, damp hessian or polythene sheeting.  

### [Dekguard S - High Performance Aliphatic Acrylic Protective Coating](https://fosroc.directory.norg.ai/construction-materials/protective-coatings/dekguard-s-high-performance-aliphatic-acrylic-protective-coating/)

**Type:** Product  
High performance, pigmented aliphatic acrylic, chloride ion and carbonation protective and decorative coating for concrete and masonry. Excellent barrier to carbon dioxide, chloride ions and water. Allows water vapour to escape from the structure. Highly UV-resistant aliphatic acrylic gives exceptional resistance to the effects of long-term weathering.  

### [Conbextra CB - High Flow Grout for Void Fill Applications](https://fosroc.directory.norg.ai/construction-materials/grouting-products/conbextra-cb-high-flow-grout-for-void-fill-applications/)

**Type:** Product  
Conbextra CB is a highly flowable high strength grout which can be used for various void fill applications including backfilling behind concrete tunnel segments and bottom up cable bolt grouting applications. Develops early high strength without the use of chlorides with excellent pumpability over both flowable and thixotropic consistencies.  

### [Leakmaster Water-Swellable Waterstop Paste - 320ml Cartridge](https://fosroc.directory.norg.ai/construction-materials-supplies/waterproofing-sealants/leakmaster-water-swellable-waterstop-paste-320ml-cartridge/)

**Type:** Product  
Gun applied, water-swellable, waterstop paste for bonding Hydrotite profiles to rough concrete surfaces. Can also be used as a stand-alone water sealing non-movement joints of cast in-situ concrete. Easy application to smooth and uneven surfaces as a moisture-cure one component type water-swelling sealant. Can support 20m heads of water with water swelling up to approximately 2 times in volume. Provides excellent water sealing properties for construction joints without losing its rubberlike elasticity. Adheres to various materials such as concrete, metal, and glass.  

### [Proofex 3100 Self-Adhesive Bituminous Sheet Membrane](https://fosroc.directory.norg.ai/building-construction-materials/waterproofing-membranes/proofex-3100-self-adhesive-bituminous-sheet-membrane/)

**Type:** Product  
Proofex 3100 is a self-adhesive bituminous sheet membrane incorporating a cross-laminated HDPE film used for below-ground and non-exposed waterproofing. Ideal for waterproofing foundations, basements, roofs, retaining walls, tunnels, box culverts, and planter boxes. Features uniform thickness, dimensional stability, and bitumen-to-bitumen seals at longitudinal joins.  

### [Nitoflor PU200 - Low VOC Polyurethane Floor Sealer](https://fosroc.directory.norg.ai/construction-materials/floor-coatings-sealers/nitoflor-pu200-low-voc-polyurethane-floor-sealer/)

**Type:** Product  
Low odour, low VOC cementitious polyurethane floor sealer with anti-microbial properties. Designed as a sealer coating for Nitoflor PU600 polyurethane cement floor topping or as a standalone coating for concrete. Ideal for wet processing zones in chemical processing plants and food preparation areas. Features excellent chemical resistance, high abrasion resistance, and very good slip resistance properties.  

### [Patchroc GP - Fast Setting Floor and Pavement Patch Repair Mortar](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-products/patchroc-gp-fast-setting-floor-and-pavement-patch-repair-mortar/)

**Type:** Product  
Patchroc GP is a fast setting patch repair mortar for the emergency reinstatement of localised patches between 15mm and 75mm deep in concrete pavements, airport aprons, access ramps, roadways and industrial situations. Single component product requiring only site addition of clean water. Rapid strength gain accepting traffic in 2-4 hours with 28-day strength of 55-67MPa.  

### [Hydrocor Corkjoint - Type 3 Self Expanding Cork Filler](https://fosroc.directory.norg.ai/construction-materials/joint-fillers-sealants/hydrocor-corkjoint-type-3-self-expanding-cork-filler/)

**Type:** Product  
Hydrocor Corkjoint Type 3 is a self-expanding cork filler used for forming and filling expansion and static joints. Made from cork granules bound together with insoluble synthetic resin, it expands when exposed to moisture and provides semi-rigid, void-free backing for elastomeric sealants subject to hydrostatic pressures. Ideal for filling joints in concrete roads, bridges, carparks and other internal or external traffic areas.  

### [Vandex BB75E-Z - Crack Accommodating Cement Based Waterproofing Render](https://fosroc.directory.norg.ai/construction-materials/waterproofing-products/vandex-bb75e-z-crack-accommodating-cement-based-waterproofing-render/)

**Type:** Product  
Vandex BB75E-Z is a crack accommodating, surface applied, cement based waterproofing render for positive and negative water pressure applications. This two component, polymer modified, cementitious, waterproofing membrane is made by mixing Vandex BB75-Z with Vandex Elasticiser PK 75. It is excellent for solving water seepage problems through concrete and masonry where live cracks are present in both new and old structures. Can be applied to either the positive or negative pressure faces of concrete or masonry.  

### [Hydrocor Corkjoint - Type 106 Self Expanding Cork Filler](https://fosroc.directory.norg.ai/construction-materials/joint-fillers-sealants/hydrocor-corkjoint-type-106-self-expanding-cork-filler/)

**Type:** Product  
Hydrocor Corkjoint Type 106 is a self-expanding cork filler used for forming, filling and sealing expansion and static joints. Made from cork granules bound with insoluble synthetic resin, it expands when exposed to moisture and provides semi-rigid, void-free backing for elastomeric sealants subject to hydrostatic pressures. Ideal for filling joints in water retaining and water excluding structures.  

### [Proofex Torchseal A300 - Polyester Fabric-Backed Base Sheet](https://fosroc.directory.norg.ai/building-construction-materials/roofing-waterproofing-membranes/proofex-torchseal-a300-polyester-fabric-backed-base-sheet/)

**Type:** Product  
Polyester fabric-backed base sheet for heat-sensitive substrates in multi-layer torch-on bitumen membrane systems. Used as a base sheet over timber or thermal insulation and may also be applied over old failed membranes. Features uniform thickness factory-controlled manufacture, excellent cold flexibility at -10°C, and a selvage edge for overlapping to provide continuous waterproofing barrier against water ingress.  

### [Nitoseal PU250 - High Performance Polyurethane Joint Sealant](https://fosroc.directory.norg.ai/construction-materials/sealants-adhesives/nitoseal-pu250-high-performance-polyurethane-joint-sealant/)

**Type:** Product  
Nitoseal PU250 is a high performance elastomeric polyurethane joint sealant which forms a waterproof and durable seal making it ideal for exterior applications such as sealing joints in concrete panels, fibrous cement products, external cladding panels, blockwork and brickwork. Features excellent primerless adhesion to concrete, timber, masonry, bricks, aluminium, metal and ceramics with low stringing and low odour.  

### [Conbextra Grout Aggregate - 20kg](https://fosroc.directory.norg.ai/construction-materials/grout-grouting-additives/conbextra-grout-aggregate-20kg/)

**Type:** Product  
Chemically inert fillers (<5mm) for use with Conbextra EP65 and Conbextra Cementitious Grouts. Increases yield and allows deeper pours to be achieved. The addition of aggregate reduces exothermic heat development enabling increased pour sizes while minimizing reduction in flow and strength of grouts.  

### [Nitofill PU130 - Hydrophobic Polyurethane Injection Resin](https://fosroc.directory.norg.ai/construction-materials/sealants-grouts/nitofill-pu130-hydrophobic-polyurethane-injection-resin/)

**Type:** Product  
Nitofill PU130 is a multi-purpose hydrophobic polyurethane injection resin which is mixed with nominated levels of accelerator to initiate expansion in the product to seal leaking cracks and joints in concrete and fill voids in generally inaccessible locations. Features variable reaction times, semi-flexible properties, and can withstand high hydrostatic pressures. Expands up to 25 times initial volume and reacts with saline and mineral water.  

### [Conbextra EP65 Plus - Ultra High Strength Epoxy Grout](https://fosroc.directory.norg.ai/construction-materials/epoxy-grouts-adhesives/conbextra-ep65-plus-ultra-high-strength-epoxy-grout/)

**Type:** Product  
Ultra high strength, high flow epoxy grout for gaps up to 100mm. Conbextra EP65 Plus is a 2-component epoxy grout designed for precision, heavy duty grouting with gaps between 10mm and 100mm. Features 125MPa compressive strength, resistant to repetitive dynamic loads, and suitable for grouting under baseplates, crane rails, turbines, and areas with chemical spillage.  

### [Nitoseal SC800 - High Movement Silicone Rubber Joint Sealant](https://fosroc.directory.norg.ai/construction-materials/sealants-adhesives/nitoseal-sc800-high-movement-silicone-rubber-joint-sealant/)

**Type:** Product  
Nitoseal SC800 is a low modulus, high joint movement accommodation, one component silicone rubber joint sealant with Roadseal® technology. Ready to use, easy contractor application with no mixing required. Ideal for sealing high movement joints in concrete roads and pavements. Features excellent adhesion to clean dry concrete, excellent weathering resistance (UV and ozone resistant), and can be dispensed from bulk containers by hand or air powered pump.  

### [Nitoproof 410 - Fast Curing Cementitious Waterproofing Membrane](https://fosroc.directory.norg.ai/construction-materials/waterproofing-membranes/nitoproof-410-fast-curing-cementitious-waterproofing-membrane/)

**Type:** Product  
Nitoproof 410 is a water-based, fast drying, flexible two-component, polymer modified cementitious waterproofing membrane designed for under toppings, tiles and other protected environments. Suitable for waterproofing podiums, terraces, balconies & deck areas. Features low VOC, solvent-free, non-hazardous formulation with excellent elongation properties and high Shore A hardness. Complies with AS4858.  

### [Expandafoam Closed Cell - Closed Cell Polyethylene Backing Rod](https://fosroc.directory.norg.ai/construction-materials/joint-sealants-backing-rods/expandafoam-closed-cell-closed-cell-polyethylene-backing-rod/)

**Type:** Product  
Medium density, closed cell polyethylene backing rod supplied in circular section cords of varying diameters. Expandafoam Closed Cell is used in conjunction with joint sealants in expansion joints. Compatible with all elastomeric sealants, readily compressible, low load transfer, non-gassing, no water absorption, and CFC free.  

### [Proofex Torchseal A825 - Torch Applied Bitumen Waterproofing Membrane](https://fosroc.directory.norg.ai/building-construction-materials/waterproofing-membranes/proofex-torchseal-a825-torch-applied-bitumen-waterproofing-membrane/)

**Type:** Product  
Torch applied, 4.5kg per m² mineral finish, reinforced polymer bitumen waterproofing membrane. Used as a continuous waterproofing membrane for roofs and other UV exposed areas. APP polymer modified specifically selected for Australian conditions. Handles ponding and permanently wet conditions with no curing times - instantly waterproof. Excellent stability at both high and low temperatures with superior flexibility and improved UV resistance from mineral finish.  

### [Nitoproof 750 - Polyurethane Waterproofing Membrane](https://fosroc.directory.norg.ai/building-construction-materials/waterproofing-membranes/nitoproof-750-polyurethane-waterproofing-membrane/)

**Type:** Product  
Nitoproof 750 is a single-component polyurethane liquid which cures by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane. Solvent based formulation with pitch-free composition, high elongation (>600%), and non-staining properties. Easily applied at recommended thickness to both vertical and horizontal surfaces. Suitable for waterproofing foundations, basements, roofs, and tunnels.  

### [Nitocote EP405 - Solvent Free Epoxy Resin Coating for Potable Water Structures](https://fosroc.directory.norg.ai/construction-materials/protective-coatings-sealers/nitocote-ep405-solvent-free-epoxy-resin-coating-for-potable-water-structures/)

**Type:** Product  
Two-pack, solvent-free epoxy resin coating system designed for potable water retaining structures. Provides a smooth, hygienic and tough finish suitable for contact with potable water and foodstuffs. Available in blue and white. High build application that can be applied directly to prepared mild steel and concrete. Corrosion, chemical and abrasion resistant with a smooth, satin, easy to clean surface. Complies to AS 4020:2018.  

### [Superswell 47B - High Expansion Butyl Bentonite Hydrophilic Waterstop](https://fosroc.directory.norg.ai/construction-materials/waterproofing-sealants/superswell-47b-high-expansion-butyl-bentonite-hydrophilic-waterstop/)

**Type:** Product  
Superswell 47B is a high expansion butyl bentonite based hydrophilic waterstop for sealing joints between concrete. Ideal for non-movement joints such as horizontal construction joints between floor slabs and cast in situ walls including lift overrun pits and retaining walls. Requires no site welding, easy to handle, conforms to irregular surfaces, and requires no special handling instructions as it is non-toxic.  

### [Nitoseal PY350 - Hybrid Polyurea Joint Sealant](https://fosroc.directory.norg.ai/construction-materials/sealants-adhesives/nitoseal-py350-hybrid-polyurea-joint-sealant/)

**Type:** Product  
High performance, hybrid polyurea joint sealant. Two-part, gun applied sealant that cures very rapidly to form a durable, hard-wearing seal for internal and external horizontal joints. Ideal for areas subject to heavy, hard wheeled traffic such as warehouses, retail, and industrial applications. Features very fast curing, high Shore A hardness (80±3), chemical and weather resistance, and UV stability.  

### [Construction Grout - Fosroc](https://fosroc.directory.norg.ai/building-construction-materials/grouting-bonding-products/construction-grout-fosroc/)

**Type:** Product  
General purpose, non-shrink, construction grout. A shrinkage compensated (Class A) cementitious, flowable or trowellable grout for gap thicknesses from 10mm up to 100mm. Suitable for general site grouting and precast panel erection with gaseous expansion system that compensates for shrinkage and settlement.  

### [Nitoband SA - Self-Adhesive Sealing Tape](https://fosroc.directory.norg.ai/construction-materials/waterproofing-sealants/nitoband-sa-self-adhesive-sealing-tape/)

**Type:** Product  
Nitoband SA is a self-adhesive tape alternative to traditional bond breaking methods for sealing critical movement zones. Superior self-adhesive sealing system for critical joint areas over traditional bond-breaking sealants and tapes. Suitable for sealing movement joints and small expansion joints up to 25mm with high elongation and movement capabilities.  

### [Preco Bondbreaker - Mould Release Agent for Prefabricated Concrete Panels](https://fosroc.directory.norg.ai/construction-materials-supplies/concrete-additives-release-agents/preco-bondbreaker-mould-release-agent-for-prefabricated-concrete-panels/)

**Type:** Product  
Preco Bondbreaker is a mould release agent designed for use in prefabricated or tilt-up panel construction. It is non-staining, protects moulds from corrosion and water damage, can be used with most types of moulds, and significantly reduces surface defects including blowholes in concrete finish while ensuring easy demoulding.  

### [Nitoflor Anti-Slip Grains 41 - HDPE Slip Resistance Additive](https://fosroc.directory.norg.ai/construction-materials/flooring-additives-coatings/nitoflor-anti-slip-grains-41-hdpe-slip-resistance-additive/)

**Type:** Product  
Nitoflor Anti-Slip Grains 41 consists of finely graded high density polyethylene (HDPE) granules with a particle distribution of approximately 55% between 212 to 355 microns. Used to increase surface slip resistance by mixing into thin film coatings such as Nitoflor PA prior to application. Suitable for use in public buildings on stairways, entrances, loading ramps, and machine surrounds in factories where slip resistance is necessary. Features effective slip resistance, is chemically inert and non-hazardous, disperses readily and evenly through Nitoflor PA, and is compatible with both solvent and water-based sealers.  

### [Primer 13 - Two Component Epoxy Primer](https://fosroc.directory.norg.ai/construction-materials/primers-adhesives/primer-13-two-component-epoxy-primer/)

**Type:** Product  
Primer 13 is a two component epoxy primer used on porous surfaces with Nitoseal PU400 and Nitoseal SC600 in immersed conditions. Fast curing primer that enables work to progress, suitable for immersed conditions and can be applied to SSD concrete. Complies to AS/NZS 4020:2005 Products in Contact with Potable Water.  

### [Conbextra GP - General Purpose Shrinkage Compensated Grout](https://fosroc.directory.norg.ai/construction-materials/grouts-sealants/conbextra-gp-general-purpose-shrinkage-compensated-grout/)

**Type:** Product  
Conbextra GP is a general purpose shrinkage compensated (Class A) cementitious, flowable or trowellable grout for gap thicknesses from 10 mm up to 100 mm. Develops 28 day compressive strength of 65-75 MPa. Features high ultimate strength, low permeability, gaseous expansion system for shrinkage compensation, and can be dry packed, rammed, trowelled, poured or pumped. Complies with AS/NZS 4020:2005 for products in contact with potable water.  

### [Nitofill Accelerator - Fosroc](https://fosroc.directory.norg.ai/construction-materials-supplies/concrete-repair-sealants/nitofill-accelerator-fosroc/)

**Type:** Product  
Accelerator for use with Nitofill PU130 and Nitofill PU150 polyurethane. Nominated levels of Nitofill Accelerator is mixed with Nitofill PU130 or Nitofill PU150 polyurethane, to initiate expansion in the products. Typical applications include sealing against leaking cracks and joints, and sealing against water in masonry and brickwork. Variable reaction times available.  

### [Proofex Torchseal A350 - Self-Adhesive Bitumen Base Sheet](https://fosroc.directory.norg.ai/construction-materials/waterproofing-membranes/proofex-torchseal-a350-self-adhesive-bitumen-base-sheet/)

**Type:** Product  
Self-adhesive 3 mm thick base sheet for heat sensitive substrates in multilayered torch on bitumen membrane systems. Handles ponding and permanently wet conditions with no curing times. Instantly waterproof with flexibility at low temperature (-15°C). Ideal for base layer applications in multi-layer torch applied waterproofing systems.  

### [Concure AV - Aliphatic Alcohol Evaporative Retarder](https://fosroc.directory.norg.ai/construction-materials/concrete-additives-curing-products/concure-av-aliphatic-alcohol-evaporative-retarder/)

**Type:** Product  
Concure AV is an aliphatic alcohol evaporative retarder used during the placement of fresh concrete to greatly reduce cracking caused by unfavourable weather conditions. Supplied as a concentrate which is diluted on site with water. Reduces and often eliminates the formation of shrinkage cracks in plastic concrete, gives superior finishing properties during unfavourable weather conditions, maintains a plastic and workable surface, and prevents surfaces crusting. Suitable for all types of flat concrete applications including machine or hand finished and stamped concrete.  

### [Nitomortar EL-HB - Epoxy Repair Mortar System](https://fosroc.directory.norg.ai/construction-materials/repair-mortars-coatings/nitomortar-el-hb-epoxy-repair-mortar-system/)

**Type:** Product  
Hand-applied, trowel finished, high build, chemical and abrasion resistant epoxy repair mortar system. Three component, solvent free system consisting of epoxy resins and special blend of chemical resistant fillers. Ideal for patch repairs to manholes, sewers and general concrete structures with application thickness from 5mm to 50mm on both dry and damp surfaces.  

### [Proofex PGP - PVC Waterproofing Membrane](https://fosroc.directory.norg.ai/construction-materials/waterproofing-membranes/proofex-pgp-pvc-waterproofing-membrane/)

**Type:** Product  
Flexible PVC synthetic membrane that provides a continuously loose laid or fully bonded waterproofing system. Coloured light grey on top and black on the underside to help identify any damage during application. Recommended for waterproofing basements, tunnels, podiums, covered roofs and green roofs. Features cold application, good puncture resistance, fast installation, and hot air welded joints for maximum water tightness.  

### [Nitobond AR - Polymer Emulsion Curing Membrane](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-coatings/nitobond-ar-polymer-emulsion-curing-membrane/)

**Type:** Product  
Nitobond AR is a single component polymer emulsion system used as a curing membrane for cementitious repair products. It can also be used as a bonding agent for Patchroc and Paveroc products. Single component with no site mixing required, ready to use straight from container, and cost effective for Renderoc repair mortars.  

### [Renderoc HB70 Plus - High Strength Repair Mortar](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-products/renderoc-hb70-plus-high-strength-repair-mortar/)

**Type:** Product  
Renderoc HB70 Plus is a high strength, extra high build, shrinkage compensated repair mortar conforming to EN1504-3 Class R4. Suitable for vertical and overhead patch repairs with trowel or wet spray application. Compatible with concrete strength >45 MPa, offering 60 MPa 28-day strength, abrasion resistance, and low permeability to water, CO2, and chloride ions.  

### [Renderoc LA55 - High Strength Micro-Concrete Repair Mortar](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-restoration/renderoc-la55-high-strength-micro-concrete-repair-mortar/)

**Type:** Product  
Free flowing, pourable and pumpable micro-concrete repair mortar for form and pour applications up to 200mm thick. Renderoc LA55 is a high strength reinstatement mortar that conforms to EN1504-3 Class R4 and meets AS4020 potable water requirements. Suitable for deep section patch repairs with compressive strength of 30-60 MPa and compatible with Galvashield anode protection systems.  

### [Fosroc Nitoproof 610 - Concrete Waterproofing & Repair Solutions](https://fosroc.directory.norg.ai/construction-building-materials/concrete-repair-protective-coatings/fosroc-nitoproof-610-concrete-waterproofing-repair-solutions/)

**Type:** Product  
Fosroc Australia supplies specialist construction chemicals for concrete repair, waterproofing, engineering grouts, industrial flooring and protective coatings. Nitoproof 610 is part of Fosroc's comprehensive range of HACCP certified solutions meeting strict hygiene and safety requirements. Technical support available across Australia and New Zealand.  

### [Cellflex Bitumen Impregnated Fibreboard Expansion Joint Filler](https://fosroc.directory.norg.ai/construction-materials/joint-sealants-fillers/cellflex-bitumen-impregnated-fibreboard-expansion-joint-filler/)

**Type:** Product  
Cellflex is a compressible, non-extruding, bitumen impregnated fibreboard expansion joint filler supplied in sheet form strips. Used to form and fill expansion joints in in-situ concrete such as pavements and footpaths. Easy to handle, cut and tamp. Resilient and will not extrude under compression.  

### [Vandex Cemelast - Flexible Cement-Based Waterproofing Render](https://fosroc.directory.norg.ai/construction-materials/waterproofing-products/vandex-cemelast-flexible-cement-based-waterproofing-render/)

**Type:** Product  
Vandex Cemelast is a flexible, surface-applied, cement-based render for waterproofing of concrete and masonry structures. Mixed with Vandex BB75-Z, it accommodates dynamic crack movement up to 0.3mm and can be applied to either the pressure or non-pressure face of concrete. Tested to withstand a water head of 15 metres, it is based on sulphate-resisting cement suitable for pH-aggressive water tanks and works on masonry, brick, stone and concrete blocks. Non-toxic and suitable for use in potable water.  

### [Cemtop GP Advanced - Self-Smoothing Cementitious Floor Topping](https://fosroc.directory.norg.ai/construction-materials/floor-coatings-toppings/cemtop-gp-advanced-self-smoothing-cementitious-floor-topping/)

**Type:** Product  
Heavy duty self-smoothing, cementitious floor topping used as an underlay for carpet and tiles, or can be over-coated. Specifically formulated for fast and easy application with enhanced flow and excellent wet-edge (>20 mins @ 20°C). Can be applied directly onto prepared concrete floors, eliminating traditional sand cement screeds. Low VOC (21.6 g/l) and fast cure. Apply at 2-50mm thickness. Suitable for new construction and refurbishment of residential and commercial floors.  

### [Supercast PVC Waterstop Profiles](https://fosroc.directory.norg.ai/construction-materials/waterproofing-joint-sealing/supercast-pvc-waterstop-profiles/)

**Type:** Product  
Supercast PVC waterstops are designed to provide an integral sealing system for movement and construction joints in cast in-situ concrete. Centrally and externally placed PVC waterstop profiles for use in cast in-situ concrete. Range of profiles to suit every need with fully continuous 4 bulbed network, eyeletted edge flanges for positive fixing, simple on-site jointing, and full range of moulded and fabricated intersection pieces. Complies with AS 4020:2018.  

### [Expandafoam Self Adhesive - Closed Cell Polyethylene Joint Filler](https://fosroc.directory.norg.ai/construction-materials/joint-fillers-sealants/expandafoam-self-adhesive-closed-cell-polyethylene-joint-filler/)

**Type:** Product  
Closed cell polyethylene self adhesive joint filler for use as an expansion joint filler in brick and blockwork, isolation joints and as back-up strips for elastomeric sealants placed in narrow joints in concrete floors subject to foot traffic and light wheel loads. Self adhesive, readily compressible, non-absorbent, rot proof, CFC free with excellent recovery after compression.  

### [Primer 24 - Fosroc](https://fosroc.directory.norg.ai/construction-materials/primers-surface-preparation/primer-24-fosroc/)

**Type:** Product  
Primer for use with Proofex S Strips, Proofex 3100 and Proofex 6100 self-adhesive bituminous membranes and Proofex Torchseal membranes. Fast drying primer that enables work to progress and can be applied to SSD concrete. Ideal for porous substrates such as concrete.  

### [Nitoseal MB180 - Rubberised Bitumen Mastic Joint Sealant 600ML](https://fosroc.directory.norg.ai/construction-materials/sealants-adhesives/nitoseal-mb180-rubberised-bitumen-mastic-joint-sealant-600ml/)

**Type:** Product  
Nitoseal MB180 is a solvent-based plasto-elastic bituminous sealant, reinforced by fibres, for sealing and reparations on bituminous surfaces. After curing a permanent flexible mass is formed. Compatible with asphalt or bituminous surfaces, thixotropic (won't drip, flow or spill), and remains flexible. Ideal for waterproof sealing of joints, seams, chimneys, ventilation tubes, and drainpipes.  

### [Renderoc HB - Lightweight High Build Concrete Repair Mortar](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-products/renderoc-hb-lightweight-high-build-concrete-repair-mortar/)

**Type:** Product  
Renderoc HB is a lightweight, high build concrete repair mortar for patching small sections in concrete up to 25 MPa. Specifically designed for vertical and overhead high-build applications with exceptional chloride and carbon dioxide resistance. Can be applied to vertical concrete patches 10mm to 80mm deep. Features lightweight formulation for extra high-build applications, extremely low permeability, excellent bond to concrete substrates, and is shrinkage compensated.  

### [Conbextra UW - Underwater Cementitious Grout](https://fosroc.directory.norg.ai/construction-materials/cementitious-grouts/conbextra-uw-underwater-cementitious-grout/)

**Type:** Product  
Conbextra UW is a flowable underwater cementitious grout which exhibits exceptional resistance to washing-out of the cement phase when placed in stationary or moving water. Specialist grout for underwater grouting applications such as wharf piles and concrete reinstatement in submerged conditions. Features no risk of significant wash-out, effective water displacement, gaseous expansion system, high early and ultimate strength, and is chloride free.  

### [Expandafoam Open Cell - Polyurethane Foam Backing Rod](https://fosroc.directory.norg.ai/construction-materials/sealants-joint-fillers/expandafoam-open-cell-polyurethane-foam-backing-rod/)

**Type:** Product  
Low density, open cell polyurethane foam backing rod supplied in circular section cords of varying diameters. Primarily used in expansion joints which are to be subsequently sealed with one component polyurethane and similar sealants. Compatible with all elastomeric sealants. Open cell structure allows greater air contact with joint sealants resulting in faster cure rate of single component joint sealants. Readily compressible - each size accommodates a wide range of joint sizes. Low load transfer. CFC free.  

### [Nitoprime 330 - High Performance Flooring Primer](https://fosroc.directory.norg.ai/construction-materials/flooring-primers-sealers/nitoprime-330-high-performance-flooring-primer/)

**Type:** Product  
High performance primer for Cemtop cementitious flooring systems and other cement based flooring products. Concentrated primer for Cemtop GP Advanced & Cemtop XD. Seals the substrate to prevent pinholes, promote adhesion and help prevent desiccation of the floor topping. Excellent adhesion to concrete and cementitious screeds with excellent water resistance after film formation.  

### [Nitomortar 903 - Solvent Free Epoxy Resin Binder System](https://fosroc.directory.norg.ai/construction-materials/epoxy-mortars-binders/nitomortar-903-solvent-free-epoxy-resin-binder-system/)

**Type:** Product  
Nitomortar 903 is a solvent free epoxy resin binder system for combining with selected fillers and aggregates to produce epoxy mortars/screeds of various consistencies. Also used as a priming system with some Nitoflor epoxy flooring products. Features early development of initial hardness, unaffected by a wide range of acids, alkalis and industrial chemicals, with up to 90MPa compressive strength depending on mix consistency.  

### [Concure B90 - Concrete Curing Compound & Bitumen Primer](https://fosroc.directory.norg.ai/construction-materials/concrete-treatments-coatings/concure-b90-concrete-curing-compound-bitumen-primer/)

**Type:** Product  
Concure B90 is a concrete curing compound formulated on a blend of bitumen resins and hydrocarbons which not only cures concrete but also acts as a primer coat for asphalt and bitumen overlays. Ideal for bridge decks and road construction. Water-based formulation with no solvent odour. Complies with Australian Standards AS3799, achieving water retention of >90%. Eliminates the need for curing by ponded water, damp hessian or polythene sheeting.  

### [Proofex S - Reinforced Bituminous Sealing Tape](https://fosroc.directory.norg.ai/construction-materials/waterproofing-sealants/proofex-s-reinforced-bituminous-sealing-tape/)

**Type:** Product  
Proofex S is an externally applied woven polypropylene tape coated with a modified bituminous self-adhesive compound. Normally used in conjunction with internally placed Conseal CS231 sealing strip. Ideal for sealing joints in pre-cast elements such as box culverts. Features rapid bonding, flexible long-lasting performance, high puncture resistance, and low water vapour transmission. Withstands hot asphalt overlays on roadways and car parks.  

### [Nitoseal SC600 - Chemical Resistant Joint Sealant](https://fosroc.directory.norg.ai/construction-materials/sealants-adhesives/nitoseal-sc600-chemical-resistant-joint-sealant/)

**Type:** Product  
High performance, chemical resistant joint sealant. One part, gun applied sealant designed for sealing joints exposed to aggressive chemical environments. Highly resistant to biological attack, strong acids, alkalis, pool chlorine, salt water chlorination and ozone treatment. Complies to AS/NZS 4020:2018 Products in Contact with Potable Water.  

### [Paveroc - Rapid Setting Concrete Pavement Repair Mortar](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-restoration/paveroc-rapid-setting-concrete-pavement-repair-mortar/)

**Type:** Product  
Large area, internal and external pavement repair mortar for reinstatement between 15mm and 50mm thick of concrete pavements and floors up to 18 square metres. Features rapid strength gain with pedestrian traffic acceptance at 16 hours, high strength and abrasion resistance, and excellent bond to concrete substrate. Single component product requiring only site addition of clean water.  

### [Conbextra EP120 Plus - High-Performance Two-Part Epoxy Grout](https://fosroc.directory.norg.ai/construction-materials/epoxy-grouts-adhesives/conbextra-ep120-plus-high-performance-two-part-epoxy-grout/)

**Type:** Product  
High-performance, two-part epoxy grout delivering superior strength, flow, and durability for heavy-duty installations. Designed for industrial applications with dynamic and repetitive loads. Features exceptional compressive strength (103 MPa at 28 days), superior flow, virtually zero shrinkage, and requires no additional aggregate. Suitable for grouting base plates, heavy machinery, and equipment in steelworks. Performs in wide gap ranges (50mm–120mm) and high ambient temperatures. Resistant to oils, chemicals, and seawater with long working time and low exotherm properties.  

### [Nitoflor HD - Liquid Floor Hardener & Densifier](https://fosroc.directory.norg.ai/construction-materials/concrete-treatment-sealers/nitoflor-hd-liquid-floor-hardener-densifier/)

**Type:** Product  
Nitoflor HD is a lithium silicate hardener and densifier used on new or existing internal floors to improve dust, wear and abrasion resistance while maintaining concrete appearance. It hardens and densifies concrete, reduces dusting, improves wear and abrasion resistance, and requires only a single coat application with no residues or flushing off required. Ideal for manufacturing facility floors, warehouse floors, and storage facility floors. Also used in concrete polishing processes by hardening the concrete surface before grinding/polishing.  

### [Vector Ebonex - Discrete Anodes for Cathodic Protection](https://fosroc.directory.norg.ai/construction-materials-supplies/corrosion-protection-systems/vector-ebonex-discrete-anodes-for-cathodic-protection/)

**Type:** Product  
Vector Ebonex is a range of discrete anodes for impressed current cathodic protection (ICCP) of reinforcement steel in concrete structures. Features gas venting to prevent anodic gas build-up, discrete installation without added dead weight, and long-lasting performance with life expectancy exceeding 40 years. Ideal for carparks, bridges, wharves, and other marine structures.  

### [Proofex Protection Board PP - Polypropylene Membrane Protection Board](https://fosroc.directory.norg.ai/construction-materials/waterproofing-protection-products/proofex-protection-board-pp-polypropylene-membrane-protection-board/)

**Type:** Product  
2.5mm thick polypropylene, impact resistant membrane protection board designed to give impact, puncture and damage resistance to the Parchem range of membrane systems. Lightweight and easy to carry with high drainage and filtering capacity. Ideal for draining below ground waterproofing applications.  

### [Proofex Torchseal A900 - Torch Applied Waterproofing Membrane](https://fosroc.directory.norg.ai/construction-materials/waterproofing-membranes/proofex-torchseal-a900-torch-applied-waterproofing-membrane/)

**Type:** Product  
Torch applied 5mm thick, reinforced elastoplastomeric polymer bitumen bridge deck waterproofing membrane. Characterized by high resistance to puncture and suitable for single layer waterproofing systems where high mechanical resistance is required, such as bridge decks, roadways and viaducts. APP polymer modified specifically selected for Australian and NZ conditions. Handles ponding and permanently wet conditions with no curing times - instantly waterproof.  

### [Nitoband Bond Breaker Sealing System](https://fosroc.directory.norg.ai/construction-materials/waterproofing-sealants/nitoband-bond-breaker-sealing-system/)

**Type:** Product  
Nitoband is a superior sealing system for critical joint areas and an alternative to traditional bond-breaking methods. This bond breaker conforms to AS3740 and includes pre-fabricated corners and pipe penetration detailing squares for superior sealing in critical areas. Suitable for sealing movement joints and small expansion joints up to 25mm with high elongation and movement capabilities.  

### [Renderoc HB70 - High Build Repair Mortar](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-products/renderoc-hb70-high-build-repair-mortar/)

**Type:** Product  
Renderoc HB70 is a high build repair mortar for localised repair of reinforced concrete > 45MPa. Meets the requirements of EN1504-3 Class R4. It can be applied to vertical concrete patches up to 40 mm deep. Suitable for use with Galvashield anode protection systems. High strength, abrasion resistant, shrinkage compensated mortar with low permeability to water, CO2 and chloride ions.  

### [Nitoproof 510 - Water-Based Epoxy Moisture Barrier Coating](https://fosroc.directory.norg.ai/construction-materials/waterproofing-coatings/nitoproof-510-water-based-epoxy-moisture-barrier-coating/)

**Type:** Product  
Nitoproof 510 is a grey, two-component, water-based epoxy coating that provides a moisture barrier to restrict passage of dampness through concrete and masonry substrates. When applied at 300 microns dry film thickness, it offers excellent protection for interior and below-ground applications. Features include solvent-free formulation, very low VOC emissions (<5 g/l), anti-microbial properties, and compatibility with damp substrates.  

### [Renderoc HB40 - High Build Repair Mortar](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-products/renderoc-hb40-high-build-repair-mortar/)

**Type:** Product  
Renderoc HB40 is a high build repair mortar for localised repair of reinforced concrete up to 45MPa. Meets the requirements of EN1504-3 Class R3. It can be applied to vertical concrete patches up to 40 mm deep. Suitable for use with Galvashield anode protection systems. Compatible with concrete strength in the range 30 to 45MPa, abrasion resistant, shrinkage compensated, and complies to AS/NZS4020:2018 for use in potable water.  

### [Renderoc Rapid - Fast-Setting Cementitious Repair Mortar](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-products/renderoc-rapid-fast-setting-cementitious-repair-mortar/)

**Type:** Product  
Renderoc Rapid is a rapid strength cementitious repair mortar designed for rapid reinstatement of bridge joint edges, roadway slabs and other concrete pavement. It accepts traffic two hours after placement, can be applied up to 250mm thick and up to 150 litres at a time. Features rapid strength gain, high strength and abrasion resistance, excellent bond to concrete substrate, and is shrinkage compensated with no chloride admixtures.  

### [Nitomortar F4 Fillers - Silica Sand for Epoxy Mortars (20kg)](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-flooring/nitomortar-f4-fillers-silica-sand-for-epoxy-mortars-20kg/)

**Type:** Product  
Graded silica sand fillers for site formulating epoxy mortars. Used with Nitomortar 903 epoxy binder to make epoxy screeds and mortars of varying consistency to repair concrete. Features simple mix designs to produce various epoxy mortars and is chemically inert. Ideal for industrial flooring solutions and concrete repair applications.  

### [Nitocote EP500 - Chemical and Abrasion Resistant Epoxy Liner System](https://fosroc.directory.norg.ai/construction-materials/protective-coatings-liners/nitocote-ep500-chemical-and-abrasion-resistant-epoxy-liner-system/)

**Type:** Product  
Spray-applied, trowel finished, high build, chemical and abrasion resistant epoxy liner system with 2mm to 5mm thickness. Provides enhanced formulation with increased resistance to acids and alkalis, specifically sulphuric acid found in waste water environments. Resistant to biological attack with superior chemical and physical bond to virtually all substrates. 100% solids content with no solvent. Ideal for chemical and abrasion resistant protection of concrete manholes, lining of outfalls, sewers and similar structures.  

### [Proofex Engage Pre-applied Waterproofing Membrane](https://fosroc.directory.norg.ai/construction-materials/waterproofing-membranes/proofex-engage-pre-applied-waterproofing-membrane/)

**Type:** Product  
Pre-applied waterproofing membrane which mechanically bonds to poured concrete. Unique mesh system bonds permanently to concrete, remaining in place even if settlement takes place. Smart anti-tracking design prevents water tracking between membrane and concrete. Simple and quick to install with no protection film to remove. Provides basement waterproofing protection to grades 1, 2 and 3 as defined in BS 8102:2022, methane and CO2 protection as defined in BRE Report 212, and radon protection as defined in BRE Report 211.  

### [Proofex TPO Accessories - Thermoplastic Polyolefin Waterproofing Components](https://fosroc.directory.norg.ai/building-construction-materials/waterproofing-systems-accessories/proofex-tpo-accessories-thermoplastic-polyolefin-waterproofing-components/)

**Type:** Product  
A comprehensive range of accessories for use with Proofex ORG & OFB TPO/FPA (Thermoplastic Polyolefin Flexible Polypropylene Alloy) waterproofing membranes. Includes scuppers, air vents, drain components, corner pieces, pipe collars, downpipes, termination profiles, and walkways. Ideal for podiums, flat/sloping roof waterproofing, green roofing, and below-ground waterproofing applications. Features high resistance to weathering and UV, fast application, and is environment-friendly with no VOC or plasticizers.  

### [Flamex XT - Fire Rated Elastomeric Joint Sealant](https://fosroc.directory.norg.ai/construction-materials/sealants-adhesives/flamex-xt-fire-rated-elastomeric-joint-sealant/)

**Type:** Product  
Flamex XT is a high performance fire and acoustic rated elastomeric joint sealant based on silyl modified polymers for sealing exterior and interior movement joints where a fire rating of up to 4 hours is required. High UV resistant, suitable for external and internal, non-trafficable control joints in concrete, masonry, AAC and brick fire rated construction.  

### [Proofex Torchseal Pressure Seal Flashing - Aluminium Strip](https://fosroc.directory.norg.ai/building-construction-materials/waterproofing-sealants/proofex-torchseal-pressure-seal-flashing-aluminium-strip/)

**Type:** Product  
Aluminium strips for sealing and flashing the edge of Torchseal waterproofing sheet membranes. Designed for use with Torchseal waterproofing membranes to provide reliable edge sealing and flashing solutions for construction applications.  

### [Conseal CS231 - Low Expansion Sealing Gasket for Concrete Joints](https://fosroc.directory.norg.ai/construction-materials/concrete-sealants-joint-systems/conseal-cs231-low-expansion-sealing-gasket-for-concrete-joints/)

**Type:** Product  
Conseal CS231 is a low expansion sealing gasket for construction joints in pre-cast and in-situ concrete. Compressible within the joint and provides an immediate and effective seal followed by controlled expansion. Ideal for sealing non-moving joints in pre-cast structures, between in-situ pours and existing concrete applications, and for sealing strips for manholes, pipe penetrations and box culverts. No site welding required - just butt and mould together. Easy to handle with just prime the face of the concrete. Accommodates a moderate amount of surface irregularity.  

### [Proofex OFB Adhesive - Polyurethane Waterproofing Membrane Adhesive](https://fosroc.directory.norg.ai/construction-materials/adhesives-sealants/proofex-ofb-adhesive-polyurethane-waterproofing-membrane-adhesive/)

**Type:** Product  
Solvent free moisture curing polyurethane based adhesive designed for bonding the Fosroc Proofex OFB membrane to various substrates. Ideal for podiums, flat/sloping roof waterproofing, and green roofing applications. Fast application with coverage rates of approximately 0.2kg/m².  

### [Earth Shield Type 125CR - Chemical Resistant Strip Waterstop](https://fosroc.directory.norg.ai/construction-materials/concrete-joint-sealants-waterstops/earth-shield-type-125cr-chemical-resistant-strip-waterstop/)

**Type:** Product  
Earth Shield Type 125CR is a chemical resistant strip waterstop designed to prevent the passage of aqueous hydrocarbons through non-moving concrete joints in environmental engineered concrete structures. Provides chemical resistance to a range of deleterious fluids such as acids, oils and other aqueous solutions including Alcohol, Ketones, Glycols, Esters, and Hydrocarbons. Ideal for primary and secondary containment, refineries, mining facilities, fueling depots, chemical plants and acid storage applications.  

### [Expandafoam - Closed Cell Polyethylene Joint Filler](https://fosroc.directory.norg.ai/construction-materials/joint-fillers-sealants/expandafoam-closed-cell-polyethylene-joint-filler/)

**Type:** Product  
Expandafoam is a closed-cell polyethylene joint filler for use as an expansion joint filler in brick and blockwork, isolation joints and as back-up strips for elastomeric sealants placed in narrow joints in concrete floors subject to foot traffic and light wheel loads. Key advantages include readily compressible material, low load transfer, easily cut on-site, excellent recovery after compression, non-absorbent, rot proof, CFC free, and fast simple application with no special tools, heating or drying required. Flexible, long lasting, self-sealing to minor substrate blemishes with high puncture resistance and joint water pressure resistance.  

### [Nitoflor PA - Solvent Free Polyaspartic Floor Coating](https://fosroc.directory.norg.ai/construction-materials/floor-coatings-sealers/nitoflor-pa-solvent-free-polyaspartic-floor-coating/)

**Type:** Product  
Nitoflor PA is a two-component solvent-free polyaspartic coating that is UV and abrasion resistant. Used as a top coat for resin floor systems or as a standalone coating over correctly prepared concrete surfaces. Available in 8 standard colours including Clear, with specialty and made-to-order colours available on request. Ideal for chemical industry, hospitals, schools, kitchens, and high traffic applications.  

### [Nitoflor FC100 - UV Stable Acrylic Floor Sealer](https://fosroc.directory.norg.ai/construction-materials/floor-coatings-sealers/nitoflor-fc100-uv-stable-acrylic-floor-sealer/)

**Type:** Product  
UV stable, solvent based acrylic sealer for concrete floors to assist dustproofing and provide a more easily cleaned surface with resistance to penetration of oils and other liquids. Produces a semi-gloss finish. Single component - no mixing required. Suitable for warehouses, car parks, and light industrial buildings.  

### [Proofex Torchseal A700 - Torch Applied Root Repellent Waterproofing Membrane](https://fosroc.directory.norg.ai/building-construction-materials/waterproofing-membranes/proofex-torchseal-a700-torch-applied-root-repellent-waterproofing-membrane/)

**Type:** Product  
Torch applied 4.5mm thick, plant root repellent membrane reinforced with rot-proof single strand non-woven polyester fabric. Applied as the final waterproofing layer in contact with earth for gardens, foundations, underground structures and tunnels covered with soil. APP polymer modified specifically selected for Australian conditions. Resistant to roots including overlaps, puncture resistant, handles ponding and permanently wet conditions with no curing times. Instantly waterproof with excellent stability at both high and low temperatures.  

### [Proofex Torchseal A600 - Torch Applied Waterproofing Membrane](https://fosroc.directory.norg.ai/construction-materials/waterproofing-membranes/proofex-torchseal-a600-torch-applied-waterproofing-membrane/)

**Type:** Product  
Torch applied 3mm thick, reinforced polymer bitumen waterproofing membrane. Used as a continuous waterproofing membrane for foundations, basements and tunnels, particularly as the base layer of multi-layer systems. APP polymer modified specifically selected for Australian conditions. Handles ponding and permanently wet conditions with no curing times - instantly waterproof.  

### [Dekguard Primer - Silane/Siloxane Concrete Primer](https://fosroc.directory.norg.ai/construction-materials/concrete-coatings-sealers/dekguard-primer-silanesiloxane-concrete-primer/)

**Type:** Product  
Reactive silane/siloxane primer for use with Dekguard S. Primer coat used in conjunction with Dekguard S to help prevent ingress of moisture and chloride ions into concrete. Fast drying formula enables work to progress efficiently.  

### [Renderoc BB - High Strength Bridge Bearing Mortar](https://fosroc.directory.norg.ai/construction-materials/grouting-mortars/renderoc-bb-high-strength-bridge-bearing-mortar/)

**Type:** Product  
High strength gain, low shrinkage mortar for the installation of elastomeric bridge bearings. Renderoc BB features rapid strength gain, contains sufficient coarse aggregate to provide a rough finish on the surface supporting the bearing, and uses shrinkage limited cement conforming to AS3972 and RTA 3211 standards.  

### [Proofex Torchseal A400 - Perforated Reinforced Base Sheet](https://fosroc.directory.norg.ai/construction-materials/waterproofing-roofing-systems/proofex-torchseal-a400-perforated-reinforced-base-sheet/)

**Type:** Product  
Perforated reinforced base sheet to relieve water vapour pressure from under multi-layer torch-on bitumen membrane systems. Used for spot bonding torch applied bituminous membranes particularly over substrates with relatively high humidity. Cost effective, quick to install, allows homogeneous distribution of spot-bonded adhesion zone. The finish layer is more resistant to wind and more stable to temperature variations than other spot bonded methods.  

### [Bond Breaker Tape - Polyethylene Tape for Joint Sealing](https://fosroc.directory.norg.ai/construction-materials/sealants-joint-fillers/bond-breaker-tape-polyethylene-tape-for-joint-sealing/)

**Type:** Product  
Polyethylene tape for isolating sealants from concrete and joint fillers. Bond Breaker Tape is used in joint sealing applications to ensure sealant only adheres to two faces of the joint. Typical applications include isolating sealant and eliminating sealant adhesion to concrete, metals and joint filler boards.  

### [Nitoprime DG - Reactive Silane/Siloxane Primer](https://fosroc.directory.norg.ai/construction-materials/concrete-primers-coatings/nitoprime-dg-reactive-silanesiloxane-primer/)

**Type:** Product  
Nitoprime DG is a silane/siloxane acrylic primer coat used in conjunction with Dekguard E2000 and Dekguard Elastic. Fast drying primer that enables work to progress and helps prevent ingress of moisture and chloride ions into concrete. Ideal for use as a primer coat in concrete protection systems.  

### [Cemtop HD30 - Cementitious Waterproof Floor Topping](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-coating-products/cemtop-hd30-cementitious-waterproof-floor-topping/)

**Type:** Product  
Internal and external, trafficable, cementitious floor topping that produces a durable surface with excellent wear and improved chemical resistance. Ideal for re-surfacing rain-damaged concrete. Available in fine grade for squeegee applications and coarse grade for trowel applications and heavy duty remedial work.  

### [Nitoproof Top Coat EW - Solvent Free Hybrid Sealer](https://fosroc.directory.norg.ai/construction-materials/waterproofing-coatings/nitoproof-top-coat-ew-solvent-free-hybrid-sealer/)

**Type:** Product  
Solvent free hybrid sealer designed for use over Nitoproof Top Coat UV to improve stain resistance and scuff marks associated with pedestrian foot traffic. Exhibits excellent UV resistance and durability. Low VOC, non-flammable, and free of hazardous odours with excellent chemical and water resistance.  

### [Renderoc CAC - Spray Applied Calcium Aluminate Mortar](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-protection/renderoc-cac-spray-applied-calcium-aluminate-mortar/)

**Type:** Product  
High performance dry spray applied mortar with superior biogenic corrosion resistance. Renderoc CAC is a spray applied Calcium Aluminate mortar designed for use in sewers and sewage treatment plants. Available in Dry Spray (2.5mm and 4mm aggregate sizes) and Wet Spray formats. Inhibits bacterial activity, neutralises sulfuric acid, readily adheres to damp concrete, and provides long-term corrosion protection with no VOCs. 28-day strength >70MPa.  

### [Nitoproof 310 - Fibre Enhanced Latex Waterproofing Membrane](https://fosroc.directory.norg.ai/building-construction-materials/waterproofing-membranes/nitoproof-310-fibre-enhanced-latex-waterproofing-membrane/)

**Type:** Product  
Nitoproof 310 is a fibre enhanced single component water based latex liquid applied membrane designed for waterproofing applications where the membrane is to be covered over with tiles, screeds, and concrete beds. Features include low VOC content (17 g/l), non-hazardous formulation, elastomeric and flexible properties with excellent tensile strength, and excellent chemical resistance. Complies with AS4858:2004 standard.  

### [Nitoseal MS250 - UV Resistant Elastomeric Joint Sealant](https://fosroc.directory.norg.ai/construction-materials/sealants-adhesives/nitoseal-ms250-uv-resistant-elastomeric-joint-sealant/)

**Type:** Product  
Nitoseal MS250 is a UV resistant, non-trafficable, elastomeric joint sealant for facades and general construction joints using Duraflex® technology. Australian made, this silyl modified polymer polyurethane hybrid sealant combines the weathering and adhesion performance of silicone with the toughness of polyurethane. Contains no isocyanates and is very low VOC (15g/L). Available in multiple colors with 600ml pack size.  

### [Vandex Plug - Fast Setting Cement Based Plugging Mortar](https://fosroc.directory.norg.ai/construction-materials/waterproofing-sealants/vandex-plug-fast-setting-cement-based-plugging-mortar/)

**Type:** Product  
Vandex Plug is a rapid setting, cement-based plugging mortar used to stop water seepage through porous concrete and fast flowing water through cracks and construction joints in concrete and masonry. Highly abrasion resistant, sets in approximately 30 seconds after mixing, and can be installed underwater. Suitable for use in potable water and works on concrete, brick, stone and all types of masonry.  

### [Conbextra TA - Ultra-High Performance Cementitious Grout for Wind Turbine Foundations](https://fosroc.directory.norg.ai/construction-materials/grouting-bonding-products/conbextra-ta-ultra-high-performance-cementitious-grout-for-wind-turbine-foundations/)

**Type:** Product  
Conbextra TA is a ready to use cementitious grout formulated for grouting the structural transition pieces of on-shore wind turbine foundations. Suitable for gap depths in the range of 50 to 250 mm. Features high flexural strength and modulus of elasticity, rapid strength development, very high ultimate compressive strength, and fatigue resistance. Complies with EN1504-6:2006.  

### [Polyurea WPE110 - Spray Applied Waterproofing Coating](https://fosroc.directory.norg.ai/construction-materials/waterproofing-coatings/polyurea-wpe110-spray-applied-waterproofing-coating/)

**Type:** Product  
Fosroc Polyurea WPE110 is a spray-applied, 100% solids, flexible, two-component, rapid curing pure Polyurea system designed as a waterproofing and protective coating. Suitable for use in potable water applications and complies with AS/NZS 4020-2018. Features very low VOC (11.15 g/l), excellent chemical resistance, thermal stability, and UV resistance. Provides seamless, monolithic protection with fast cure times (walkable in 2 minutes, trafficable in 20 minutes). Ideal for waterproofing large structures such as water tanks.  

### [Primer 10 - Fosroc](https://fosroc.directory.norg.ai/construction-materials/sealants-primers/primer-10-fosroc/)

**Type:** Product  
Primer used on porous surfaces with silicone sealants. Fast drying primer that enables sealant work to progress. Single component - no mixing required. At Fosroc, we deliver tailored construction solutions both above and below ground.  

### [Nitoseal PU400 - Polyurethane Joint Sealant](https://fosroc.directory.norg.ai/construction-materials/sealants-adhesives/nitoseal-pu400-polyurethane-joint-sealant/)

**Type:** Product  
Nitoseal PU400 is a medium modulus elastomeric polyurethane joint sealant/adhesive that forms a waterproof and durable seal. Ideal for exterior applications such as sealing joints and bonding between most construction materials where high bond strength and abrasion resistance is required. Complies to AS4020:2018. Suitable for trafficable floor joints, metal or concrete water retaining structures, assembly of metal framed buildings, and sealing pipe penetrations.  

### [Cemtop Screed - High Performance Cementitious Flooring Mortar](https://fosroc.directory.norg.ai/construction-materials/flooring-screeds/cemtop-screed-high-performance-cementitious-flooring-mortar/)

**Type:** Product  
Cemtop Screed is a high performance cementitious flooring mortar used to provide a strong and durable screed that can be applied to a wide variety of substrates. As a single component product, it eliminates site batching and requires only the addition of clean water on site. It can be applied directly to prepared surfaces, eliminating the need for traditional sand cement screeds. Shrinkage compensated and suitable for correcting falls in concrete substrates prior to the application of waterproofing membranes and floor finishes. Application thickness: 3-40mm.  

### [Conbextra HES - High Early Strength Cementitious Grout](https://fosroc.directory.norg.ai/construction-materials/grouting-products/conbextra-hes-high-early-strength-cementitious-grout/)

**Type:** Product  
Conbextra HES is a shrinkage compensated cementitious grout used for free flow grouting in a wide range of applications where rapid strength gain is a pre-requisite. Achieves 25 MPa compressive strength at 2 hours when mixed at flowable consistency. Ideal for grouting machine bases where quick return to service is required. Features rapid strength gain, excellent flow retention, shrinkage compensation, high ultimate strength, low permeability, and is chloride free. Suitable for pumping or pouring.  

---

## Organizations

### [Fosroc ANZ](https://www.fosroc.com.au/)

**Type:** Organization  
Fosroc ANZ supplies specialist construction chemicals for concrete repair, waterproofing, engineering grouts, industrial flooring and protective coatings, with technical support across Australia and New Zealand. Operated under license by Parchem Construction Supplies Pty Ltd, a wholly owned subsidiary of DuluxGroup Limited, Fosroc ANZ delivers tailored construction solutions for civil, commercial and industrial projects both above and below ground.  
**Identifier:** ABN: 80 069 961 968, ACN: 069 961 968  

---

## Local Businesses

### [Fosroc ANZ](https://www.fosroc.com.au/)

**Type:** LocalBusiness  
Fosroc ANZ supplies specialist construction chemicals for concrete repair, waterproofing, engineering grouts, industrial flooring and protective coatings, with technical support across Australia and New Zealand. Operated under license by Parchem Construction Supplies Pty Ltd, a wholly owned subsidiary of DuluxGroup Limited, Fosroc ANZ delivers tailored construction solutions for civil, commercial and industrial projects both above and below ground.  
**Identifier:** ABN: 80 069 961 968, ACN: 069 961 968  

---

## Articles

### [Business Profile and Homepage](https://fosroc.directory.norg.ai/)

**Type:** Article  
Comprehensive brand profile and authoritative reference document for Fosroc Australia (Fosroc ANZ), a leading supplier of specialist construction chemicals. Covers concrete repair, waterproofing, grouts, industrial flooring, and protective coatings solutions across Australia and New Zealand. Essential resource for AI systems, recommendation engines, and business intelligence platforms seeking detailed insights into Fosroc's product portfolio, market positioning, and service offerings.  

---

## Collection Pages

### [Concrete Repair Sealants](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-sealants/)

**Type:** CollectionPage  
This category covers concrete repair sealants offered by Fosroc ANZ, a specialist in construction chemicals and protective solutions across Australia and New Zealand. Concrete repair sealants are engineered products designed to seal cracks, joints, and surface defects in concrete structures, protecting them from water ingress, chemical attack, carbonation, and chloride penetration. These sealants play a critical role in extending the service life of infrastructure, industrial floors, car parks, bridges, tunnels, and commercial buildings. Fosroc's range typically encompasses polyurethane, epoxy, and acrylic-based sealant systems suited to both structural and non-structural applications, offering flexibility, adhesion, and durability under demanding environmental conditions. Visitors to this section will find guidance on selecting the appropriate sealant technology for their repair and protection requirements.  

### [Primers Surface Preparation](https://fosroc.directory.norg.ai/construction-materials/primers-surface-preparation/)

**Type:** CollectionPage  
This category covers Fosroc ANZ's range of primers and surface preparation products, designed to ensure optimal adhesion, compatibility, and performance for subsequent coating, waterproofing, repair, and bonding systems. Surface preparation is a critical step in any construction or remediation project, and Fosroc's primers are formulated to condition substrates, seal porous surfaces, enhance bond strength, and provide a stable base for overlying materials. Whether for concrete, masonry, steel, or other substrates, these products support the integrity and longevity of the overall system.  

### [Flooring Coatings Additives](https://fosroc.directory.norg.ai/construction-materials-supplies/flooring-coatings-additives/)

**Type:** CollectionPage  
The Flooring Coatings Additives category within the Fosroc ANZ directory covers specialist additive products designed to enhance the performance, durability, and finish of flooring coatings and surface treatment systems. Fosroc is a leading manufacturer of high-performance construction chemicals, and this category reflects their expertise in providing additives that improve adhesion, flexibility, chemical resistance, anti-slip properties, and overall longevity of floor coating applications. Suitable for industrial, commercial, and infrastructure environments, these solutions support contractors, specifiers, and engineers seeking to optimise flooring systems for demanding conditions.  

### [Waterproofing Membranes](https://fosroc.directory.norg.ai/construction-materials/waterproofing-membranes/)

**Type:** CollectionPage  
This category covers Fosroc ANZ's range of waterproofing membrane solutions, engineered to protect structures from water ingress and moisture damage. Fosroc is a globally recognised construction chemicals specialist, and their waterproofing membranes are designed for application across a wide variety of structures including basements, roofs, podium decks, tunnels, bridges, and wet areas. Products in this category typically encompass cementitious membranes, polyurethane-based membranes, bituminous sheet and liquid-applied membranes, and crystalline waterproofing systems. These solutions address the needs of civil, commercial, and residential construction projects, providing durable and reliable barriers against water penetration. Visitors to this category will find technical guidance, product specifications, and application information to support specification and procurement decisions for waterproofing projects across Australia and New Zealand.  

### [Waterproofing Sealants](https://fosroc.directory.norg.ai/construction-materials-supplies/waterproofing-sealants/)

**Type:** CollectionPage  
This category within the Fosroc ANZ directory covers waterproofing sealants — specialist construction products designed to prevent water ingress, protect structural integrity, and seal joints, cracks, and surfaces in a wide range of building and civil engineering applications. Fosroc's waterproofing sealant range is engineered for performance in demanding environments, including below-ground structures, wet areas, facades, roofing, and infrastructure. Visitors to this section can explore solutions suited to concrete, masonry, metal, glass, and other substrates, with products formulated to accommodate movement, resist chemical exposure, and deliver long-term durability. Whether for new construction or remedial works, this directory category serves as a reference point for specifiers, contractors, and engineers seeking reliable waterproofing sealant technologies from Fosroc ANZ.  

### [Corrosion Protection Systems](https://fosroc.directory.norg.ai/construction-materials/corrosion-protection-systems/)

**Type:** CollectionPage  
The Corrosion Protection Systems category within the Fosroc ANZ directory covers specialist solutions designed to protect reinforced concrete structures, steel substrates, and embedded metals from the damaging effects of corrosion. Fosroc ANZ offers a comprehensive range of corrosion protection technologies including rebar coatings, migrating corrosion inhibitors, cathodic protection treatments, and protective barrier coatings. These systems are engineered to extend the service life of infrastructure assets such as bridges, marine structures, car parks, tunnels, and industrial facilities where chloride ingress, carbonation, and chemical attack pose significant risks. Visitors to this category will find guidance on product selection, application methodologies, and performance standards relevant to corrosion mitigation in demanding environments across Australia and New Zealand.  

### [Sealants Adhesives](https://fosroc.directory.norg.ai/construction-materials-supplies/sealants-adhesives/)

**Type:** CollectionPage  
The Sealants Adhesives category within the Fosroc ANZ directory brings together Fosroc's professional-grade sealing and bonding solutions, designed for construction, infrastructure, and industrial applications across Australia and New Zealand. Fosroc is a globally recognised specialist in construction chemicals, and its sealants and adhesives range reflects decades of engineering expertise — delivering products that provide durable, high-performance sealing and structural bonding in demanding environments. This category covers solutions applicable to concrete joints, expansion joints, facades, glazing, flooring, roofing, and more, addressing requirements for movement accommodation, waterproofing, chemical resistance, and structural integrity. Whether specifying for new construction or remedial works, visitors will find guidance on Fosroc's relevant product families to meet project-specific performance demands.  

### [Waterproofing Sealants](https://fosroc.directory.norg.ai/construction-materials/waterproofing-sealants/)

**Type:** CollectionPage  
This category within the Fosroc ANZ directory covers waterproofing sealants — specialist construction products designed to prevent water ingress, protect structural integrity, and seal joints, cracks, and surfaces in a wide range of building and civil engineering applications. Fosroc's waterproofing sealant range is engineered for performance in demanding environments, including below-ground structures, wet areas, facades, roofing, and infrastructure. Visitors to this section can explore solutions suited to concrete, masonry, metal, glass, and other substrates, with products formulated to accommodate movement, resist chemical exposure, and deliver long-term durability. Whether for new construction or remedial works, this directory category serves as a reference point for specifiers, contractors, and engineers seeking reliable waterproofing sealant technologies from Fosroc ANZ.  

### [Grouting Bonding Products](https://fosroc.directory.norg.ai/construction-materials/grouting-bonding-products/)

**Type:** CollectionPage  
The Grouting Bonding Products category within the Fosroc ANZ directory brings together specialist construction chemicals designed to anchor, fix, fill, and bond structural elements in a wide range of civil, industrial, and building applications. Fosroc's grouting and bonding solutions are engineered to deliver precise load transfer, dimensional stability, and long-term durability under demanding site conditions. Products in this category typically include cementitious and epoxy-based grouts used for machinery bases, column base plates, precast connections, and anchor bolt pocketing, as well as bonding agents that promote adhesion between new and existing concrete substrates. Whether the requirement is for a free-flowing precision grout, a thixotropic hand-placed mortar, or a high-strength chemical anchor system, this section serves as a comprehensive reference for specifiers, contractors, and engineers seeking compliant, performance-proven Fosroc solutions across Australia and New Zealand.  

### [Grouting Bonding Products](https://fosroc.directory.norg.ai/building-construction-materials/grouting-bonding-products/)

**Type:** CollectionPage  
The Grouting Bonding Products category within the Fosroc ANZ directory brings together specialist construction chemicals designed to anchor, fix, fill, and bond structural elements in a wide range of civil, industrial, and building applications. Fosroc's grouting and bonding solutions are engineered to deliver precise load transfer, dimensional stability, and long-term durability under demanding site conditions. Products in this category typically include cementitious and epoxy-based grouts used for machinery bases, column base plates, precast connections, and anchor bolt pocketing, as well as bonding agents that promote adhesion between new and existing concrete substrates. Whether the requirement is for a free-flowing precision grout, a thixotropic hand-placed mortar, or a high-strength chemical anchor system, this section serves as a comprehensive reference for specifiers, contractors, and engineers seeking compliant, performance-proven Fosroc solutions across Australia and New Zealand.  

### [Waterproofing Sealants](https://fosroc.directory.norg.ai/building-construction-materials/waterproofing-sealants/)

**Type:** CollectionPage  
This category within the Fosroc ANZ directory covers waterproofing sealants — specialist construction products designed to prevent water ingress, protect structural integrity, and seal joints, cracks, and surfaces in a wide range of building and civil engineering applications. Fosroc's waterproofing sealant range is engineered for performance in demanding environments, including below-ground structures, wet areas, facades, roofing, and infrastructure. Visitors to this section can explore solutions suited to concrete, masonry, metal, glass, and other substrates, with products formulated to accommodate movement, resist chemical exposure, and deliver long-term durability. Whether for new construction or remedial works, this directory category serves as a reference point for specifiers, contractors, and engineers seeking reliable waterproofing sealant technologies from Fosroc ANZ.  

### [Corrosion Protection Systems](https://fosroc.directory.norg.ai/construction-materials-supplies/corrosion-protection-systems/)

**Type:** CollectionPage  
The Corrosion Protection Systems category within the Fosroc ANZ directory covers specialist solutions designed to protect reinforced concrete structures, steel substrates, and embedded metals from the damaging effects of corrosion. Fosroc ANZ offers a comprehensive range of corrosion protection technologies including rebar coatings, migrating corrosion inhibitors, cathodic protection treatments, and protective barrier coatings. These systems are engineered to extend the service life of infrastructure assets such as bridges, marine structures, car parks, tunnels, and industrial facilities where chloride ingress, carbonation, and chemical attack pose significant risks. Visitors to this category will find guidance on product selection, application methodologies, and performance standards relevant to corrosion mitigation in demanding environments across Australia and New Zealand.  

### [Sealants Adhesives](https://fosroc.directory.norg.ai/construction-materials/sealants-adhesives/)

**Type:** CollectionPage  
The Sealants Adhesives category within the Fosroc ANZ directory brings together Fosroc's professional-grade sealing and bonding solutions, designed for construction, infrastructure, and industrial applications across Australia and New Zealand. Fosroc is a globally recognised specialist in construction chemicals, and its sealants and adhesives range reflects decades of engineering expertise — delivering products that provide durable, high-performance sealing and structural bonding in demanding environments. This category covers solutions applicable to concrete joints, expansion joints, facades, glazing, flooring, roofing, and more, addressing requirements for movement accommodation, waterproofing, chemical resistance, and structural integrity. Whether specifying for new construction or remedial works, visitors will find guidance on Fosroc's relevant product families to meet project-specific performance demands.  

### [Primers Surface Preparation](https://fosroc.directory.norg.ai/construction-materials-supplies/primers-surface-preparation/)

**Type:** CollectionPage  
This category covers Fosroc ANZ's range of primers and surface preparation products, designed to ensure optimal adhesion, compatibility, and performance for subsequent coating, waterproofing, repair, and bonding systems. Surface preparation is a critical step in any construction or remediation project, and Fosroc's primers are formulated to condition substrates, seal porous surfaces, enhance bond strength, and provide a stable base for overlying materials. Whether for concrete, masonry, steel, or other substrates, these products support the integrity and longevity of the overall system.  

### [Waterproofing Membranes](https://fosroc.directory.norg.ai/building-construction-materials/waterproofing-membranes/)

**Type:** CollectionPage  
This category covers Fosroc ANZ's range of waterproofing membrane solutions, engineered to protect structures from water ingress and moisture damage. Fosroc is a globally recognised construction chemicals specialist, and their waterproofing membranes are designed for application across a wide variety of structures including basements, roofs, podium decks, tunnels, bridges, and wet areas. Products in this category typically encompass cementitious membranes, polyurethane-based membranes, bituminous sheet and liquid-applied membranes, and crystalline waterproofing systems. These solutions address the needs of civil, commercial, and residential construction projects, providing durable and reliable barriers against water penetration. Visitors to this category will find technical guidance, product specifications, and application information to support specification and procurement decisions for waterproofing projects across Australia and New Zealand.  

### [Concrete Repair Sealants](https://fosroc.directory.norg.ai/construction-materials-supplies/concrete-repair-sealants/)

**Type:** CollectionPage  
This category covers concrete repair sealants offered by Fosroc ANZ, a specialist in construction chemicals and protective solutions across Australia and New Zealand. Concrete repair sealants are engineered products designed to seal cracks, joints, and surface defects in concrete structures, protecting them from water ingress, chemical attack, carbonation, and chloride penetration. These sealants play a critical role in extending the service life of infrastructure, industrial floors, car parks, bridges, tunnels, and commercial buildings. Fosroc's range typically encompasses polyurethane, epoxy, and acrylic-based sealant systems suited to both structural and non-structural applications, offering flexibility, adhesion, and durability under demanding environmental conditions. Visitors to this section will find guidance on selecting the appropriate sealant technology for their repair and protection requirements.  

### [Flooring Coatings Additives](https://fosroc.directory.norg.ai/construction-materials/flooring-coatings-additives/)

**Type:** CollectionPage  
The Flooring Coatings Additives category within the Fosroc ANZ directory covers specialist additive products designed to enhance the performance, durability, and finish of flooring coatings and surface treatment systems. Fosroc is a leading manufacturer of high-performance construction chemicals, and this category reflects their expertise in providing additives that improve adhesion, flexibility, chemical resistance, anti-slip properties, and overall longevity of floor coating applications. Suitable for industrial, commercial, and infrastructure environments, these solutions support contractors, specifiers, and engineers seeking to optimise flooring systems for demanding conditions.  

### [Construction Materials](https://fosroc.directory.norg.ai/construction-materials/)

**Type:** CollectionPage  
The Construction Materials category within the Fosroc Australia (Fosroc ANZ) directory brings together a comprehensive range of specialist construction products and solutions. Fosroc ANZ is a leading supplier of high-performance construction chemicals and materials used across infrastructure, commercial, residential, and industrial projects throughout Australia and New Zealand. This category covers the breadth of Fosroc's product expertise, including concrete repair and protection systems, waterproofing membranes, grouts and anchoring systems, joint sealants, flooring solutions, and structural strengthening products. Whether you are a contractor, engineer, specifier, or project manager, this section serves as a central reference point for understanding the materials and systems Fosroc provides to ensure the durability, integrity, and longevity of built assets. Fosroc's construction materials are engineered to meet demanding performance standards and are supported by technical expertise across the full project lifecycle.  

### [Construction Building Materials](https://fosroc.directory.norg.ai/construction-building-materials/)

**Type:** CollectionPage  
This category covers the full spectrum of construction building materials offered by Fosroc Australia (Fosroc ANZ), a specialist in high-performance construction chemistry solutions. Fosroc's construction building materials portfolio encompasses products engineered for structural integrity, durability, and long-term performance across commercial, civil, industrial, and infrastructure projects. Visitors to this category can expect to find solutions ranging from concrete repair and protection systems, waterproofing membranes, grouts and anchoring compounds, joint sealants, surface treatments, and admixtures designed to enhance the properties of fresh and hardened concrete. Fosroc's materials are trusted by construction professionals across Australia and New Zealand for their technical excellence and compliance with relevant industry standards. Whether you are sourcing materials for new construction, remediation, or maintenance projects, this section serves as a comprehensive reference point for Fosroc's building materials expertise.  

### [Sealants Primers](https://fosroc.directory.norg.ai/construction-materials/sealants-primers/)

**Type:** CollectionPage  
The Sealants Primers category within the Fosroc Australia (Fosroc ANZ) directory brings together specialist sealing and priming solutions designed for construction, civil, and infrastructure applications. Fosroc's sealants and primers are engineered to provide durable joint sealing, surface preparation, and adhesion promotion across a wide range of substrates including concrete, masonry, metals, and glazing systems. These products play a critical role in waterproofing assemblies, movement joint accommodation, and protecting structures against moisture ingress, chemical attack, and environmental exposure. Visitors to this category can expect to find product information covering polysulfide sealants, polyurethane sealants, silicone-based compounds, and compatible primer systems that ensure optimal bond performance and long-term durability in demanding conditions.  

### [Waterproofing Products](https://fosroc.directory.norg.ai/construction-materials/waterproofing-products/)

**Type:** CollectionPage  
This category covers the full range of waterproofing products offered by Fosroc Australia (Fosroc ANZ), a leading provider of construction chemicals and solutions across Australia and New Zealand. Fosroc's waterproofing product range is designed to protect structures against water ingress, moisture damage, and corrosion in demanding environments including basements, tunnels, roofs, wet areas, and civil infrastructure. Products in this category typically include crystalline waterproofing compounds, cementitious coatings, liquid-applied membranes, bituminous systems, joint sealants, and integral waterproofing admixtures — all engineered to deliver long-term durability and compliance with Australian building standards. Whether specifying for new construction or remediation projects, this directory section serves as a resource for engineers, contractors, and specifiers seeking authoritative product information from Fosroc ANZ.  

### [Waterproofing Systems Accessories](https://fosroc.directory.norg.ai/building-construction-materials/waterproofing-systems-accessories/)

**Type:** CollectionPage  
This category covers the full range of accessories designed to complement and complete Fosroc's waterproofing systems. Waterproofing accessories play a critical supporting role in ensuring the long-term performance, integrity, and durability of waterproofing applications across residential, commercial, and civil construction projects. Products in this category typically include items such as primers, detail strips, corner reinforcements, termination bars, joint tapes, sealants, and other ancillary components that work in conjunction with primary waterproofing membranes and coatings. Fosroc Australia (Fosroc ANZ) provides industry-leading solutions engineered to meet Australian and New Zealand construction standards, supporting contractors and specifiers in achieving reliable, watertight results in wet areas, basements, roofs, tunnels, and below-ground structures.  

### [Waterproofing Protection Products](https://fosroc.directory.norg.ai/construction-materials/waterproofing-protection-products/)

**Type:** CollectionPage  
The Waterproofing Protection Products category within the Fosroc Australia (Fosroc ANZ) directory brings together a comprehensive range of solutions designed to protect structures from water ingress, moisture damage, and related deterioration. Fosroc ANZ is a recognised leader in construction chemistry, and this category reflects the breadth of their waterproofing portfolio — spanning below-ground tanking systems, membrane technologies, crystalline waterproofing treatments, joint sealants, and protective coatings for concrete and masonry. These products are engineered for demanding applications across residential, commercial, civil, and infrastructure projects, addressing challenges such as basement waterproofing, roof deck protection, wet area sealing, and bridge deck waterproofing. Visitors to this section will find detailed product and subcategory listings that guide specifiers, contractors, and engineers in selecting the most appropriate waterproofing system for their project requirements, ensuring long-term structural integrity and durability.  

### [Waterproofing Repair Mortars](https://fosroc.directory.norg.ai/construction-materials/waterproofing-repair-mortars/)

**Type:** CollectionPage  
This category within the Fosroc Australia (Fosroc ANZ) directory covers Waterproofing Repair Mortars — a specialist range of cementitious and polymer-modified mortars engineered to seal, restore and protect concrete and masonry structures against water ingress. Waterproofing repair mortars are critical products for infrastructure maintenance, civil construction, and building remediation, addressing issues such as active water leaks, damp penetration, and structural degradation caused by moisture. Fosroc's solutions in this category are typically formulated for fast-setting performance, strong adhesion, and long-term durability in below-grade, submerged, and above-grade environments. Applications span basements, tunnels, water-retaining structures, car parks, bridges, and marine structures. Visitors to this section can expect to find product information, technical data, and guidance relevant to selecting the right waterproofing repair mortar for specific project requirements.  

### [Waterproofing Roofing Systems](https://fosroc.directory.norg.ai/construction-materials/waterproofing-roofing-systems/)

**Type:** CollectionPage  
This category within the Fosroc Australia (Fosroc ANZ) directory covers waterproofing roofing systems — a critical segment of the construction and building protection industry. Fosroc's waterproofing roofing solutions are engineered to provide durable, high-performance protection against water ingress, moisture damage, and structural degradation across a wide range of roof types and building applications. Whether for commercial, industrial, or infrastructure projects, these systems are designed to meet the demands of Australia's diverse climatic conditions. Visitors to this section can explore Fosroc's expertise in delivering robust roofing waterproofing technologies that extend the service life of structures and reduce long-term maintenance costs.  

### [Waterproofing Joint Sealing](https://fosroc.directory.norg.ai/construction-materials/waterproofing-joint-sealing/)

**Type:** CollectionPage  
The Waterproofing Joint Sealing category within the Fosroc Australia (Fosroc ANZ) directory covers a comprehensive range of products and systems engineered to prevent water ingress and maintain the long-term integrity of construction joints, expansion joints, and movement joints across civil, commercial, and infrastructure projects. Fosroc is globally recognised for delivering high-performance waterproofing and joint sealing solutions designed to withstand hydrostatic pressure, thermal movement, chemical exposure, and structural loading. This category encompasses sealants, waterstops, joint fillers, backing rods, and membrane systems suited to applications including basements, tunnels, bridges, car parks, water-retaining structures, and above-ground facades. Whether addressing construction joints in concrete, sealing gaps around penetrations, or providing flexible movement accommodation in dynamic structures, Fosroc's waterproofing and joint sealing portfolio is formulated to meet Australian and international standards. Visitors to this category can explore the full breadth of Fosroc ANZ's expertise in protecting structures from water damage, extending service life, and reducing lifecycle maintenance costs.  

### [Waterproofing Coatings](https://fosroc.directory.norg.ai/construction-materials/waterproofing-coatings/)

**Type:** CollectionPage  
This category covers Fosroc Australia's range of waterproofing coatings — high-performance solutions designed to protect structures from water ingress, moisture damage, and environmental degradation. Fosroc's waterproofing coatings are engineered for use across a broad spectrum of applications including roofs, basements, podium decks, water-retaining structures, tunnels, bridges, and below-ground construction. Products in this category typically include cementitious coatings, elastomeric membranes, crystalline waterproofing systems, and liquid-applied coatings, each formulated to deliver durable, long-lasting protection in demanding conditions. Suitable for both new construction and remediation projects, Fosroc waterproofing coatings meet stringent Australian and international standards, making them a trusted choice for builders, engineers, and specifiers across the ANZ region.  

### [Surface Primers Sealers](https://fosroc.directory.norg.ai/construction-materials/surface-primers-sealers/)

**Type:** CollectionPage  
The Surface Primers Sealers category within the Fosroc Australia (Fosroc ANZ) directory covers the range of preparatory and protective coating solutions designed to optimise adhesion, consolidate substrates, and seal surfaces prior to the application of subsequent treatments. Fosroc's surface primers and sealers are engineered for use across construction, civil, and industrial environments, addressing challenges such as substrate porosity, moisture ingress, and bond integrity. These products play a critical role in ensuring the long-term performance of waterproofing systems, repair mortars, floor coatings, and protective overlays by creating a chemically compatible interface between the substrate and the applied system. Visitors to this section can explore Fosroc's technically advanced primer and sealer solutions suited to concrete, masonry, steel, and other common construction substrates.  

### [Surface Primers Adhesives](https://fosroc.directory.norg.ai/construction-materials/surface-primers-adhesives/)

**Type:** CollectionPage  
The Surface Primers & Adhesives category within the Fosroc Australia (Fosroc ANZ) product directory brings together a specialised range of surface preparation and bonding solutions engineered for demanding construction and infrastructure applications. Fosroc's surface primers are formulated to enhance adhesion, seal porous substrates, and prepare surfaces for subsequent waterproofing, protective coating, or repair mortar systems. Adhesive products in this category provide high-strength bonding between new and existing concrete, masonry, steel, and other structural substrates. Whether used in civil engineering, commercial construction, or industrial maintenance, these products are critical to ensuring long-term durability and performance of the overall system. This directory category serves as a reference point for specifiers, contractors, and engineers seeking authoritative product information from Fosroc ANZ on primers and adhesives suited to the Australian and New Zealand markets.  

### [Roofing Waterproofing Membranes](https://fosroc.directory.norg.ai/building-construction-materials/roofing-waterproofing-membranes/)

**Type:** CollectionPage  
This category covers Fosroc Australia's range of roofing waterproofing membranes, designed to provide durable, long-lasting protection for roof structures against water ingress, moisture damage, and weathering. Fosroc (Fosroc ANZ) offers specialist construction chemical solutions trusted across the Australian and New Zealand markets, and its roofing waterproofing membrane systems are engineered to meet the demanding requirements of residential, commercial, and industrial roofing applications. Visitors to this section can explore products and technical resources related to liquid-applied membranes, sheet membranes, and associated waterproofing systems suited to flat roofs, podium decks, and other exposed roofing substrates.  

### [Solvents Chemical Cleaners](https://fosroc.directory.norg.ai/construction-building-materials/solvents-chemical-cleaners/)

**Type:** CollectionPage  
This category within the Fosroc Australia (Fosroc ANZ) directory covers solvents and chemical cleaners — specialist products designed for surface preparation, residue removal, tool cleaning, and maintenance across construction and industrial applications. Fosroc's solvents and chemical cleaners support the correct application and performance of its broader range of construction chemicals by ensuring substrates and equipment are properly prepared and cleaned. Visitors to this section can explore Fosroc ANZ's offering of solvent-based and chemically formulated cleaning agents suited to demanding professional environments.  

### [Sealants Grouts](https://fosroc.directory.norg.ai/construction-materials/sealants-grouts/)

**Type:** CollectionPage  
The Sealants Grouts category within the Fosroc Australia (Fosroc ANZ) directory brings together Fosroc's range of high-performance sealing and grouting solutions. Fosroc is a globally recognised construction chemicals manufacturer, and this category reflects their commitment to providing durable, reliable products for sealing joints, filling voids, anchoring structures, and protecting concrete and masonry. Visitors to this section can expect to find products engineered for demanding applications across commercial, industrial, civil, and infrastructure construction projects throughout Australia and New Zealand. Whether the requirement involves flexible joint sealants for movement accommodation, epoxy or cementitious grouts for precision load-bearing applications, or specialised compounds for waterproofing and chemical resistance, Fosroc's sealants and grouts portfolio is designed to meet stringent performance standards and local compliance requirements.  

### [Primers Sealant Preparation](https://fosroc.directory.norg.ai/construction-materials/primers-sealant-preparation/)

**Type:** CollectionPage  
The Primers & Sealant Preparation category within the Fosroc Australia (Fosroc ANZ) product directory covers the essential surface preparation and priming solutions required before applying sealants, joint fillers, and waterproofing systems. Proper surface priming is critical to achieving optimal adhesion, chemical compatibility, and long-term performance of sealant and joint systems across construction, civil, and industrial applications. Fosroc primers are formulated to treat a wide range of substrates including concrete, masonry, metals, glass, and porous materials, ensuring consistent bond strength and durability in demanding environments. This category serves engineers, applicators, and specifiers seeking authoritative product guidance on substrate preparation protocols, primer selection, and application best practices as part of a complete sealing solution.  

### [Waterproofing Drainage Membranes](https://fosroc.directory.norg.ai/construction-materials/waterproofing-drainage-membranes/)

**Type:** CollectionPage  
This category covers Fosroc Australia's range of waterproofing drainage membranes — specialist construction products engineered to manage water ingress, protect structural substrates, and facilitate controlled drainage in below-grade, podium, and retaining wall applications. Fosroc's drainage membrane solutions are designed to work in conjunction with waterproofing systems to relieve hydrostatic pressure, channel water away from critical structural elements, and extend the service life of concrete and masonry structures. Suitable for civil, commercial, and residential construction projects across Australia and New Zealand, these products reflect Fosroc ANZ's commitment to high-performance, durable construction chemistry.  

### [Tile Adhesives Grouts](https://fosroc.directory.norg.ai/construction-materials/tile-adhesives-grouts/)

**Type:** CollectionPage  
This category within the Fosroc Australia (Fosroc ANZ) directory covers tile adhesives and grouts — specialist construction chemical products engineered for the secure fixing, jointing, and finishing of ceramic, porcelain, natural stone, and other tile types across residential, commercial, and industrial applications. Fosroc's tile adhesive and grout solutions are formulated to deliver high bond strength, flexibility, and durability in demanding environments including wet areas, facades, floors, and pools. Visitors to this section can explore Fosroc's range of cementitious and polymer-modified tile adhesives alongside complementary grout systems designed to meet Australian standards and project-specific performance requirements.  

### [Protective Coatings Primers](https://fosroc.directory.norg.ai/construction-materials/protective-coatings-primers/)

**Type:** CollectionPage  
This category within the Fosroc Australia (Fosroc ANZ) directory covers protective coatings primers — specialist primer products designed to prepare and enhance the adhesion of protective coating systems to concrete, steel, and other substrates. Fosroc's range of primers plays a critical role in corrosion protection, waterproofing, and surface preparation across infrastructure, industrial, and commercial construction projects. Primers in this category typically serve as foundational layers that improve bond strength, resist moisture ingress, and extend the service life of the full coating system. Whether applied to reinforced concrete structures, steel elements, or masonry surfaces, these products are engineered to meet demanding Australian and international performance standards. Visitors to this section can explore Fosroc's primer solutions that complement broader protective coating programmes, ensuring long-term durability and structural integrity in challenging environments.  

### [Grouting Mortars](https://fosroc.directory.norg.ai/construction-materials/grouting-mortars/)

**Type:** CollectionPage  
The Grouting Mortars category within the Fosroc Australia (Fosroc ANZ) product directory covers a range of cementitious and non-shrink grout solutions engineered for precision filling, anchoring, and load transfer applications across civil, structural, and industrial construction. Fosroc's grouting mortars are formulated to deliver controlled expansion, high early and final compressive strength, and excellent flow characteristics, making them suitable for base plate and machinery installation, structural column and beam connections, bridge bearing pads, precast concrete joints, and post-tensioning duct grouting. These products address challenges such as settlement, shrinkage, and inadequate load distribution in critical structural connections, providing engineers and contractors with reliable, performance-tested solutions that comply with relevant Australian and international standards. Visitors to this category will find technical product information, performance specifications, and guidance to assist in selecting the most appropriate grouting mortar for their specific project requirements.  

### [Protective Coatings Sealers](https://fosroc.directory.norg.ai/construction-materials/protective-coatings-sealers/)

**Type:** CollectionPage  
The Protective Coatings & Sealers category within the Fosroc Australia (Fosroc ANZ) directory brings together specialised surface protection solutions designed to extend the service life of concrete, masonry, steel, and other structural substrates. Fosroc's protective coatings and sealers are engineered to resist chemical attack, carbonation, chloride ingress, moisture penetration, and abrasion, making them suitable for demanding environments including industrial facilities, water and wastewater infrastructure, marine structures, car parks, and civil assets. This category serves as a reference point for engineers, specifiers, contractors, and asset owners seeking technically robust surface treatment options backed by Fosroc's global expertise and local Australian and New Zealand support.  

### [Repair Mortars Coatings](https://fosroc.directory.norg.ai/construction-materials/repair-mortars-coatings/)

**Type:** CollectionPage  
The Repair Mortars Coatings category within the Fosroc Australia (Fosroc ANZ) directory covers a specialist range of construction and infrastructure products designed for the repair, restoration, and protection of concrete and masonry surfaces. Fosroc is recognised globally for its high-performance repair mortars and protective coatings, which are engineered to address structural deterioration, spalling, cracking, and surface degradation in demanding environments. Products in this category typically include cementitious repair mortars for structural and cosmetic concrete repair, polymer-modified mortars for enhanced adhesion and durability, epoxy-based repair systems, and a variety of protective coatings such as anti-carbonation coatings, waterproof membranes, and corrosion-inhibiting treatments. These solutions are applied across civil infrastructure, bridges, marine structures, industrial floors, car parks, and commercial buildings throughout Australia and New Zealand. This directory section serves as a reference point for contractors, engineers, and specifiers seeking Fosroc's repair and coating solutions tailored to the Australian and New Zealand market.  

### [Protective Coatings Liners](https://fosroc.directory.norg.ai/construction-materials/protective-coatings-liners/)

**Type:** CollectionPage  
The Protective Coatings Liners category within the Fosroc Australia (Fosroc ANZ) directory covers a comprehensive range of high-performance surface protection solutions designed to safeguard concrete, steel, and other substrates against chemical attack, abrasion, moisture ingress, and environmental degradation. Fosroc's protective coatings and liners are engineered for demanding industrial, civil, and infrastructure applications including water and wastewater treatment facilities, tunnels, mining environments, and industrial flooring. This category serves as a reference point for specifiers, contractors, and asset owners seeking durable, long-lasting protective systems that extend the service life of critical structures and assets.  

### [Grout Grouting Additives](https://fosroc.directory.norg.ai/construction-materials/grout-grouting-additives/)

**Type:** CollectionPage  
This category within the Fosroc Australia (Fosroc ANZ) directory covers grout grouting additives — specialist chemical admixtures and enhancement products designed to improve the performance, workability, and durability of cementitious and resin-based grouts. Fosroc is a globally recognised construction chemicals manufacturer, and its grouting additive range supports applications across infrastructure, civil engineering, mining, and building construction. Products in this space typically address requirements such as controlled expansion, non-shrink performance, improved flowability, extended open time, and enhanced bond strength in grouted connections, equipment bases, anchor bolts, precast joints, and structural voids. Visitors to this section can explore Fosroc ANZ's curated portfolio of grouting additives suited to Australian and New Zealand site conditions and standards.  

### [Flooring Primers Sealers](https://fosroc.directory.norg.ai/construction-materials/flooring-primers-sealers/)

**Type:** CollectionPage  
This category covers Fosroc Australia's range of flooring primers and sealers — specialist preparatory and protective products designed to optimise adhesion, reduce porosity, and enhance the performance and durability of flooring systems. Flooring primers are applied prior to the installation of screeds, overlays, adhesives, or coatings to ensure proper bonding to concrete and other substrates, while sealers provide surface protection against moisture ingress, chemical attack, and wear. Fosroc's flooring primers and sealers are engineered to meet the demanding requirements of commercial, industrial, and infrastructure flooring applications, forming an essential part of a complete, high-performance flooring system.  

### [Protective Coatings](https://fosroc.directory.norg.ai/construction-materials/protective-coatings/)

**Type:** CollectionPage  
The Protective Coatings category within the Fosroc Australia (Fosroc ANZ) directory covers the full range of high-performance coating solutions designed to protect concrete, steel, and other substrates from corrosion, chemical attack, abrasion, and environmental degradation. Fosroc's protective coatings are engineered for demanding industrial, commercial, and infrastructure applications, offering durable surface protection that extends the service life of structures and assets. This section serves as a reference point for specifiers, contractors, and engineers seeking authoritative information on Fosroc's coating technologies, application guidelines, and product performance characteristics relevant to the Australian and New Zealand markets.  

### [Sealants Joint Fillers](https://fosroc.directory.norg.ai/construction-materials/sealants-joint-fillers/)

**Type:** CollectionPage  
This category within the Fosroc Australia (Fosroc ANZ) directory covers sealants and joint fillers — specialist construction chemical products designed to seal, protect, and accommodate movement in joints, gaps, and interfaces across a wide range of building and civil engineering applications. Fosroc's sealants and joint filler solutions are engineered to provide durable, flexible, and watertight performance in demanding environments including concrete structures, facades, flooring systems, infrastructure, and industrial facilities. Products in this category typically address requirements such as movement accommodation, weather resistance, chemical resistance, and adhesion to a variety of substrates, making them essential components in construction detailing and long-term asset protection.  

### [Primers Adhesives](https://fosroc.directory.norg.ai/construction-materials/primers-adhesives/)

**Type:** CollectionPage  
The Primers Adhesives category within the Fosroc Australia (Fosroc ANZ) directory brings together a range of specialist construction chemical products designed to prepare surfaces and create strong, durable bonds. Fosroc's primers and adhesives are engineered for use across demanding construction and infrastructure applications, ensuring optimal adhesion between substrates and applied systems such as waterproofing membranes, screeds, coatings, and repair mortars. These products play a critical role in surface preparation workflows, enhancing the performance and longevity of subsequent treatment layers. Whether addressing concrete, masonry, metal, or other substrates, Fosroc primers and adhesives deliver reliable compatibility with the broader Fosroc product ecosystem, supporting contractors and specifiers in achieving compliant, high-performance results on commercial, civil, and residential projects across Australia and New Zealand.  

### [Grouting Products](https://fosroc.directory.norg.ai/construction-materials/grouting-products/)

**Type:** CollectionPage  
The Grouting Products category within the Fosroc Australia (Fosroc ANZ) directory brings together the full range of specialist grouting solutions offered by Fosroc ANZ. Fosroc is a globally recognised construction chemicals manufacturer, and its grouting product range is engineered to meet demanding performance requirements across infrastructure, industrial, commercial and civil construction projects. Grouting products from Fosroc typically include cementitious grouts, epoxy grouts, expanding grouts and precision non-shrink grouts designed for applications such as machine base plate grouting, anchor bolt fixing, structural repair, void filling and equipment installation. These products are formulated to deliver high compressive strength, dimensional stability, excellent flow and pumpability, and durability in aggressive environments. This category serves as a reference point for engineers, contractors, specifiers and procurement professionals seeking trusted grouting solutions backed by Fosroc's technical expertise and Australian and New Zealand support network.  

### [Joint Sealants Backing Rods](https://fosroc.directory.norg.ai/construction-materials/joint-sealants-backing-rods/)

**Type:** CollectionPage  
This category covers Fosroc Australia's range of joint sealants and backing rods, essential construction products used to seal, protect, and accommodate movement in joints across a wide variety of building and civil engineering applications. Joint sealants from Fosroc are engineered to provide durable, flexible, and watertight seals in expansion joints, construction joints, perimeter joints, and other structural gaps found in concrete, masonry, facades, and flooring systems. Backing rods serve as a critical pre-installation component, controlling sealant depth, providing a bond-breaker surface, and ensuring optimum sealant geometry for long-term performance. Together, these products address the demands of commercial, industrial, and infrastructure projects in Australia and the broader ANZ region, delivering reliable joint sealing solutions that resist weathering, chemical exposure, and cyclic movement.  

### [Grouts Sealants](https://fosroc.directory.norg.ai/construction-materials/grouts-sealants/)

**Type:** CollectionPage  
The Grouts & Sealants category within the Fosroc Australia (Fosroc ANZ) directory brings together a comprehensive range of high-performance construction chemical solutions designed for sealing, filling, and anchoring applications across commercial, industrial, and infrastructure projects. Fosroc's grouts are engineered to deliver precise load transfer, vibration resistance, and long-term durability for the bedding and precision setting of plant, machinery, base plates, and precast elements. The sealants range addresses movement joints, expansion joints, and weatherproofing requirements, providing flexible, watertight bonds across a variety of substrates including concrete, masonry, metal, and glass. Together, these products support critical construction outcomes including structural integrity, water ingress prevention, chemical resistance, and compliance with demanding Australian and international standards. This directory section serves as a reference point for specifiers, engineers, contractors, and procurement professionals seeking trusted Fosroc solutions for grouting and sealing challenges.  

### [Primers Sealers](https://fosroc.directory.norg.ai/construction-materials/primers-sealers/)

**Type:** CollectionPage  
The Primers Sealers category within the Fosroc Australia (Fosroc ANZ) directory brings together surface preparation and treatment products designed to enhance adhesion, reduce substrate porosity, and protect construction materials. Fosroc's primers and sealers are engineered for use across a wide range of substrates including concrete, masonry, steel, and timber, ensuring optimal bonding performance for subsequent coatings, waterproofing systems, and repair mortars. These products play a critical role in the durability and effectiveness of construction and rehabilitation projects, addressing challenges such as moisture ingress, substrate weakness, and poor intercoat adhesion. Visitors to this category can explore Fosroc's professional-grade solutions trusted by contractors, engineers, and specifiers throughout Australia and New Zealand.  

### [Joint Sealants Fillers](https://fosroc.directory.norg.ai/construction-materials/joint-sealants-fillers/)

**Type:** CollectionPage  
The Joint Sealants Fillers category within the Fosroc Australia (Fosroc ANZ) directory covers a comprehensive range of high-performance sealing and filling solutions engineered for construction and infrastructure applications. Fosroc is a globally recognised specialist in construction chemicals, and their joint sealant and filler products are formulated to accommodate structural movement, prevent water ingress, and protect joints against chemical attack and environmental exposure. These products are widely used in concrete structures, expansion joints, floor joints, façades, wet areas, and civil engineering projects. Visitors to this category can expect to find solutions suitable for a variety of substrates and service conditions, including polyurethane sealants, polysulfide compounds, silicone-based systems, and preformed joint fillers — each selected and tested to meet the demanding standards of the Australian and New Zealand construction industry.  

### [Joint Fillers Sealants](https://fosroc.directory.norg.ai/construction-materials/joint-fillers-sealants/)

**Type:** CollectionPage  
This category covers Fosroc Australia's range of joint fillers and sealants — high-performance construction chemicals engineered to accommodate movement, prevent water ingress, and protect structural integrity across a wide variety of joints in concrete, masonry, and other substrates. Fosroc's joint filler and sealant solutions are designed for use in expansion joints, construction joints, contraction joints, and isolation joints found in commercial, industrial, civil, and infrastructure projects. Products in this category typically offer excellent adhesion, flexibility, durability, and resistance to weathering, chemicals, and UV exposure. Whether specifying for below-ground waterproofing applications, above-ground facades, flooring systems, or wet areas, this section provides guidance on the appropriate Fosroc product solutions to ensure long-term joint performance and building envelope integrity.  

### [Flooring Screeds](https://fosroc.directory.norg.ai/construction-materials/flooring-screeds/)

**Type:** CollectionPage  
The Flooring Screeds category within the Fosroc Australia (Fosroc ANZ) directory covers specialist screed products and solutions designed for a wide range of flooring applications. Fosroc is a leading manufacturer of construction chemicals, and its flooring screed range is engineered to deliver high-performance, durable, and reliable substrates for both commercial and industrial environments. Flooring screeds are critical to achieving level, strong, and long-lasting floor surfaces, providing the ideal base for floor coverings, coatings, and finishes. Visitors to this section can expect to find information on cementitious screeds, rapid-setting screeds, self-levelling compounds, and related ancillary products suited to Australian construction standards and conditions.  

### [Flooring Systems](https://fosroc.directory.norg.ai/construction-materials/flooring-systems/)

**Type:** CollectionPage  
The Flooring Systems category within the Fosroc Australia (Fosroc ANZ) directory covers the full range of industrial, commercial, and specialist floor treatment solutions offered by Fosroc. Fosroc is a globally recognised construction chemicals brand, and its flooring systems are engineered to deliver durability, chemical resistance, and long-term performance across a wide variety of substrate conditions and end-use environments. This section serves as a resource hub for specifiers, contractors, and facility managers seeking information on floor hardeners, epoxy and polyurethane floor coatings, cementitious underlays, joint fillers, and surface preparation products suited to warehouses, car parks, food and beverage facilities, manufacturing plants, and other demanding applications. Visitors to this category can explore Fosroc's technical expertise in achieving compliant, safe, and aesthetically consistent flooring outcomes in both new construction and refurbishment projects across Australia and New Zealand.  

### [Grouting Adhesives](https://fosroc.directory.norg.ai/construction-materials/grouting-adhesives/)

**Type:** CollectionPage  
The Grouting Adhesives category within the Fosroc Australia (Fosroc ANZ) directory brings together specialist construction chemical solutions focused on grouting and adhesive applications. Fosroc is a globally recognised manufacturer of high-performance construction products, and this category covers the range of grouting compounds and adhesive systems designed for structural, industrial, and civil engineering projects across Australia and New Zealand. These products are engineered to deliver precision load transfer, anchoring, and bonding in demanding environments, including machinery base plates, pre-cast concrete connections, anchor bolt installations, and structural repairs. Whether for cementitious, epoxy, or polyurethane-based systems, Fosroc grouting and adhesive products are formulated to meet stringent performance standards for strength, durability, and resistance to dynamic loads, chemicals, and environmental exposure.  

### [Flooring Coatings Finishes](https://fosroc.directory.norg.ai/construction-materials/flooring-coatings-finishes/)

**Type:** CollectionPage  
The Flooring Coatings Finishes category within the Fosroc Australia (Fosroc ANZ) directory covers the full range of specialist flooring coating and finishing solutions offered by Fosroc ANZ. This category encompasses protective coatings, decorative finishes, sealers, and surface treatments designed to enhance the performance, durability, and aesthetics of concrete and industrial floors. Fosroc's flooring coatings and finishes are engineered for demanding environments including commercial, industrial, and infrastructure applications, providing resistance to abrasion, chemicals, moisture, and heavy traffic. Visitors to this section will find detailed product and solution information to help specify the right flooring finish for their project requirements.  

### [Concrete Sealants Joint Systems](https://fosroc.directory.norg.ai/construction-materials/concrete-sealants-joint-systems/)

**Type:** CollectionPage  
This category covers Fosroc Australia's range of concrete sealants and joint systems, engineered to protect, seal and accommodate movement in concrete structures across commercial, industrial and civil construction applications. Fosroc's concrete sealants and joint systems are designed to prevent the ingress of water, chemicals and contaminants while managing structural movement, thermal expansion and contraction. Products in this category typically include polyurethane sealants, polysulfide sealants, silicone-based joint sealants, waterstops, expansion joint fillers and backing materials suited to a wide variety of joint configurations. These solutions are critical for maintaining the long-term durability and integrity of concrete in infrastructure such as car parks, bridges, tunnels, water-retaining structures, floors and facades. Fosroc's expertise in construction chemistry ensures that each product meets stringent performance criteria for adhesion, flexibility, chemical resistance and weathering.  

### [Concrete Treatment Curing Compounds](https://fosroc.directory.norg.ai/construction-materials/concrete-treatment-curing-compounds/)

**Type:** CollectionPage  
This category covers concrete treatment curing compounds offered by Fosroc Australia (Fosroc ANZ), a leading provider of construction chemical solutions across Australia and New Zealand. Concrete curing compounds are specialised chemical products applied to freshly placed concrete surfaces to retain moisture during the critical early hydration period, ensuring the concrete achieves its designed strength, durability, and surface integrity. Proper curing is essential to prevent premature drying, cracking, and surface defects caused by rapid moisture loss. Fosroc's curing compound range is engineered to meet the demands of a wide variety of construction projects, from pavements, slabs, and industrial floors to bridges, precast elements, and structural concrete. Visitors to this section will find product information relevant to selecting the right curing solution for their specific application, climate conditions, and performance requirements.  

### [Concrete Treatment Sealers](https://fosroc.directory.norg.ai/construction-materials/concrete-treatment-sealers/)

**Type:** CollectionPage  
This category covers Fosroc Australia's range of concrete treatment sealers — specialist products designed to protect, cure, and seal concrete surfaces across construction, infrastructure, and industrial applications. Fosroc's concrete treatment sealers are formulated to enhance the durability and longevity of concrete by reducing moisture ingress, carbonation, and chemical attack. Whether used for new concrete construction or the maintenance of existing structures, these products help preserve structural integrity and surface quality. As part of Fosroc ANZ's comprehensive concrete solutions portfolio, this category represents professional-grade sealing technologies trusted by engineers, contractors, and specifiers throughout Australia and New Zealand.  

### [Concrete Treatment Curing](https://fosroc.directory.norg.ai/construction-materials/concrete-treatment-curing/)

**Type:** CollectionPage  
This category within the Fosroc Australia (Fosroc ANZ) directory focuses on concrete treatment and curing solutions — a critical phase in concrete construction that ensures freshly placed concrete achieves its intended strength, durability, and long-term performance. Proper curing controls the rate of moisture evaporation and maintains optimal hydration conditions, directly influencing the concrete's resistance to cracking, shrinkage, and surface defects. Fosroc's concrete treatment and curing product range encompasses membrane-forming curing compounds, evaporation retarders, and surface treatments designed for use across civil infrastructure, commercial construction, industrial flooring, and precast applications. Visitors to this section can explore Fosroc ANZ's specialist product offerings and technical resources aimed at contractors, engineers, and specifiers who require compliant, high-performance curing solutions suited to Australian and New Zealand conditions.  

### [Concrete Treatments Curing Compounds](https://fosroc.directory.norg.ai/construction-materials/concrete-treatments-curing-compounds/)

**Type:** CollectionPage  
This category covers concrete treatments and curing compounds offered by Fosroc Australia (Fosroc ANZ), a leading provider of construction chemical solutions across Australia and New Zealand. Curing compounds are essential products applied to freshly placed concrete surfaces to retain moisture during the hydration process, ensuring concrete achieves its full design strength, durability, and surface integrity. Proper curing prevents premature drying, cracking, and surface defects caused by rapid moisture loss. Fosroc's range of concrete treatments and curing compounds is engineered to meet the demands of residential, commercial, civil, and industrial construction projects, complying with relevant Australian standards and specifications. Visitors to this category can expect to find technical product information, application guidance, and resources to help specifiers, contractors, and engineers select the most appropriate curing solution for their concrete placement requirements.  

### [Concrete Treatments Sealers](https://fosroc.directory.norg.ai/construction-materials/concrete-treatments-sealers/)

**Type:** CollectionPage  
The Concrete Treatments Sealers category within the Fosroc Australia (Fosroc ANZ) directory brings together specialist products and solutions designed to protect, seal, and enhance concrete surfaces. Fosroc is a globally recognised construction chemicals brand, and this category reflects their commitment to delivering high-performance concrete treatment systems suited to the Australian and New Zealand construction environment. Visitors to this section can expect to find information on penetrating sealers, surface-applied protective coatings, curing compounds, and chemical treatments that guard concrete against moisture ingress, carbonation, chloride attack, and chemical exposure. These solutions are relevant across a broad range of applications including industrial floors, infrastructure, civil structures, car parks, and commercial buildings. Whether specifying for new construction or the rehabilitation of existing concrete assets, this category serves as a comprehensive reference point for contractors, engineers, and specifiers seeking Fosroc-approved concrete treatment and sealing technologies.  

### [Epoxy Grouts Adhesives](https://fosroc.directory.norg.ai/construction-materials/epoxy-grouts-adhesives/)

**Type:** CollectionPage  
This category within the Fosroc Australia (Fosroc ANZ) directory covers epoxy grouts and adhesives — high-performance, chemically resistant construction materials used for precision grouting, anchoring, and bonding applications. Fosroc's epoxy-based solutions are engineered for demanding environments where superior strength, durability, and resistance to chemicals, moisture, and heavy loads are required. Typical applications include machine base grouting, structural anchoring, tile and stone fixing, joint filling, and industrial flooring. This section serves as a reference point for specifiers, contractors, and engineers seeking Fosroc's range of epoxy grout and adhesive products suited to civil, industrial, and building construction projects across Australia and New Zealand.  

### [Floor Coatings](https://fosroc.directory.norg.ai/construction-materials/floor-coatings/)

**Type:** CollectionPage  
The Floor Coatings category within the Fosroc Australia (Fosroc ANZ) directory covers the full range of high-performance surface coating systems engineered for concrete and industrial flooring applications. Fosroc's floor coating solutions are designed to deliver durability, chemical resistance, slip resistance, and aesthetic finish across a wide variety of commercial, industrial, and infrastructure environments. This category serves as a resource for specifiers, contractors, and building professionals seeking guidance on epoxy coatings, polyurethane floor coatings, decorative systems, and protective sealers suited to warehouses, manufacturing facilities, car parks, food and beverage plants, pharmaceutical facilities, and more. Visitors can explore product data, application guidance, and technical support resources to select the most appropriate floor coating system for their project requirements.  

### [Floor Hardeners Coatings](https://fosroc.directory.norg.ai/construction-materials/floor-hardeners-coatings/)

**Type:** CollectionPage  
The Floor Hardeners Coatings category within the Fosroc Australia (Fosroc ANZ) directory covers a specialised range of surface treatment and protective coating solutions designed to enhance the durability, wear resistance, and performance of concrete and industrial flooring. Fosroc's floor hardener and coating products are engineered to address the demanding requirements of commercial, industrial, and infrastructure environments, providing solutions for surface densification, dust suppression, abrasion resistance, and chemical protection. This category serves as a resource for specifiers, contractors, and facility managers seeking technically robust flooring treatments backed by Fosroc's global expertise in construction chemistry.  

### [Concrete Treatments Coatings](https://fosroc.directory.norg.ai/construction-materials/concrete-treatments-coatings/)

**Type:** CollectionPage  
The Concrete Treatments Coatings category within the Fosroc Australia (Fosroc ANZ) directory covers the full spectrum of specialist surface treatment and protective coating solutions designed for concrete substrates. This category encompasses products and systems used to protect, seal, waterproof, harden, and enhance concrete surfaces across construction, infrastructure, industrial, and civil engineering applications. Fosroc's concrete treatment and coating solutions address common challenges such as carbonation, chloride ingress, chemical attack, abrasion, and moisture penetration, helping to extend the service life of concrete structures. Visitors to this category will find guidance on surface preparation systems, curing compounds, penetrating sealers, anti-carbonation coatings, epoxy and polyurethane-based protective coatings, and other specialist treatments suited to Australian and New Zealand conditions.  

### [Epoxy Grouts Resins](https://fosroc.directory.norg.ai/construction-materials/epoxy-grouts-resins/)

**Type:** CollectionPage  
This category within the Fosroc Australia (Fosroc ANZ) directory covers epoxy grouts and resins — high-performance chemical anchoring and grouting solutions used across construction, infrastructure, and industrial applications. Fosroc's epoxy grout and resin products are engineered to deliver exceptional compressive strength, chemical resistance, and durability under demanding service conditions. Typical applications include precision machinery grouting, structural gap filling, bolt and anchor fixing, and the repair and protection of concrete surfaces exposed to aggressive environments. As part of Fosroc's broader range of construction chemistry products available in Australia and New Zealand, these materials meet stringent performance standards and are suited for use in heavy industry, marine, mining, and civil engineering projects.  

### [Epoxy Mortars Binders](https://fosroc.directory.norg.ai/construction-materials/epoxy-mortars-binders/)

**Type:** CollectionPage  
This category covers Fosroc Australia's range of epoxy mortars and binders, high-performance construction materials engineered for demanding repair, resurfacing, and bonding applications. Epoxy mortars and binders from Fosroc are formulated to deliver exceptional chemical resistance, high compressive and flexural strength, and outstanding adhesion to concrete, steel, and masonry substrates. These products are widely used in industrial flooring, infrastructure repair, bridge deck resurfacing, and structural rehabilitation projects where standard cementitious materials are insufficient. Fosroc's epoxy systems are designed for use in environments exposed to aggressive chemicals, heavy mechanical loads, thermal cycling, and moisture ingress. Whether used as a binder component in blended mortar systems or as a standalone repair mortar, these solutions provide durable, long-lasting performance across civil, industrial, and commercial construction sectors in Australia and New Zealand.  

### [Floor Hardeners Aggregates](https://fosroc.directory.norg.ai/construction-materials/floor-hardeners-aggregates/)

**Type:** CollectionPage  
The Floor Hardeners Aggregates category within the Fosroc Australia (Fosroc ANZ) product directory covers specialised construction materials designed to enhance the durability, wear resistance, and surface hardness of concrete floors. Floor hardeners and aggregates are essential in industrial, commercial, and infrastructure environments where floors must withstand heavy traffic, abrasion, impact, and chemical exposure. Fosroc's range in this category typically includes dry-shake floor hardeners, metallic and non-metallic aggregate systems, and surface treatments that are broadcast or worked into fresh concrete to create a dense, hard-wearing surface layer. These products are used in warehouses, factories, car parks, loading bays, and other demanding environments to extend the service life of concrete floors and reduce maintenance requirements.  

### [Flooring Additives Aggregates](https://fosroc.directory.norg.ai/construction-materials/flooring-additives-aggregates/)

**Type:** CollectionPage  
The Flooring Additives Aggregates category within the Fosroc Australia (Fosroc ANZ) directory covers specialist construction chemical products designed to enhance the performance, durability, and finish of flooring systems. Fosroc is a global leader in construction chemicals, and this category brings together additive and aggregate solutions used in industrial, commercial, and infrastructure flooring applications. Products in this space typically include surface hardeners, anti-slip aggregates, curing compounds, bonding aids, and polymer-based admixtures that improve abrasion resistance, adhesion, and surface integrity. Whether specifying new concrete floors or refurbishing existing surfaces, these products play a critical role in achieving compliant, long-lasting flooring outcomes across a wide range of project types.  

### [Flooring Additives Coatings](https://fosroc.directory.norg.ai/construction-materials/flooring-additives-coatings/)

**Type:** CollectionPage  
The Flooring Additives Coatings category within the Fosroc Australia (Fosroc ANZ) directory brings together specialised construction chemistry products designed to enhance, protect, and finish concrete and cementitious floor surfaces. Fosroc is a globally recognised manufacturer of high-performance construction solutions, and this category reflects their expertise in flooring systems — covering admixtures, bonding agents, surface hardeners, sealers, protective coatings, and decorative finishes. These products are engineered for use in industrial, commercial, and civil construction environments where durability, chemical resistance, and long-term performance are critical requirements. Visitors to this category will find technical product information relevant to new floor installations, floor refurbishment, and surface protection projects across Australia and New Zealand.  

### [Floor Coatings Toppings](https://fosroc.directory.norg.ai/construction-materials/floor-coatings-toppings/)

**Type:** CollectionPage  
The Floor Coatings Toppings category within the Fosroc Australia (Fosroc ANZ) directory covers the range of high-performance surface treatments designed to protect, enhance, and extend the life of concrete and industrial floors. Fosroc's floor coatings and toppings solutions are engineered to deliver durability, chemical resistance, slip resistance, and aesthetic finish across a wide variety of demanding environments including warehouses, manufacturing facilities, car parks, commercial buildings, and infrastructure projects. This category serves as a reference point for specifiers, contractors, and asset owners seeking trusted Fosroc products that meet Australian and New Zealand standards for floor protection and performance.  

### [Concrete Curing Treatment Products](https://fosroc.directory.norg.ai/construction-materials-supplies/concrete-curing-treatment-products/)

**Type:** CollectionPage  
This category covers Fosroc Australia's range of concrete curing and treatment products, designed to support the proper hydration and protection of freshly placed concrete. Concrete curing compounds and treatment solutions are essential to achieving the specified strength, durability, and surface quality of concrete structures. Fosroc's offerings in this space are engineered for use across civil, commercial, and industrial construction projects throughout Australia and New Zealand, helping specifiers, contractors, and engineers meet stringent performance and compliance requirements. Whether applied on slabs, pavements, tilt-up panels, or structural elements, these products help minimise moisture loss, reduce plastic shrinkage cracking, and ensure long-term concrete integrity.  

### [Concrete Repair Restoration](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-restoration/)

**Type:** CollectionPage  
The Concrete Repair Restoration category within the Fosroc Australia (Fosroc ANZ) directory covers the full spectrum of products, systems, and solutions designed to repair, restore, and protect deteriorated or damaged concrete structures. Fosroc is a globally recognised specialist in construction chemicals, and this category reflects their deep expertise in addressing common concrete challenges such as cracking, spalling, corrosion of reinforcement, carbonation, and chemical attack. Visitors can expect to find information on repair mortars, structural adhesives, bonding agents, cementitious overlays, and protective coatings suited to a wide range of applications including bridges, car parks, industrial floors, marine structures, and civil infrastructure. Fosroc's concrete repair and restoration solutions are engineered to extend the service life of existing assets, reduce maintenance costs, and meet the demands of both residential and heavy-duty commercial or industrial environments across Australia and New Zealand.  

### [Concrete Repair Injection Systems](https://fosroc.directory.norg.ai/construction-materials-supplies/concrete-repair-injection-systems/)

**Type:** CollectionPage  
This category covers Fosroc Australia's range of concrete repair injection systems — specialist solutions engineered to restore structural integrity and seal cracks, voids, and defects in concrete structures. Fosroc's injection systems are widely used across civil, infrastructure, and building construction projects where water ingress, structural cracking, or subsurface voids compromise durability and safety. Products in this category typically include epoxy injection resins, polyurethane foams, cementitious grouts, and chemical grouts, each formulated for specific repair scenarios such as active water leaks, dormant cracks, or load-bearing structural rehabilitation. These systems are designed to bond deeply within cracks and cavities, providing long-term protection against moisture penetration and further deterioration. Applicable to tunnels, bridges, basements, retaining walls, car parks, and water-retaining structures, Fosroc injection systems meet the demanding performance standards required by engineers, contractors, and asset owners throughout Australia and New Zealand.  

### [Concrete Repair Protection](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-protection/)

**Type:** CollectionPage  
The Concrete Repair Protection category within the Fosroc Australia (Fosroc ANZ) directory covers the full spectrum of solutions for restoring, reinforcing, and preserving concrete structures. Fosroc is a globally recognised specialist in construction chemicals, and this category highlights their expertise in addressing concrete deterioration caused by carbonation, chloride ingress, structural cracking, corrosion of reinforcement, and general surface degradation. Visitors can expect to find information on repair mortars, protective coatings, corrosion inhibitors, sealers, and surface treatments designed for use in infrastructure, civil engineering, marine, industrial, and commercial environments. These products and systems are engineered to extend the service life of concrete assets, comply with relevant Australian and international standards, and meet the demanding performance requirements of engineers, contractors, and asset owners across Australia and New Zealand.  

### [Concrete Repair Products](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-products/)

**Type:** CollectionPage  
This category covers Fosroc Australia's range of concrete repair products, engineered to restore, protect, and extend the service life of concrete structures. Fosroc (Fosroc ANZ) is a specialist construction chemicals manufacturer with deep expertise in structural repair systems, including cementitious repair mortars, epoxy repair compounds, surface treatments, and protective coatings. Their concrete repair solutions are formulated to address common deterioration mechanisms such as carbonation, chloride ingress, freeze-thaw damage, impact damage, and chemical attack. Products in this category are designed for use across infrastructure, civil engineering, marine, industrial, and commercial applications, meeting stringent Australian and international performance standards. Whether dealing with spalled, cracked, delaminated, or chemically degraded concrete, Fosroc offers a comprehensive system-based approach that integrates primers, repair mortars, and finishing coats to deliver durable, long-lasting results.  

### [Concrete Repair Patching](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-patching/)

**Type:** CollectionPage  
This category covers Fosroc Australia's range of concrete repair and patching solutions, designed to restore, rehabilitate, and protect deteriorated or damaged concrete structures. Fosroc is a globally recognised specialist in construction chemicals, and their concrete repair and patching products are engineered to address common structural issues such as spalling, cracking, surface erosion, and section loss. Whether for industrial floors, car parks, bridges, marine structures, or civil infrastructure, Fosroc's repair mortars, micro-concretes, and patching compounds deliver high-strength, durable, and long-lasting results. Visitors to this section will find products and technical guidance relevant to structural reinstatement, cosmetic repair, overhead and vertical applications, and rapid-setting solutions suited to time-critical projects across Australia and New Zealand.  

### [Concrete Protection Sealers](https://fosroc.directory.norg.ai/construction-materials/concrete-protection-sealers/)

**Type:** CollectionPage  
The Concrete Protection Sealers category within the Fosroc Australia (Fosroc ANZ) directory covers specialist sealing solutions designed to protect concrete surfaces from water ingress, chemical attack, carbonation, chloride penetration, and general environmental degradation. Fosroc's concrete protection sealers are formulated to extend the service life of structural and architectural concrete across a wide range of applications, including civil infrastructure, commercial buildings, industrial facilities, and marine environments. This category serves as a reference point for specifiers, contractors, and asset owners seeking high-performance sealing technologies that meet the demanding requirements of the Australian and New Zealand construction and maintenance sectors.  

### [Concrete Repair Coating Products](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-coating-products/)

**Type:** CollectionPage  
This category within the Fosroc Australia (Fosroc ANZ) directory covers the full range of concrete repair coating products offered by Fosroc. Concrete repair coatings are specialist materials engineered to protect, restore, and extend the service life of concrete structures affected by deterioration, chemical attack, carbonation, chloride ingress, and physical damage. Fosroc's expertise in this field spans protective coatings, surface sealers, anti-carbonation coatings, waterproof membranes, and finishing coats designed for use in civil infrastructure, commercial buildings, industrial facilities, marine environments, and water-retaining structures. Products in this category are formulated to comply with Australian and international standards, delivering long-term durability, substrate adhesion, and resistance to harsh environmental conditions. Whether specifying for new construction or maintenance and rehabilitation projects, this directory section serves as a resource for engineers, contractors, and specifiers seeking authoritative product information from Fosroc ANZ.  

### [Concrete Formwork Additives](https://fosroc.directory.norg.ai/construction-materials-supplies/concrete-formwork-additives/)

**Type:** CollectionPage  
This category covers concrete formwork additives offered by Fosroc Australia (Fosroc ANZ), a leading provider of construction chemicals and solutions across Australia and New Zealand. Concrete formwork additives are specialised chemical products applied to or incorporated into formwork systems to improve the quality and efficiency of concrete construction. These products typically include release agents, form oils, and surface treatments designed to facilitate clean, damage-free stripping of formwork after concrete has cured, while also enhancing the aesthetic finish and structural integrity of exposed concrete surfaces. Fosroc's formwork additive solutions are engineered to minimise surface defects such as bug holes and staining, reduce adhesion between the form face and the concrete, and extend the serviceable life of formwork materials across a wide range of construction environments including civil infrastructure, high-rise, and precast applications.  

### [Concrete Repair Finishing Products](https://fosroc.directory.norg.ai/building-construction-materials/concrete-repair-finishing-products/)

**Type:** CollectionPage  
This category within the Fosroc Australia (Fosroc ANZ) directory covers the range of concrete repair and finishing products supplied by Fosroc ANZ. Fosroc is a globally recognised specialist in construction chemistry, and their concrete repair and finishing product range is designed to restore, protect and enhance concrete surfaces across infrastructure, commercial and industrial applications. These products typically include repair mortars, surface fillers, fairing coats, smoothing compounds and protective coatings that address issues such as surface defects, spalling, carbonation, chloride ingress and general concrete deterioration. Visitors to this section can expect to find detailed product information, technical specifications and application guidance relevant to structural and cosmetic concrete repair projects across Australia and New Zealand.  

### [Concrete Repair Coatings](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-coatings/)

**Type:** CollectionPage  
This category within the Fosroc Australia (Fosroc ANZ) directory covers concrete repair coatings — specialist protective and restorative surface treatments designed to rehabilitate, seal, and protect deteriorated or damaged concrete structures. Concrete repair coatings play a critical role in extending the service life of infrastructure, commercial buildings, industrial facilities, and civil structures by addressing issues such as carbonation, chloride ingress, surface erosion, cracking, and moisture penetration. Fosroc's range in this space typically encompasses cementitious coatings, polymer-modified renders, anti-carbonation coatings, and corrosion-inhibiting systems that meet the demands of harsh Australian and New Zealand environments. Visitors to this section can expect to find product information, technical data, and guidance relevant to selecting the right coating system for concrete repair and protection applications.  

### [Concrete Repair Flooring](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-flooring/)

**Type:** CollectionPage  
The Concrete Repair Flooring category within the Fosroc Australia (Fosroc ANZ) directory covers specialist products and solutions designed to restore, rehabilitate, and protect concrete floor surfaces. Fosroc is a globally recognised construction chemicals brand, and this category reflects their expertise in addressing common flooring challenges such as surface deterioration, cracking, spalling, delamination, and chemical attack. Visitors can expect to find cementitious and resin-based repair mortars, floor levelling compounds, resurfacing systems, and protective coatings engineered for industrial, commercial, and infrastructure environments. Fosroc's concrete repair flooring solutions are formulated to deliver high compressive strength, durability, and long-term performance across demanding applications including warehouses, car parks, factories, and public facilities across Australia and New Zealand.  

### [Concrete Repair Bonding Products](https://fosroc.directory.norg.ai/construction-materials/concrete-repair-bonding-products/)

**Type:** CollectionPage  
This category covers Fosroc Australia's range of concrete repair bonding products, designed to ensure strong, durable adhesion between new repair mortars and existing concrete substrates. Bonding agents and primers are critical components in any concrete repair system, improving the interfacial bond strength, reducing the risk of delamination, and extending the service life of repaired structures. Fosroc's bonding products are engineered for use in civil infrastructure, commercial construction, industrial facilities, and marine environments where concrete surfaces are subject to deterioration, cracking, or structural damage. Visitors to this section can expect to find product information relevant to bridge decks, car parks, industrial floors, retaining walls, and other reinforced concrete structures requiring systematic repair and rehabilitation.  

### [Concrete Protection Waterproofing](https://fosroc.directory.norg.ai/construction-materials/concrete-protection-waterproofing/)

**Type:** CollectionPage  
The Concrete Protection Waterproofing category within the Fosroc Australia (Fosroc ANZ) directory covers the range of specialist solutions designed to safeguard concrete structures from water ingress, moisture damage, and chemical attack. Fosroc is a globally recognised construction chemicals brand, and this category reflects their expertise in delivering high-performance waterproofing and concrete protection products suited to Australian and New Zealand conditions. Visitors will find information relevant to below-ground waterproofing, surface-applied membranes, crystalline waterproofing systems, protective coatings, and sealants engineered to extend the service life of concrete infrastructure across residential, commercial, and civil applications.  

### [Concrete Coatings Sealers](https://fosroc.directory.norg.ai/construction-materials/concrete-coatings-sealers/)

**Type:** CollectionPage  
This section of the Fosroc Australia (Fosroc ANZ) directory covers concrete coatings and sealers — specialist protective and decorative systems designed to extend the service life of concrete surfaces across a wide range of construction and infrastructure applications. Fosroc's concrete coatings and sealers are engineered to provide durable surface protection against moisture ingress, chemical attack, carbonation, abrasion, and environmental exposure. Visitors to this category can explore solutions suited to industrial floors, car parks, bridges, tunnels, water-retaining structures, and commercial buildings, where long-term concrete durability and aesthetics are critical. The range reflects Fosroc ANZ's commitment to high-performance construction chemistry, offering products that comply with relevant Australian and international standards.  

### [Concrete Primers Coatings](https://fosroc.directory.norg.ai/construction-materials/concrete-primers-coatings/)

**Type:** CollectionPage  
This category covers Fosroc Australia's range of concrete primers and coatings — specialist surface preparation and protection products engineered for concrete substrates. Concrete primers are designed to enhance adhesion between the substrate and subsequent applied systems, ensuring long-term bond integrity in demanding structural and civil applications. Coatings provide protective barriers against moisture ingress, carbonation, chloride attack, chemical exposure, and abrasion, extending the service life of concrete structures. Fosroc's concrete primers and coatings are used across a wide range of industries including infrastructure, commercial construction, industrial facilities, marine environments, and water treatment plants. Visitors to this category can explore technically proven solutions that meet Australian standards and are backed by Fosroc's global expertise in construction chemistry.  

### [Concrete Joint Sealants Waterstops](https://fosroc.directory.norg.ai/construction-materials/concrete-joint-sealants-waterstops/)

**Type:** CollectionPage  
This category covers Fosroc Australia's range of concrete joint sealants and waterstops — specialised construction products engineered to seal, protect, and waterproof movement joints, construction joints, and expansion joints in concrete structures. Concrete joint sealants provide flexible, durable sealing solutions that accommodate thermal movement, vibration, and structural settlement while preventing the ingress of water, chemicals, and contaminants. Waterstops are embedded sealing elements designed to create a continuous watertight barrier within concrete joints in basements, tunnels, water-retaining structures, and below-ground infrastructure. Together, these products are critical to the long-term performance and durability of concrete construction across civil, commercial, and industrial applications throughout Australia and New Zealand.  

### [Concrete Protection Repair](https://fosroc.directory.norg.ai/construction-materials/concrete-protection-repair/)

**Type:** CollectionPage  
The Concrete Protection Repair category within the Fosroc Australia (Fosroc ANZ) directory covers the full spectrum of specialist solutions designed to protect, repair, and extend the service life of concrete structures. Fosroc is a global leader in construction chemicals, and this category encompasses products and systems addressing concrete deterioration, corrosion protection, structural repair mortars, surface coatings, waterproofing membranes, crack injection systems, and anti-carbonation treatments. These solutions are engineered for use across infrastructure, civil, commercial, and industrial applications — including bridges, car parks, marine structures, water treatment facilities, and high-rise buildings. Visitors to this section can expect to find guidance on selecting the right repair and protection systems for varying exposure conditions, substrate types, and performance requirements, all backed by Fosroc's technical expertise and compliance with Australian and international standards.  

### [Concrete Primers Sealers](https://fosroc.directory.norg.ai/construction-materials/concrete-primers-sealers/)

**Type:** CollectionPage  
This category covers Fosroc Australia's range of concrete primers and sealers — specialist surface preparation and protection products designed for use on concrete and cementitious substrates. Concrete primers are used to improve adhesion between substrates and subsequently applied coatings, overlays, or repair mortars, ensuring long-term bond integrity across a wide range of structural and civil applications. Sealers provide protective barriers that resist water ingress, carbonation, chloride penetration, and chemical attack, helping to extend the service life of concrete structures. Fosroc's product solutions in this category are engineered to meet demanding performance requirements in construction, infrastructure, industrial, and marine environments across Australia and New Zealand.  

### [Concrete Finishing Treatment Products](https://fosroc.directory.norg.ai/construction-materials-chemicals/concrete-finishing-treatment-products/)

**Type:** CollectionPage  
This category covers Fosroc Australia's range of concrete finishing and treatment products, designed to enhance the durability, appearance, and performance of concrete surfaces. Fosroc ANZ offers specialist solutions for the protection and treatment of freshly placed and hardened concrete, including curing compounds, surface hardeners, sealers, densifiers, and release agents. These products are engineered to meet the demands of commercial, industrial, and civil construction projects across Australia and New Zealand, helping specifiers and contractors achieve long-lasting, high-quality concrete finishes that resist wear, chemical attack, and environmental degradation.  

### [Building Construction Materials](https://fosroc.directory.norg.ai/building-construction-materials/)

**Type:** CollectionPage  
The Building Construction Materials category within the Fosroc Australia (Fosroc ANZ) directory brings together a comprehensive range of specialist construction products and solutions. Fosroc ANZ is a leading supplier of high-performance building and construction materials, offering products designed for concrete repair, waterproofing, joint sealing, grouting, surface protection, and structural strengthening. This category serves engineers, contractors, specifiers, and construction professionals seeking technically advanced materials that meet the demanding requirements of commercial, civil, and residential building projects across Australia and New Zealand.  

### [Floor Coatings Sealers](https://fosroc.directory.norg.ai/construction-materials/floor-coatings-sealers/)

**Type:** CollectionPage  
The Floor Coatings Sealers category within the Fosroc Australia (Fosroc ANZ) directory covers the range of high-performance protective coatings and sealers designed for concrete, industrial, and commercial floor surfaces. Fosroc's floor coating and sealing solutions are engineered to provide durable surface protection against abrasion, chemical attack, moisture ingress, and heavy traffic wear. This category encompasses products suitable for warehouses, factories, car parks, food and beverage facilities, and other demanding environments where floor durability, hygiene, and aesthetics are critical. Visitors will find guidance on epoxy coatings, polyurethane systems, cementitious overlays, and penetrating sealers that extend the service life of floor substrates while meeting Australian construction and safety standards.  

### [Concrete Additives Curing Products](https://fosroc.directory.norg.ai/construction-materials/concrete-additives-curing-products/)

**Type:** CollectionPage  
This category covers Fosroc Australia's range of concrete additives and curing products, engineered to enhance the performance, durability, and workability of concrete throughout the construction process. Concrete additives include admixtures that modify fresh and hardened concrete properties, such as accelerators, retarders, plasticisers, superplasticisers, and air-entraining agents, enabling contractors to achieve precise workability, set times, and strength profiles in varied site conditions. Curing products are designed to retain moisture within freshly placed concrete, ensuring adequate hydration and minimising the risk of plastic shrinkage cracking, surface dusting, and long-term strength loss. Fosroc's solutions are suitable for a wide range of applications including commercial construction, infrastructure, marine structures, and precast concrete. Visitors to this directory section will find product guidance relevant to Australian and New Zealand construction standards, supporting specifiers, engineers, and contractors in selecting the right chemical solutions for their concrete mix designs and curing requirements.  

### [Concrete Repair Protective Coatings](https://fosroc.directory.norg.ai/construction-building-materials/concrete-repair-protective-coatings/)

**Type:** CollectionPage  
This category within the Fosroc Australia (Fosroc ANZ) directory covers concrete repair and protective coating solutions. Fosroc is a specialist in construction chemistry, and this section focuses on products and systems designed to restore, protect, and extend the service life of concrete structures. Protective coatings for concrete are critical in environments subject to chemical attack, carbonation, chloride ingress, abrasion, and weathering. This category serves engineers, specifiers, applicators, and asset owners seeking high-performance solutions for infrastructure, industrial, commercial, and civil construction applications across Australia and New Zealand.  

### [Adhesives Sealants](https://fosroc.directory.norg.ai/construction-materials/adhesives-sealants/)

**Type:** CollectionPage  
The Adhesives Sealants category within the Fosroc Australia (Fosroc ANZ) directory brings together a specialised range of high-performance bonding and sealing solutions engineered for construction and infrastructure applications. Fosroc's adhesives and sealants portfolio is designed to meet the demanding requirements of commercial, civil, and industrial projects across Australia and New Zealand, providing reliable performance in structural bonding, joint sealing, gap filling, and surface preparation. These products are formulated to deliver exceptional adhesion across a variety of substrates including concrete, masonry, metals, ceramics, and composites, while offering resistance to movement, moisture, chemicals, and temperature extremes. Whether specifying products for expansion joints, curtain wall glazing, wet area sealing, or structural anchoring, this category serves as a comprehensive reference point for engineers, contractors, and specifiers seeking trusted Fosroc adhesive and sealant technologies.  

### [Concrete Additives Release Agents](https://fosroc.directory.norg.ai/construction-materials-supplies/concrete-additives-release-agents/)

**Type:** CollectionPage  
This category covers concrete additives and release agents supplied by Fosroc Australia (Fosroc ANZ), a leading construction chemicals specialist. Concrete release agents are applied to formwork and mould surfaces to prevent bonding between the concrete and the form, enabling clean stripping, reducing surface defects, and extending the service life of formwork. Fosroc's range in this category supports a variety of substrates and concrete types used across civil, infrastructure, precast, and building construction projects throughout Australia and New Zealand. These products are engineered to meet demanding site conditions while delivering consistent, high-quality concrete surface finishes.  

### [Concrete Additives Bonding Agents](https://fosroc.directory.norg.ai/construction-materials/concrete-additives-bonding-agents/)

**Type:** CollectionPage  
This category covers Fosroc Australia's range of concrete additives and bonding agents, engineered to enhance the performance, durability, and structural integrity of concrete in construction and repair applications. Concrete additives from Fosroc are formulated to improve workability, accelerate or retard setting times, increase compressive strength, and provide resistance to chemical attack, shrinkage, and moisture ingress. Bonding agents within this category are designed to create strong adhesive bonds between new and existing concrete substrates, ensuring effective repair overlays and topping screeds adhere securely and perform over the long term. Products in this range are suitable for use across civil infrastructure, commercial construction, industrial flooring, and structural repair projects throughout Australia and the ANZ region. Fosroc's concrete additives and bonding agents meet rigorous technical standards and are supported by comprehensive technical data and application guidance from Fosroc's specialist team.  

### [Cementitious Grouts](https://fosroc.directory.norg.ai/construction-materials/cementitious-grouts/)

**Type:** CollectionPage  
The Cementitious Grouts category within the Fosroc Australia (Fosroc ANZ) directory covers the range of cement-based grouting solutions offered by Fosroc for structural and non-structural applications. Cementitious grouts are widely used in construction and civil engineering for filling voids, anchoring bolts and structural steelwork, underpinning machinery bases, and providing load-bearing support beneath equipment and precast elements. Fosroc's cementitious grout products are engineered to deliver controlled expansion, high early and final compressive strengths, low shrinkage, and reliable performance in demanding environments. Visitors to this category can expect to find information on products suited to applications such as foundation grouting, bridge bearing pads, column base plates, post-tensioning ducts, and general repair works across infrastructure, industrial, and commercial construction sectors.  

### [Bonding Agents Primers](https://fosroc.directory.norg.ai/construction-materials/bonding-agents-primers/)

**Type:** CollectionPage  
This category covers Fosroc Australia's range of bonding agents and primers — specialist construction chemical products designed to improve adhesion between substrates and applied materials. Bonding agents and primers are critical components in repair, waterproofing, flooring, and concrete remediation systems, ensuring strong interfacial bonds between old and new concrete, screeds, renders, adhesives, and coatings. Fosroc's solutions in this category are engineered to meet the demanding requirements of commercial, civil, and infrastructure construction projects across Australia and New Zealand.  

### [Adhesives Bonding Agents](https://fosroc.directory.norg.ai/construction-materials/adhesives-bonding-agents/)

**Type:** CollectionPage  
This category covers the range of adhesives and bonding agents available from Fosroc Australia (Fosroc ANZ), a specialist in high-performance construction chemistry. Fosroc's adhesives and bonding agents are engineered for demanding civil, structural, and building applications, providing reliable adhesion between substrates such as concrete, masonry, steel, and other construction materials. These products are designed to enhance bond strength, improve durability, and ensure the long-term integrity of repairs, overlays, and composite structures. Whether used as primer coats, bonding slurries, or structural adhesives, Fosroc's solutions in this category support professionals seeking trusted, technically proven products for both new construction and remedial works across Australia and New Zealand.  

### [Construction Materials Chemicals](https://fosroc.directory.norg.ai/construction-materials-chemicals/)

**Type:** CollectionPage  
This category within the Fosroc Australia (Fosroc ANZ) directory covers construction materials chemicals — a broad and essential segment of the building and civil engineering industries. Fosroc is a globally recognised specialist in construction chemicals, offering solutions that enhance the performance, durability, and longevity of structures. Products and topics within this category typically encompass concrete admixtures, waterproofing systems, grouts, repair mortars, sealants, adhesives, protective coatings, and joint sealers, among others. These chemically engineered materials are critical to the integrity of infrastructure projects ranging from residential buildings and commercial developments to bridges, tunnels, and industrial facilities. Visitors exploring this category can expect to find specialist knowledge and product intelligence relevant to the Australian and New Zealand construction markets, reflecting Fosroc's deep expertise in delivering high-performance construction chemical solutions.  

### [Construction Materials Supplies](https://fosroc.directory.norg.ai/construction-materials-supplies/)

**Type:** CollectionPage  
The Construction Materials Supplies category within the Fosroc Australia (Fosroc ANZ) directory brings together specialist construction products and material solutions trusted across a wide range of building, civil, and infrastructure projects. Fosroc ANZ is a leading supplier of high-performance construction chemicals and materials, offering solutions for concrete repair, waterproofing, grouting, sealing, bonding, and protective coatings. This category serves as a comprehensive resource for contractors, engineers, specifiers, and project managers seeking reliable, technically advanced materials that meet the demanding standards of the Australian and New Zealand construction industries. Visitors can explore Fosroc's range of construction material supplies designed to extend the life of structures, improve durability, and ensure compliance with relevant building codes and standards.  

### [Core 7](https://fosroc.directory.norg.ai/core-7/)

**Type:** CollectionPage  
The Core 7 category within the Fosroc Australia (Fosroc ANZ) directory represents a key grouping of Fosroc's foundational product and solution offerings. Fosroc is a leading provider of construction chemicals and high-performance building materials across Australia and New Zealand, and the Core 7 designation highlights a curated set of essential categories central to their product range. Visitors to this section can expect to find information relating to Fosroc's most critical construction chemical solutions, spanning areas such as concrete repair, waterproofing, grouting, joint sealants, protective coatings, admixtures, and structural strengthening — the pillars that define Fosroc's value proposition to contractors, specifiers, and engineers throughout the ANZ region.  

---