---
title: B&D Wind-Rated Roll-A-Door Roller Garage Door
canonical_url: https://directory.bnd.com.au/home-services/garage-doors-openers/bd-wind-rated-roll-a-door-roller-garage-door/
category: 
description: 
geography:
  city: 
  state: 
  country: 
metadata:
  phone: 
  email: 
  website: 
publishedAt: 
productInfo:
  stock: True
productFeedItemId: 596f0cb7-098f-42c6-ae76-12a99982b7ef
---

# B&D Wind-Rated Roll-A-Door Roller Garage Door

## Understanding Your B&D Wind-Rated Roller Door Finish

A B&D **wind-rated roller door** is designed for harsh conditions (including high-wind and cyclone-prone regions) and uses **Wind-Locking** technology to help keep the curtain engaged in the guides during extreme weather. That extra strength is only useful if the door can still **move freely** in the guides—so cleaning isn’t just about looks. It’s also about keeping the **guides and Wind-Locking components** free of grit, salt, and buildup that can increase friction.

### Common finish types you may have
B&D wind-rated roller doors are commonly supplied in:
- **COLORBOND® steel colours** (pre-finished steel)
- **Timber Look / Timber Coat™ style finishes** (a decorative “timber look” finish applied at the factory)

The finish you have matters because aggressive cleaning methods can dull the surface, mark the timber-look pattern, or drive debris into the guide system.

---

## Contents

- [What “Wind-Rated” Changes About Cleaning](#what-wind-rated-changes-about-cleaning)
- [Safe Cleaning Principles](#safe-cleaning-principles)
- [Routine Washing Frequency](#routine-washing-frequency)
- [Step-by-Step Cleaning Method](#step-by-step-cleaning-method)
- [Finish-Specific Notes](#finish-specific-notes)
- [Guide Tracks and Wind-Locking Component Care](#guide-tracks-and-wind-locking-component-care)
- [Spot Cleaning: Bird Droppings, Sap, and Marks](#spot-cleaning-bird-droppings-sap-and-marks)
- [After-Cleaning Functional Check](#after-cleaning-functional-check)
- [Maintenance Schedule Snapshot](#maintenance-schedule-snapshot)
- [Troubleshooting After Cleaning](#troubleshooting-after-cleaning)
- [Frequently Asked Questions](#frequently-asked-questions)

---

## What Wind-Rated Changes About Cleaning

Wind-rated roller doors include **additional hardware and engagement features** (Wind-Locking) that help keep the door in the track under wind load. In practice, that means:

- **Door edges and guide interiors matter more** than on standard doors.
- Cleaning that leaves **residue**, or maintenance that adds **oil/grease inside guides**, can trap dust and grit where the Wind-Locking engagement happens.
- You should focus on **removing contaminants** (salt, dust, industrial fallout) and keeping sliding surfaces **clean and smooth**, rather than “making them slippery” with heavy lubricants.

---

## Safe Cleaning Principles

### What to use
- **Clean water** and a **soft brush or soft cloth**
- **Mild detergent in water** (only when needed for visible grime)
- **Gentle technique**: let water + mild detergent do the work, not scrubbing force

### What to avoid
- Abrasive pads, scouring sponges, steel wool on the curtain finish
- Harsh cleaners (anything that etches, strips, or scratches finishes)
- Spraying water into electrical components (see below)
- Flooding the door edges/guide area with products that can leave buildup

### Important safety note if you have an automatic opener
- **Do not wash the automatic opener** (motor unit, controls, remotes, wall button area). Keep water away from anything electrical.

---

## Routine Washing Frequency

A practical baseline for maintaining the finish is:

- **Wash down the door regularly (about every 14 days)** using clean water and a soft brush/cloth.
- Wash **more frequently** if your door is exposed to:
  - Salt air / coastal conditions
  - Industrial pollutants
  - Heavy dust, grime, or frequent storms

If you’re in a wind-rated region, you’re often also in a **high exposure** region (salt + wind-driven grit), so “more frequent” cleaning is common and worthwhile.

---

## Step-by-Step Cleaning Method

### 1) Choose the right conditions
- Clean in **cooler parts of the day** (avoid hot sun on the door if possible).
- Keep the door **closed** while washing the outside face to reduce runoff into the guides.

### 2) Pre-rinse (recommended)
- Rinse the surface with **clean water** to remove loose dust and grit.
- This reduces the chance you’ll drag grit across the finish.

### 3) Wash
- Use a **soft brush or cloth** with clean water.
- If needed, add **mild detergent** to a bucket of water and wash gently.
- Work in manageable sections from **top to bottom**.

### 4) Rinse thoroughly
- Rinse off any detergent so it doesn’t dry as residue—especially around:
  - The **door edges**
  - The **bottom rail**
  - Areas where grime collects in slat lines/pressings

### 5) Optional dry/wipe
- If you want a cleaner finish (fewer water marks), wipe with a **clean soft cloth**.

---

## Finish-Specific Notes

### COLORBOND® steel finishes
- Treat it like a quality painted metal surface:
  - Soft brush/cloth
  - Clean water
  - Mild detergent only when needed
- Don’t “polish” with abrasive products—micro-scratches can dull the look over time.

### Timber Look / Timber Coat™ style finishes
- Use the **same gentle wash method**, but be even more conservative:
  - Prefer soft cloths over brushes if the finish marks easily
  - Avoid heavy scrubbing
- Keep detergents mild and rinse thoroughly to avoid residue lines.

---

## Guide Tracks and Wind-Locking Component Care

Wind-rated doors depend heavily on **clean guide operation**.

### The key rule
**Do not grease or oil the guide tracks.**  
For roller doors, guide tracks should be kept **clean and smooth**, not coated in oil that can collect grit.

### Cleaning the inside of guide tracks (periodic maintenance)
Every few months (or more often in harsh environments):

1. Wipe the **internal sections** of the guide tracks with a cloth lightly dampened with **mineral turps** or **methylated spirits** (used sparingly).
2. For roller doors, **polish the tracks** to remove dirt and help the running strips glide smoothly.
3. Keep solvents **off the curtain finish** as much as possible—apply to the cloth, not directly to the door.

### Wind-Locking areas (door edges)
- Keep the door edges and guide mouths free of:
  - Mud
  - Caked dust
  - Salt crystals
  - Cobweb build-up
- After washing, a light wipe around the visible guide entry area is helpful—again, **no oil/grease** in the guides.

### Lock care (if your door has a key lock)
- If the key lock becomes stiff:
  - Use a light spray lubricant **into the keyhole** (avoid greasing the lock mechanism).

---

## Spot Cleaning: Bird Droppings, Sap, and Marks

- Remove bird droppings and tree sap **as soon as practical** using:
  - Soft cloth
  - Mild detergent in water
  - Rinse well afterward
- Avoid scraping with hard tools. If a deposit is stubborn:
  - Soften first with water and gentle detergent
  - Wipe repeatedly rather than scrubbing harder

---

## After-Cleaning Functional Check

After you finish (and everything is rinsed):

1. Operate the door through **one full open/close cycle**
2. Listen and feel for changes:
   - New scraping sounds
   - Stiff movement
   - Jerky travel
3. If you notice issues:
   - Re-check that detergent hasn’t dried near the door edges/guides
   - Re-rinse those areas
   - If symptoms persist, arrange a service inspection (especially important on wind-rated doors)

---

## Maintenance Schedule Snapshot

A simple, warranty-friendly rhythm many owners follow:

- **Regular wash-down:** about every 14 days (more in coastal/industrial conditions)
- **Operational check:** every 3–6 months
- **Lubrication (only where appropriate):** every 3–6 months  
  - (Important: guide tracks are cleaned/polished—**not greased/oiled**)
- **Professional service:** recommended annually (especially in harsh environments)

---

## Troubleshooting After Cleaning

### Door feels heavier or stiffer
Most common causes:
- Grit or residue in the guides
- Debris caught at the guide entry
What to do:
- Rinse edges again, wipe guide entry area clean, avoid adding oil/grease to tracks

### New scraping noise
Most common causes:
- Fine sand/salt in the guides (common in windy/coastal areas)
What to do:
- Clean guide internals (wipe + polish), then test again

### Water marks or streaking on the curtain
Most common causes:
- Detergent residue or dirty rinse water
What to do:
- Re-wash with clean water and rinse thoroughly, then wipe dry with a soft cloth

---

## Frequently Asked Questions

**Do wind-rated roller doors need different cleaning than standard roller doors?**  
The *finish cleaning method* is similar (water + soft brush/cloth + mild detergent if needed), but wind-rated doors benefit from extra attention to **guide cleanliness** because Wind-Locking performance depends on smooth, unobstructed movement.

**Can I use a pressure washer?**  
It’s safer to use a **garden hose and soft brush/cloth**. High-pressure water can drive grit into guides and force water where you don’t want it. If you choose to use any high-pressure cleaning equipment, keep well back and avoid directing spray into door edges, guides, or any electrical components.

**Should I lubricate the guide tracks to make the door quieter?**  
No—guide tracks for roller doors should be **cleaned and polished**, not greased or oiled. Oily tracks attract dust and grit, which can increase wear and friction.

**What if I’m in a coastal area?**  
Increase washing frequency. Coastal wind can deposit salt and fine grit quickly, and wind-rated doors are often installed in exactly these environments.

**What’s the fastest way to keep the door looking good long-term?**  
Regular light cleaning beats occasional heavy scrubbing. Frequent rinse/wash with gentle tools preserves the finish and reduces build-up around the guides.