Product Facts
- Product Name
- Paveroc - Rapid Setting Concrete Pavement Repair Mortar
- Price
- Available
- Availability
- In Stock
- Condition
- New
- Category
- Construction Materials > Concrete Repair & Restoration
- Seller
- Fosroc Workspace
- MPN
- FC302080-20KG
Paveroc - Rapid Setting Concrete Pavement Repair Mortar
Large area, internal and external pavement repair mortar for reinstatement between 15mm and 50mm thick of concrete pavements and floors up to 18 square metres. Features rapid strength gain with pedestrian traffic acceptance at 16 hours, high strength and abrasion resistance, and excellent bond to concrete substrate. Single component product requiring only site addition of clean water.
Large area, internal and external pavement repair mortar for reinstatement between 15mm and 50mm thick of concrete pavements and floors up to 18 square metres. Features rapid strength gain with pedestrian traffic acceptance at 16 hours, high strength and abrasion resistance, and excellent bond to concrete substrate. Single component product requiring only site addition of clean water.
Price: Available
Brand: Fosroc
Product Data (OpenAI Spec)
View Full JSON Spec ↗Specifications
| Condition | new |
|---|---|
| Category | Construction Materials > Concrete Repair & Restoration |
Product Intelligence
Paveroc: Rapid Setting Concrete Pavement Repair Mortar
I appreciate your interest in detailed technical information about Paveroc. However, based on the available documentation in the knowledge base, I have limited information about this product.
Available Information
From the knowledge base, Paveroc is identified as a construction product for which Nitobond AR can be used as a bonding agent. Nitobond AR is a single-component acrylic polymer emulsion that serves as a curing membrane and bonding agent for various Fosroc repair products.
Nitobond AR as a Bonding Agent for Paveroc
Nitobond AR Key Features:
- Single component - no site mixing required
- Ready to use - straight from container
- Cost effective - economical in use
- Easy application - spray application onto finished surfaces
- VOC Content: 13.5g/litre
Application Guidance:
Nitobond AR is sprayed onto the surface of the finished mortar in a continuous film. For optimal results:
- Surfaces should be clean and free from dust and contamination
- Large areas should be cured progressively (0.5m² at a time)
- Coverage rate: 6-8 m²/litre
- In fast drying conditions, supplementary curing with polythene sheeting is recommended
- Minimum application temperature: 5°C
Storage:
- Store in dry conditions between 5°C to 25°C in original unopened packaging
- Protect from frost
Limitations of Available Information
Comprehensive technical specifications, performance data, design criteria, and detailed features specific to Paveroc as a rapid setting concrete pavement repair mortar are not included in the current knowledge base. For complete technical details about Paveroc, including compressive strength, pot life, application rates, and other performance specifications, you would need to consult the dedicated Paveroc Technical Data Sheet or contact Fosroc directly.
References
- [1] Fosroc_Nitobond_AR_TDS.pdf